最近测试组要求提供Windows Server 2012 Release Candidate版本测试环境。。。
真心坑爹。
------------开始部署--------------------
管理:VMvcenter
虚拟平台VMEsxi5.0
网络环境cisco3560
后端存储FC-HBA+openfiler
-------------------------------------------------
第一个注意点:
Windows Server 2012 Release Candidate的安装,经过反复测试,确定需要首先选择
win2008R2(64位)。
第二个注意点:
Esxi5.0不支持,必须升级到Esxi5.0U1以上版本。否则在安装文件载入前无限蓝屏循环 是这个样子---> ): ......
第三个注意点:
以上都没问题,安装后仍然出现反复重启(实际测试中我没有遇到,但是有一定中枪几率),官方给出的KB链接 http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=2021887 ,我贴出来说明下:
KB 1/2
- •Change the virtual machine to use EFI instead of BIOS. #修改BIOS引导方式
- 1.Right-click the virtual machine and click Power > Shut Down Guest. #VM关机
- 2.Right-click the virtual machine and click Edit Settings. #编辑故障VM配置文件
- 3.Click the Options tab. #选项
- 4.Click Boot Options. #引导项
- 5.Click EFI under Firmware. #选择EFI
- 6.Click OK.
- 7.Power on the virtual machine. #VM开机
KB 2/2
- •Add vmGenCounter.enable = FALSE to the .vmx file of the virtual machine. #修改.vmx文件方式
- 1.Right-click the virtual machine and click Power > Shut Down Guest. #关机
- 2.Right-click the virtual machine and click Edit Settings. #老规矩,编辑VM配置
- 3.Click the Options tab. #选项
- 4.Under Advanced, click General. #高级--常规选项卡
- 5.Click Configuration Parameters. #点击 配置参数 按钮
- 6.Click Add Row. #添加
- 7.Under name, enter vmGenCounter.enable #新建列,命名为 vmGenCounter.enable (注意最后面没小数点)
- 8.Under value, enter False #值为 False
- 9.Click OK to save the changes and then close the window. #保存
- 10.Power on the virtual machine. #继续折腾。。。
第四个注意点:
模版部署的时候必须模版已经装好VMtools才能自定义,
(PS:其实因为没有新的针对2012RC的自定义工具其实完全没效果)
这就牵涉到另一个坑爹的地方,VMtools和2012有不和谐的地方,导致不能正常“合体”,很多人反馈说安装VMtools后VM再次启动后会黑屏/蓝屏重启。。。(
实际测试中我没有遇到,经常请客吃饭涨RP有么有?!
)怎么办?看下面的~!
第五个注意点:
Windows Server 2012 Release Candidate 下安装VMtools的保险步骤(任选一个)
1.vm配置中显卡改为自动选择设置
2.先安装桌面体验,打开aero透明,然后安装vm tools (注意:rtm版8/server2012已没有aero特效 )
3.不安装VMtools也可以,性能略有下降。
不安装VMtools的版本和安装VMtools的版本一样运行,经过反复测试再没有菊花了。RTM版本还是残念。。。
----------------------收工-------