mongodb-2.0.5的安装与启动

Mongodb2.0.5版本安装

一：安装Python
Version:Python2.6
http://www.python.org/ftp/python/
tar zxvf Python-2.6.6.tgz
./configure –-enable-shared
make
sudo make instal
cat /etc/ld.so.conf
在/etc/ld.so.conf 中添加 /usr/local/lib一行
sudo ldconfig

二：Scons安装
$ tar zxvf scons-2.0.1.tar.gz
$ sudo python setup.py install
sudo vim /usr/bin/scons 或者 vim /usr/local/bin/scons
修改内容如下
#！/usr/bin/env python2.6

sudo yum -y install boost-devel pcre-devel js-devel readline-devel ncurses-devel

三：Spider Monkey安装
Version:js-1.7.0
$ wget http://ftp.mozilla.org/pub/mozilla.org/js/js-1.7.0.tar.gz
$ cd /home/webuser/software/mongodb/js/src
$ export CFLAGS="-DJS_C_STRINGS_ARE_UTF8"
$ make -f Makefile.ref
$ sudo JS_DIST=/usr make -f Makefile.ref export

sudo yum remove boost*i386             //卸载32位程序包   rpm -qa查看状态
sudo yum remove pcre*i386  boost*i386    ncurses*i386 readline*i386
sudo yum remove ncurses*i386
sudo yum remove readline*i386
---------------------------------------------
sudo yum remove pcre-devel             //卸载64位开发包
sudo yum remove boost-devel
sudo yum remove ncurses-devel pcre-devel boost-devel readline-devel
 sudo yum remove readline-devel
 --------------------------------------------
sudo yum install pcre-devel*x86*      //安装64位开发包
sudo yum install boost-devel*x86*
sudo yum install ncurses-devel*x86*   pcre-devel*x86* boost-devel*x86*  readline-devel*x86*
sudo yum install readline-devel*x86*
---------------------------------------------
sudo ldconfig
---------------------------------------------

四：Boost安装
下载 boost_1_48_0.tar.gz源码包
tar zxvf boost_1_48_0.tar.gz
cd boost_1_48_0/
./bootstrap.sh
在当前目录下会生成b2的编译文件,然后执行
./b2

编译成功会出现如下:
the boost C++ Libraries were successfull built

the following directory should be added to compiler include paths:
...................
the following directory should be added to linker library paths:

sudo cp -R boost/  /usr/include    ----注意一定要拷贝完  -安装的时候复制粘贴吧，避免出错！
sudo cp stage/lib/*  /usr/lib/
sudo ldconfig

五：Mongodb的安装
tar zxvf mongodb-src-r2.0.5.tar.gz
scons --64 --extrapath=/usr --libpath=/usr/lib64 --full --release --static all
scons --prefix=/opt/mongodb --64 --extrapath=/usr --libpath=/usr/lib64 --full --release --static install

mkdir /opt/mongodb/{etc,log,repair,data}
cd /opt/mongodb/etc/

六：Mongodb配置文件
dbpath = /opt/mongodb/data
#repairpath = /opt/mongodb/repair 仅当Mongodb数据库有问题需要修复时使用
logpath = /opt/mongodb/log/mongodb.log
pidfilepath = /opt/mongodb/log/mongodb.pid
unixSocketPrefix = /opt/mongodb/log
directoryperdb = true
auth = true
#sysinfo = true
#verbose = true
logappend = true
#cpu = true
#Network and security set
noauth = true
port = 33111
maxConns = 1024
fork = true
#Management
#nohttpinterface = true
rest = true
quota = true
quotaFiles = 1024
nssize = 16
#syncdelay = 5

最后:service mongod start 启动mongod 服务

七:配置Mongodb启动
vim /etc/init.d/mongod
chmod u+x /etc/init.d/mongod
chkconfig --add mongod

附上mongodb启动脚本:
#!/bin/bash
#&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
#Author:gaohaicang            &
#Company: dzh                 &
#Date:2013-1-15               &
#Version:1                    &
#&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
# description: mongodb server SysV script
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
#Set PATH ENV
PATH=$PATH:/bin:/usr/bin:/usr/local/bin:/sbin:/usr/sbin:/usr/local/sbin
#Set mongod
mongod=/opt/mongodb/bin/mongod
prog=mongod
lockfile=/opt/mongodb/data/db/mongod.lock
pidfile=/opt/mongodb/log/mongodb.pid
# config: /opt/mongod/etc/mongod
RETVAL=0
OPTIONS="--fork --logpath=/opt/mongodb/log/mongod.log --config /opt/mongodb/etc/mongodb"
start()
{
      echo -n $"Starting $prog: "
      daemon  $mongod $OPTIONS
      daemon $mongd
      RETVAL=$?
      echo
      [ $RETVAL = 0 ]
      return $RETVAL
}
stop()
{
 MONGOPID=`cat "$pidfile"  2>/dev/null `
        if [ -n "$MONGOPID" ]; then
            /bin/kill "$MONGOPID" >/dev/null 2>&1
            ret=$?
            if [ $ret -eq 0 ]; then
                STOPTIMEOUT=60
                while [ $STOPTIMEOUT -gt 0 ]; do
                    /bin/kill -0 "$MONGOPID" >/dev/null 2>&1 || break
                    sleep 1
                    let STOPTIMEOUT=${STOPTIMEOUT}-1
                done
                if [ $STOPTIMEOUT -eq 0 ]; then
                    echo "Timeout error occurred trying to stop Mongod Daemon."
                    ret=1
                    action $"Stopping $prog: " /bin/false
                else
                    rm -f /opt/mongod/data/mongod.lock
                    action $"Stopping $prog: " /bin/true
                fi
            else
                action $"Stopping $prog: " /bin/false
            fi
        else
            ret=1
            action $"Stopping $prog: " /bin/false
        fi
        return $ret
}
status()
{
    echo -n $"$prog status is "
    netstat -tnlp|grep "$prog" >/dev/null
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        echo -e "\033[32m running \033[0m"
    else
        echo -e "\033[31m stop \033[0m"
    fi
}
case "$1" in
      start)
      start ;;
      stop)
      stop ;;
      restart)
      stop
      start  ;;
      status)
      status -p ${lockfile} $mongod
      RETVAL=$? ;;
       *)
          echo $"Usage: $prog {start|stop|restart|status|}"
      exit 1
esac