3Com PXE Server & Ghost 远程克隆方案摘要

建立内含ghost的启动镜像

clip_image001

选择TCP/IP Network Boot Image

clip_image002

选择网卡类型:不成功则换。

clip_image003

然后默认选择,到下面,这里可以加入dos下的分区管理软件,如diskgen pm等。

clip_image004

选择IMG文件的路径为3Com Boot Service 里面的TFTP的根目录下,IMG Finish。

clip_image005

打开Boot Image Editor,选择Create a PXE menu boot file:

clip_image006

Add 刚才的Image:

clip_image007

Save为PEX文件,同样保存在TFTP的根目录

clip_image008

打开Bootptab Editor, 加入主机的MAC和要使用的PEX Image文件。

clip_image009

clip_image010

启动TFTP和PXE Server,启动客户端,顺利连接到GhostCast Server, OK.

PEX Server 启动会检测DHCP,如果本机不是DHCP Server,则启动DHCP Proxy。

你可能感兴趣的:(职场,ghost,休闲,pxe)