4.华为交换机知识【Hybrid】

 任务：将Hybrid类型接口加入vlan

认为已经建立好vlan 10 20

1.进入系统视图                                   system-view

2.进入接口视图                                   interface giga 0/0/2

3.设置接口为hybrid类型                       port link-type hybrid
4.将接口以tagged方式加入vlan 10         port hybrid tagged vlan 10

5.将接口以untagged方式加入vlan 20      port hybrid untagged vlan 20
6.退出并保存

注意：默认情况下接口类型为hybrid类型，以untagged方式加入vlan

         tagged与untagged的区别，电脑网卡可以直接识别untagged方式的数据而无法识别tagged方式的数据

 

在eNSP模拟器上的命令如下

<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]interface giga 0/0/2
[Huawei-GigabitEthernet0/0/2]port link-type hybrid
[Huawei-GigabitEthernet0/0/2]port hybrid tagged vlan 10
[Huawei-GigabitEthernet0/0/2]port hybrid untagged vlan 20
[Huawei-GigabitEthernet0/0/2]return
<Huawei>save
The current configuration will be written to the device.
Are you sure to continue?[Y/N]y
Now saving the current configuration to the slot 0.
Save the configuration successfully.