How To Edit the Sudoers File on Ubuntu and CentOS
原文地址：https://www.digitalocean.com/community/articles/how-to-edit-the-sudoers-file-on-ubuntu-and-centos
Introduction
Privilege separation is one of the fundamental security paradigms implemented in Linux and Unix-like operating systems. Regular users operate with limited privileges in order to reduce the scope of their influence to their own environment, and not the wider operating system.
A special user, called root, has "super-user" privileges. This is an administrative account without the restrictions that are present on normal users. Users can execute commands with "super-user" or "root" privileges in a number of different ways.
In this article, we will discuss how to correctly and securely obtain root privileges, with a special focus on editing the /etc/sudoers file.
We will be completing these steps on an Ubuntu 12.04 VPS, but most modern Linux distributions should operate in a similar manner.
This guide assumes that you have already completed the initial server setupdiscussed here. Log into your VPS as regular, non-root user.
How To Obtain Root Privileges
There are three basic ways to obtain root privileges, which vary in their level of sophistication.
Log In As Root
The simplest and most straight forward method of obtaining root privileges is simply to log into your VPS as root from the onset.
If you are using the "Console Access" button from the droplets page, simply enter "root" as the username and enter the root password when prompted.
If you are logging in through SSH, specify the root user prior to the IP address or host name in your connection parameters.
ssh root@
Again, enter the root password when prompted.
Use "su" to Become Root
Logging in as root is usually not recommended, because it is easy to begin using the system for non-administrative tasks, which is dangerous.
The next way to gain super-user privileges allows you to become the root user at any time, as you need it.
We can do this by invoking the su command, which stands for "substitute user". To gain root privileges, simply type:
suYou will be prompted for the root user's password, after which, you will be dropped into a root shell session.
When you have finished the tasks which require root privileges, return to your normal shell by typing:
exitUse "sudo" to Execute Commands as Root
The final, and most complex, way of obtaining root privileges that we will discuss is with the sudo command.
The sudo command allows you to execute one-off commands with root privileges, without the need to spawn a new shell. It is executed like this:
sudo
Unlike su, sudo will request the password of the user calling the command, not the root password.
Because of its security implications, sudo does not work by default, and must be set up before it functions correctly. If you followed the initial server setupguide, you already completed a bare-bones configuration.
In the following section, we will discuss how to modify the configuration in greater detail.
What is Visudo?
The sudo command is configured through a file located at /etc/sudoers.
Note: Never edit this file with a normal text editor! Always use the visudocommand instead!
Because improper syntax in the sudoers file can leave you with a system where it is impossible to obtain elevated privileges, it is important to use the visudo command to edit the file.
The visudo command opens a text editor like normal, but then validates the syntax of the file upon saving. This prevents configuration errors from blocking "sudo" operations, which may be your only way of obtaining root privileges.
Traditionally, visudo opens the /etc/sudoers file with the "vi" text editor. Ubuntu, however, has configured visudo to use the "nano" text editor instead.
If you would like to change it back to "vi", issue the following command:
sudo update-alternatives --config editorThere are 3 choices for the alternative editor (providing /usr/bin/editor).
Selection Path Priority Status
------------------------------------------------------------
* 0 /bin/nano 40 auto mode
1 /bin/nano 40 manual mode
2 /usr/bin/vim.basic 30 manual mode
3 /usr/bin/vim.tiny 10 manual modeSelect the number that corresponds with the choice you would like to make.
On CentOS, you can change this value by adding the following line to your ~/.bashrc:
export EDITOR=
Source the file to implement the changes:
. ~/.bashrcAfter you have configured visudo, execute the command to access the /etc/sudoers file:
sudo visudoHow To Modify the Sudoers File
You will be presented with the sudoers file in your selected text editor.
I have copied and pasted the file from Ubuntu 12.04, with comments removed (but including the addition we made in our initial server set up). The CentOS sudoers file has many more lines, some of which we will not discuss in this guide.
Defaults env_reset
Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
root ALL=(ALL:ALL) ALL
demo ALL=(ALL:ALL) ALL
%admin ALL=(ALL) ALL
%sudo ALL=(ALL:ALL) ALLLet's take a look at what these lines do.
Default Lines
The first line, "Defaults env_reset", resets the terminal environment to remove any user variables. This is a safety measure used to clear potentially harmful environmental variables from the sudo session.
The second line, which begins with "Defaults secure_path=...", specifies the PATH (the places in the filesystem the operating system will look for applications) that will be used for sudo operations. This prevents using user paths which may be harmful.
User Privilege Lines
The third and fourth lines, we are somewhat familiar with. The fourth line you added yourself, but you might not have investigated the details of what each portion was accomplishing.
ALL=(ALL:ALL) ALL
The first field indicates the username that the rule will apply to (demo).
demo =(ALL:ALL) ALL
The first "ALL" indicates that this rule applies to all hosts.
demo ALL=(:ALL) ALL
This "ALL" indicates that the demo user can run commands as all users.
demo ALL=(ALL:) ALL
This "ALL" indicates that the demo user can run commands as all groups.
demo ALL=(ALL:ALL)
The last "ALL" indicates these rules apply to all commands.
This means that our "root" and "demo" users can run any command using sudo, as long as they provide their password.
Group Privilege Lines
The last two lines are similar to the user privilege lines, but they specify sudo rules for groups.
Names beginning with a "%" indicate group names.
Here, we see the "admin" group can execute any command as any user on any host. Similarly, the "sudo" group can has the same privileges, but can execute as any group as well.
How To Set Up Custom Rules
Now that we have gotten familiar with the general syntax of the file, let's create some new rules.
How To Create Aliases
The sudoers file can be organized more easily by grouping things with various kinds of "aliases".
For instance, we can create three different groups of users, with overlapping membership:
User_Alias GROUPONE = abby, brent, carl
User_Alias GROUPTWO = brent, doris, eric,
User_Alias GROUPTHREE = doris, felicia, grantGroup names must start with a capital letter. We can then allow members of GROUPTWO to update apt-get's database by creating a rule like this:
GROUPTWO ALL = /usr/bin/apt-get updateIf we do not specify a user/group to run as, as above, sudo defaults to the root user.
We can allow members of GROUPTHREE to shutdown and reboot the machine by creating a "command alias" and using that in a rule for GROUPTHREE:
Cmnd_Alias POWER = /sbin/shutdown, /sbin/halt, /sbin/reboot, /sbin/restart
GROUPTHREE ALL = POWERWe create a command alias called "POWER" that contains commands to power off and reboot the machine. We then allow the members of GROUPTHREE to execute these commands.
We can also create "Run as" aliases, which can replace the portion of the rule that specifies the user to execute the command as:
Runas_Alias WEB = www-data, apache
GROUPONE ALL = (WEB) ALLThis will allow anyone who is a member of GROUPONE to execute commands as the "www-data" user or the "apache" user.
Just keep in mind that later rules will override earlier rules when there is a conflict between the two.
How To Lock Down Rules
There are a number of ways that you can achieve more control over how sudo reacts to a call.
The updatedb command associated with the "mlocate" package is relatively harmless. If we want to allow users to execute it with root privileges withouthaving to type a password, we can make a rule like this:
GROUPONE ALL = NOPASSWD: /usr/bin/updatedbNOPASSWD is a "tag" that means no password will be requested. It has a companion command called PASSWD, which is the default behavior. A tag is relevant for the rest of the rule unless overruled by its "twin" tag later down the line.
For instance, we can have a line like this:
GROUPTWO ALL = NOPASSWD: /usr/bin/updatedb, PASSWD: /bin/killAnother helpful tag is "NOEXEC", which can be used to prevent some dangerous behavior in certain programs.
For example, some programs, like "less", can spawn other commands by typing this from within their interface:
!
This basically executes any command the user gives it with the same permissions that "less" is running under, which can be quite dangerous.
To restrict this, we could use a line like this:
username ALL = NOEXEC: /usr/bin/lessMiscellaneous Information
There are a few more pieces of information that may be useful when dealing with sudo.
If you specified a user or group to "run as" in the configuration file, you can execute commands as those users by using the "-u" and "-g" flags, respectively:
sudo -u run_as_user command
sudo -g run_as_group commandFor convenience, by default, sudo will save your authentication details for a certain amount of time in one terminal. This means you won't have to type your password in again until that timer runs out.
For security purposes, if you wish to clear this timer when you are done running administrative commands, you can run:
sudo -kIf you are simply wondering what kind of privileges are defined for your username, you can type:
sudo -lThis will list all of the rules in the /etc/sudoers file that apply to your user. This gives you a good idea of what you will or will not be allowed to do with sudo as any user.
There are many times when you will execute a command and it will fail because you forgot to precede it with "sudo". To avoid having to re-type the command, you can take advantage of a bash functionality that means "repeat last command":
sudo !!The double exclamation point will repeat the last command. We preceded it with sudo to quickly change the unprivileged command to a privileged command.
For some fun, you can add the following line to your sudoers file with visudo:
sudo visudoDefaults insultsThis will cause sudo to return a silly insult when a user types in an incorrect password for sudo. We'll use sudo -k to clear the previous sudo cached password to try it out:
sudo -k
sudo ls[sudo] password for demo: # Your mind just hasn't been the same since the electro-shock, has it? [sudo] password for demo: My mind is going. I can feel it.
Conclusion
You should now have a basic understanding of how to read and modify the sudoers file, and a grasp on the various methods that you can use to obtain root privileges.
Remember, super-user privileges are not given to regular users for a reason. It is essential that you understand what each command does that you execute with root privileges. Do not take the responsibility lightly. Learn the best way to use these tools for your use-case, and lock down any functionality that is not needed.
By Justin Ellingwood
================================================
note:
sudo vim /etc/sudoers:
（1）为用户指定sudo权限
root ALL=(ALL:ALL) ALL
用户名 任何主机=(任何用户:任何用户组) 任何命令
（2）为用户组指定sudo权限
以%开头接组名，用来指定组的sudo权限。
%admin ALL=(ALL) ALL
%sudo ALL=(ALL:ALL) ALL
================================================