FC Setup for openfiler 2.99

苦于用做虚拟集群存储的openfiler只配了ipsan，读写性能低下，故打算改HBA卡挂FC-san，国内对应资料很少，所以搬运来步骤：

 

 

1. cat /sys/class/fc_host/hostX/port_name  查看WWN号

 

2. Edit /etc/init.d/scst and change the chkconfig to # chkconfig: - 99 36

 

3. chkconfig scst on

 

4. service scst start

 

5. scstadmin -write_config /etc/scst.conf     保存配置

 

6.scstadmin -add_group FC-SAN -driver qla2x00t -target 21:00:00:24:ff:2f:1e:86    建立并划光口进组

 

7.scstadmin -add_init 50:01:43:80:06:37:07:76 -driver qla2x00t -target 21:00:00:24:ff:2f:1e:86 -group DASBOOT              匹配两端到组

等待openfiler  更新

 

 

 

8.lvdisplay         查看分区卷状态

 

 

9.scstadmin -open_dev 6t1 -handler vdisk_blockio -attributes filename=/dev/fc-san/6t1      挂载6T1分区

 

10.scstadmin -add_lun 0 -driver qla2x00t -target 21:00:00:24:ff:2f:1e:86 -group FC-SAN -device 6t1                      绑定lun

 

11.保存配置文件

scstadmin -write_config /etc/scst.conf