suse_server_11_sp1_rdac安装

 1.检查系统的版本

uname -r

2.确保以下依赖包已安装

gcc

glibc-devel

kernel-headers

glibc-headers

glibc-devel

libgomp

kernel-devel 或 kernel-xen-devel（如果使用启用 Xen 的内核的话）

2.驱动下载

http://www.lsi.com/sep/Pages/rdac/ds4000.aspx

注：2.6内核链接

http://www.lsi.com/sep/Documents/rdac/rdac-LINUX-09.03.0C05.0504-source.tar.gz

3.解压缩包

tar -zxvf rdac-LINUX-09.03.0C05.0331-source.tar.gz

4.进入目录

cd linuxrdac-09.03.0C05.0331

5.编译

make

6.安装

make install  

7.修改启动文件

vim /boot/grub/menu.lst

打开里面的文件，在最后面加入红色的启动项，把default的0改成2

default 2

timeout 8

gfxmenu (hd0,6)/message

##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###

title SUSE Linux Enterprise Server 11 SP1 - 2.6.32.12-0.7

    root (hd0,6)

    kernel /vmlinuz-2.6.32.12-0.7-default root=/dev/disk/by-id/scsi-36d4ae5206f48cb0016a83fdb10c88adf-part1 resume=/dev/disk/by-id/scsi-36d4ae5206f48cb0016a83fdb10c88adf-part5 splash=silent crashkernel=256M-:128M showopts vga=0x31a

    initrd /initrd-2.6.32.12-0.7-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###

title Failsafe -- SUSE Linux Enterprise Server 11 SP1 - 2.6.32.12-0.7

    root (hd0,6)

    kernel /vmlinuz-2.6.32.12-0.7-default root=/dev/disk/by-id/scsi-36d4ae5206f48cb0016a83fdb10c88adf-part1 showopts ide=nodma apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a

    initrd /initrd-2.6.32.12-0.7-default

title SUSE Linux Enterprise Server 11 SP1 - 2.6.32.12-0.7 with mpp

    root (hd0,6)

    kernel /vmlinuz-2.6.32.12-0.7-default root=/dev/disk/by-id/scsi-36d4ae5206f48cb0016a83fdb10c88adf-part1 resume=/dev/disk/by-id/scsi-36d4ae5206f48cb0016a83fdb10c88adf-part5 splash=silent crashkernel=256M-:128M showopts vga=0x31a

    initrd /mpp-2.6.32.12-0.7-default.img

~

8.重新启动即可

验证：

查看MPP版本

mppUtil –V

查看lun的情况

mppUtil –a

注：mpp-2.6.32.12-0.7-default.img文件在/boot目录下面