Solaris 11的IP配置

Oracle Solaris 11较之以前SUN的Solaris 10有很大的改变，现在把Solaris 11的IP配置转载如下，以供参考：

1.从自动网络配置模式转换为手动配置模式

验证NCP

1.netadm list

1.netadm enable -p ncp DefaultFixed

2.确认DefaultFixed模式可用

1.netadm list

2.netadm: DefaultFixed NCP is enabled;

3.automatic network management is not available.

4.netadm list' is only supported when automatic network management is active.

3.确认要配置的接口

1.# dladm show-phys

4.配置net0

1.# ipadm create-ip net0

2.# ipadm create-addr -T static -a 192.168.56.200/24 net0/v4

3.# ipadm show-addr

5.配置网关

1.# route -p add default 12.34.56.1

6.配置DNS

1.root@solaris:~# svccfg -s dns/client

2.svc:/network/dns/client> setprop config/nameserver = (8.8.8.8 8.8.4.4)

3.svc:/network/dns/client> listprop config

4.config application

5.config/value_authorization astring solaris.smf.value.name-service.dns.client

6.config/nameserver net_address 8.8.8.8 8.8.4.4

7.svc:/network/dns/client> exit

8.root@solaris:~#

9.root@solaris:~# svcadm refresh dns/client

10.root@solaris:~# svcadm restart dns/client

7.配置name-server

1.root@solaris:~# svccfg -s name-service/switch

2.svc:/system/name-service/switch> setprop config/host = "files dns"

3.svc:/system/name-service/switch> listprop config

4.config application

5.config/default astring files

6.config/value_authorization astring solaris.smf.value.name-service.switch

7.config/printer astring "user files"

8.config/host astring "files dns"

9.svc:/system/name-service/switch> exit

8.最关键一步验证

1.root@solaris:~# ping google.com

2.google.com is alive