Debian 系统 Nagios+Centreon+Nrpe集成
操作系统 |
debian-6.0.5-amd64-DVD-1 |
|
Centreon |
centreon-2.3.9.tar.gz |
|
Nagios |
nagios-3.4.1.tar.gz |
源码安装 |
Nagios插件 |
nagios-plugins-1.4.16.tar.gz |
|
Ndoutils |
ndoutils-1.5.2.tar.gz |
|
Nrpe |
nrpe-2.13.tar.gz |
|
MySQL |
mysql-5.5.15.tar.gz |
|
Program groups |
Command |
System base |
apt-get install sudo tofrodos bsd-mailx lsb-release heirloom-mailx build-essential |
Database server |
apt-get install mysql-server libmysqlclient16 libmysqlclient-dev libmysql++-dev ###备注:这是在线安装内容,红色字体内容是源码安装mysql5.5.15后也需要安装的内容 |
WebServer and PHP5 |
apt-get install apache2 apache2-mpm-prefork php5 php5-mysql php-pear php5-ldap php5-snmp php5-gd |
RRDTools |
apt-get install rrdtool librrds-perl ### 备注:安装后路径:/usr/bin/rrdtool |
Perl modules |
apt-get install libconfig-inifiles-perl libcrypt-des-perl libdigest-hmac-perl libdigest-sha1-perl libgd-gd2-perl |
SNMP |
apt-get install snmp snmpd libnet-snmp-perl libsnmp-perl |
GD-libraries and othes pack |
apt-get install libgd2-xpm libgd2-xpm-dev libpng12-dev fping libmcrypt4 libldap2-dev libgnutls-dev libssl-dev smbclient libpq-dev libradiusclient-ng-dev dbi-link |
源码安装省略……
# insserv mysqld //创建自启动
# insserv -d mysqld
# mysqladmin -u root password '111111' //修改root密码
### 版本:nagios-3.4.1.tar.gz
下载地址:http://www.nagios.org/download/
http://sourceforge.net/projects/nagios/files/
# apt-get install nagios3 //在线安装
# /usr/sbin/useradd -m nagios //以下是源码安装
# /usr/sbin/groupadd nagcmd
# /usr/sbin/usermod -G nagios,nagcmd www-data
# tar zxvf nagios-3.4.1.tar.gz
# cd nagios/
# ./configure --prefix=/usr/local/nagios --with-command-group=nagcmd --enable-nanosleep --enable-event-broker
# make all
# make install
# make install-init
# make install-commandmode
# make install-config
# make install-webconf
# htpasswd -c /usr/local/nagios/etc/htpasswd.users nadmin
# htpasswd -c /etc/nagios3/htpasswd.users nadmin //在线安装时
//创建nogios登陆用户名和密码,apache自动安装后/usr/bin/htpasswd路径
# vim /etc/rc.local //设置nagios自启动
/etc/init.d/nagios start
# vim /usr/local/nagios/etc/cgi.cfg
use_authentication=0 //修给cgi权限验证问题
# vim /usr/local/nagios/etc/nagios.cfg //待定
//验证nagios配置文件是否正确
# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg -d
### 版本:nagios-plugins-1.4.16.tar.gz
# tar zxvf nagios-plugins-1.4.16.tar.gz
# cd nagios-plugins-1.4.16
# ./configure --with-nagios-user=nagios --with-nagios-group=nagios --with-openssl=/usr/bin/openssl --enable-perl-modules
# make
# make install
### 版本:nrpe-2.13.tar.gz
下载地址:http://sourceforge.net/projects/nagios/files/nrpe-2.x/
# apt-get install nagios-nrpe-server nagios-nrpe-plugin //在线安装
# tar zxvf nrpe-2.13.tar.gz //以下为源码安装
# cd nrpe-2.13
# ./configure
# make all
# make install-plugin
# make install-daemon
# make install-daemon-config
# vim /usr/local/nagios/etc/nrpe.cfg
### 备注,在线安装目录:/etc/nagios/nrpe.cfg
server_address=192.168.113.5 //修改nrpe服务器IP地址
allowed_hosts=127.0.0.1,192.168.113.5 //允许访问的IP地址
//nrpe启动并测试是否启动成功,且加入/etc/rc.local使得开机自启动
# /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d
# netstat -antup |grep 5666
//验证客户端nrpe是否正常连接,显示:NRPE v2.13 说明服务正常
# /usr/local/nagios/libexec/check_nrpe -H 192.168.113.5
# /usr/lib/nagios/plugins/check_nrpe -H 192.168.113.5 //在线安装路径
### 版本:ndoutils-1.5.2.tar.gz
下载地址:http://sourceforge.net/projects/nagios/files/ndoutils-1.x/
# apt-get install ndoutils-nagios3-mysql //在线安装
# tar zxvf ndoutils-1.5.2.tar.gz //以下是源码安装
# cd ndoutils-1.5.2
#./configure --prefix=/usr/local/nagios/ --enable-mysql \
--with-ndo2db-user=nagios --with-ndo2db-group=nagios \
--with-mysql-lib=/usr/local/mysql/lib/mysql \
--with-mysql-inc=/usr/local/mysql/include/mysql \
# make
# make install
# cp ./config/ndo2db.cfg-sample /usr/local/nagios/etc/ndo2db.cfg
# cp ./config/ndomod.cfg-sample /usr/local/nagios/etc/ndomod.cfg
# cp src/ndomod-3x.o /usr/local/nagios/bin/
# cp src/ndo2db-3x /usr/local/nagios/bin/
# chmod 774 /usr/local/nagios/bin/ndo*
# chown nagios:nagios /usr/local/nagios/bin/ndo*
# chown nagios:nagios /usr/local/nagios/etc/ndo*
# cp ./daemon-init.in /etc/init.d/ndo2db
# chmod +x /etc/init.d/ndo2db
# insserv ndo2db
# insserv -d ndo2db
//创建数据库且导入库内容
mysql> create database nagios;
./installdb -u root -p 111111 -h localhost -d nagios
或者:
# cd /root/ndoutils-1.5.2/db
# mysql -uroot -p nagios<./mysql.sql
# vim /usr/local/nagios/etc/nagios.cfg
broker_module=/usr/local/nagios/bin/ndomod-3x.o
config_file=/usr/local/nagios/etc/ndomod.cfg
### 备注:以上内容是一行连接的,中间使用空格隔开的
# vim /usr/local/nagios/etc/ndo2db.cfg
socket_type=tcp
#socket_name=/usr/local/nagios/var/ndo.sock
db_user=root
db_pass=111111
# vim /usr/local/nagios/etc/ndomod.cfg
output=127.0.0.1
#output=/usr/local/nagios/var/ndo.sock
output_type=tcpsocket
#output=/usr/local/nagios/var/ndo.sock
# touch /usr/local/nagios/var/ndo2db.debug
# chown nagios:nagios /usr/local/nagios/var/ndo2db.debug
# vim /etc/init.d/ndo2db //修改内容如下:
servicename=ndo2db
prefix=@prefix@
exec_prefix=${prefix}
#Ndo2dbBin=@bindir@/ndo2db
Ndo2dbBin=/usr/local/nagios/bin/ndo2db-3x
Ndo2dbCfgFile=@sysconfdir@/ndo2db.cfg
Ndo2dbCfgFile=/usr/local/nagios/etc/ndo2db.cfg
Ndo2dbVarDir=@localstatedir@
#Ndo2dbRunFile=$Ndo2dbVarDir/ndo2db.lock
Ndo2dbRunFile=/usr/local/nagios/var/ndo2db.lock
Ndo2dbLockDir=/var/lock/subsys
Ndo2dbLockFile=ndo2db
Ndo2dbUser=nagios
Ndo2dbGroup=nagios
//测试启动否
# /etc/init.d/ndo2db start 或者如下测试:
# /usr/local/nagios/bin/ndo2db-3x -c /usr/local/nagios/etc/ndo2db.cfg
# netstat -antup |grep 5668 //查看端口是否打开
# tail -f /usr/lcoal/nagios/var/nagios.log //出现以下提示则启动成功
ndomod: Successfully connected to data sink. 5000 queued items to flush.
ndomod: Successfully flushed 5000 queued items to data sink.
Event broker module '/usr/local/nagios/bin/ndomod-3x.o' initialized successfully.
Finished daemonizing... (New PID=9807)
//查看数据库表nagios.nagios_hosts是否写入数据
mysql> select host_id,address,display_name from nagios_hosts;
+---------+-----------+--------------+
| host_id | address | display_name |
+---------+-----------+--------------+
| 3 | 127.0.0.1 | localhost |
+---------+-----------+--------------+
1 row in set (0.00 sec)
//在线安装启动/etc/init.d/ndoutils start前,需要编辑:
# vim /etc/default/ndoutils
ENABLE_NDOUTILS=1 //修改成 1
//问题解决:
问题(1)./installdb nagios数据库时报:
failed: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) at ./installdb line 41
解决:# mkdir -p /var/run/mysqld
# ln -s /tmp/mysql.sock /var/run/mysqld/mysqld.sock
问题(2)./installdb nagios数据库时报:
DBD::mysql::db do failed: Table 'nagios.nagios_dbversion' doesn't exist at ./installdb line 51.
解决:可以忽略,核实nagios数据库59个表即可
问题(3)tail -f nagios.log时,提示:
ndomod: Could not open data sink!或ndomod: Still unable to connect to data sink.
解决:按照以上操作,且进程ps均可见,则尝试重启ndo2db 或nagios或mysql
### 版本:centreon-2.3.9.tar.gz
下载地址:http://www.centreon.com/Content-Download/donwload-centreon
安装参考文档:(1)http://documentation.centreon.com/01-centreon/centreon_web/documentation/01-setup/installation_from_sources/step_05_-_centreon
(2)http://blog.sina.com.cn/s/blog_5611597901016qd2.html
# tar zxvf centreon-2.3.9.tar.gz
# cd centreon-2.3.9
# ./install.sh -i //以下是安装过程中需要根据实际路径修改的地方,其他均为y 回车(当然你也可以自己定制)
Where is your NDO ndomod binary ?
default to [/usr/sbin/ndomod.o]
> /usr/local/nagios/bin/ndomod.o
/usr/local/nagios/bin/ndomod.o OK
(1)以下服务均已启动
# /etc/init.d/apache2 start
# /etc/init.d/mysqld start
# /etc/init.d/ndo2db start
# /etc/init.d/nagios start
(2)开始安装:http://192.168.113.5/centreon/
### 备注参考内容:
http://documentation.centreon.com/01-centreon/centreon_web/documentation/01-setup/installation_from_sources/step_05_-_centreon
http://blog.sina.com.cn/s/blog_5611597901016qd2.html
### 部分配图:其他基本next
图示1:mysql root密码填写,三个新库密码设置
图示2:配置centreon管理员用户、密码、其他三项自定义
Centreon安装时,其他应用在线安装的,需要修改以下可能出现的路径问题:
Where is installed Nagios ?
default to [/usr/local/nagios]
> /usr/share/nagios3/
Path /usr/share/nagios3/ OK
Where is your nagios config directory
default to [/usr/local/nagios/etc]
> /etc/nagios3
Path /etc/nagios3 OK
Where is your Nagios var directory ?
default to [/usr/local/nagios/var]
> /var/log/nagios3/
Path /var/log/nagios3/ OK
Where is your Nagios plugins (libexec) directory ?
default to [/usr/local/nagios/libexec]
> /usr/lib64/nagios/plugins
Path /usr/lib64/nagios/plugins OK
/usr/sbin/nagios3 OK
Where is your Nagios image directory ?
default to [/usr/local/nagios/share/images/logos]
> /usr/share/nagios3/htdocs/images/logos/
Path /usr/share/nagios3/htdocs/images/logos/ OK
Where is your NDO ndomod binary ?
default to [/usr/sbin/ndomod.o]
> /usr/lib/ndoutils/ndomod-mysql-3x.o
/usr/lib/ndoutils/ndomod-mysql-3x.o OK
### 参考链接:http://www.xodino.it/?page_id=968
Finalize Centreon configuration:
Open in webrowser: "http://<yourserverip>/centreon/", replace "<yourserverip>" with your Centreon server ip address or hostname.
Go to: Configuration -> Nagios -> cgi (in sidebar), Press on "CGI.cfg" link
Change settings to some options, as writed below:
- Physical HTML Path: /usr/share/nagios3/htdocs
- URL HTML Path : /nagios3
- Nagios Process Check Command: /usr/lib/nagios/plugins/check_nagios /var/cache/nagios3/status.dat 5 '/usr/sbin/nagios3'
Press Save
Go to: Configuration -> Nagios -> nagios.cfg (in sidebar), Press on "Nagios CFG 1" link, you should be in "Files" section of the configuration screen.
Make sure to set folowing configuration values:
- Log File : /var/log/nagios3/nagios.log
- Downtime File : /var/lib/nagios3/downtime.dat
- Comment File : /var/lib/nagios3/comment.dat
- Temp File : /var/cache/nagios3/nagios.tmp
- P1 File : /usr/lib/nagios3/p1.pl
- Lock File : /var/run/nagios3/nagios3.pid
- Object Cache File : /var/cache/nagios3/objects.cache
- Status File : /var/cache/nagios3/status.dat
- External Command File : /var/lib/nagios3/rw/nagios.cmd
Now Press on "Logs Options" tab to go to "Logs Options" section.
Make sure to set folowing configuration values:
- Log Archive Path : /var/log/nagios3/archives/
- State Retention File : /var/lib/nagios3/retention.dat
Press Save
Go to: Administration -> Options -> CentStorage (in sidebar)
Make sure to set folowing configuration values:
- Nagios current log file to parse: /var/log/nagios3/nagios.log
Press Save
Now let's apply our changes, go to: Configuration -> Nagios
Select as below:
- Generate Configuration Files
- Include Comments
- Run Nagios debug (-v)
- Move Export Files
- Restart Nagios
- Method: "External Command"
Press Export
This will restart Nagios & apply all changes you made in Web Interface.
You will do it every time you make changes, e.g. adding/modifying of hosts, commands, contacts, services...etc...
The installation of Centreon is completed.
Final fixes (very important):
Go to terminal console, then...
In Debian/Ubuntu the user "nagios" is set to "/bin/false" shell. Because of it "centcore" and "centstorage" daemons won't start. A reason for that is because those daemons use "su -c" command which requires a real shell, so the shell for
"nagios" user must be set to "/bin/sh":
# usermod -s /bin/sh nagios
Apply permissions for Web interface to be able to send "External Commands", perform the following commands to change directory permissions and to make the changes permanent:
# invoke-rc.d nagios3 stop
# dpkg-statoverride --update --add nagios www-data 2710 /var/lib/nagios3/rw
# dpkg-statoverride --update --add nagios nagios 751 /var/lib/nagios3
Add htaccess user with password "P@ssw0rd" for nagios CGI:
# htpasswd -bc /etc/nagios3/htpasswd.users nagiosadmin P@ssw0rd
Allow SNMP readonly access:
# echo "rocommunity public" > /etc/snmp/snmpd.conf
If you want to allow SNMP access only for localhost then use this instead:
# echo "rocommunity public 127.0.0.1" > /etc/snmp/snmpd.conf
# ls -al /usr/lib/nagios/plugins //查看权限,需要具有sudo权限
# cd /usr/lib/nagios/
# chmod -R u+s plugins //权限修改成 :-rwsr-xr-x
### 不修改权限会报:Warning: This plugin must be either run as root or setuid root.
Now, restart the server
# reboot
(1)报错解决:
Error: Could not create external command file '/var/log/nagios3/rw/nagios.cmd'
解决:mkdir /var/log/nagios3/rw
Chown nagios.nagios rw
(2)在线安装ndoutils,启动ndo2前一定要修改:/etc/default/ndoutils
ENABLE_NDOUTILS=1
### 说明,debian操作系统下安装比较麻烦,建议还是用我参考的完整系统吧呵呵!
本文出自 “老瓦房” 博客,请务必保留此出处http://laowafang.blog.51cto.com/251518/1001856