ORA-00245 错误解决
今天在客户这里碰到空上错，解决是参照下面这篇文章地做的：
今天看A类和B类的����斓娜照I�Y面都出�F了如下�e�`：
��c1日�I：
Tue Jul 31 03:02:50 2012
Errors in file/soft/Oracle/diag/rdbms/a1qzdb/a1qzdb1/trace/a1qzdb1_ora_5374100.trc:
ORA-00245: control file backup operation failed
Tue Jul 31 09:08:37 2012
Thread 1 advanced to log sequence 346 (LGWRswitch)
Current log# 1 seq# 346 mem# 0:+DATA/a1qzdb/onlinelog/group_1.259.786961989
Tue Jul 31 09:08:37 2012
LNS: Standby redo logfile selected forthread 1 sequence 346 for destination LOG_ARCHIVE_DEST_2
Tue Jul 31 09:08:40 2012
Archived Log entry 1132 added for thread 1sequence 345 ID 0x1f7e84e dest 1:
Tue Jul 31 09:27:34 2012
Control file backup creation failed.
Backup target file size found to be zero.
Errors in file/soft/oracle/diag/rdbms/a1qzdb/a1qzdb1/trace/a1qzdb1_arc2_15073292.trc:
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
��c2日�I：
Tue Jul 31 03:02:50 2012
Control file backup creation failed.
Backup target file size found to be zero.
Errors in file/soft/oracle/diag/rdbms/a1qzdb/a1qzdb2/trace/a1qzdb2_ckpt_7602620.trc:
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No suchfile or directory
Additional information: 3
Tue Jul 31 09:16:27 2012
Thread 2 advanced to log sequence 284 (LGWRswitch)
Current log# 6 seq# 284 mem# 0:+DATA/a1qzdb/onlinelog/group_6.275.786964219
Tue Jul 31 09:16:27 2012
LNS: Standby redo logfile selected forthread 2 sequence 284 for destination LOG_ARCHIVE_DEST_2
Tue Jul 31 09:16:30 2012
Archived Log entry 1134 added for thread 2sequence 283 ID 0x1f7e84e dest 1:
Tue Jul 31 09:27:29 2012
Expanded controlfile section 19 from 818 to1636 records
Requested to grow by 818 records; added 2blocks of records
Tue Jul 31 09:27:34 2012
Errors in file/soft/oracle/diag/rdbms/a1qzdb/a1qzdb2/trace/a1qzdb2_ora_15204484.trc:
ORA-00245: control file backup operation failed
相��的trace日�I：
/soft/oracle/diag/rdbms/a1qzdb/a1qzdb1/trace/a1qzdb1_ora_5374100.trc:
*** 2012-07-31 03:02:50.674
*** SESSION ID:(541.7217) 2012-07-3103:02:50.675
*** CLIENT ID:() 2012-07-31 03:02:50.675
*** SERVICE NAME:(SYS$USERS) 2012-07-3103:02:50.675
*** MODULE NAME:(rman@qza1db1 (TNS V1-V3))2012-07-31 03:02:50.675
*** ACTION NAME:(0000011 STARTED114)2012-07-31 03:02:50.675
/soft/oracle/diag/rdbms/a1qzdb/a1qzdb1/trace/a1qzdb1_arc2_15073292.trc:
ORA-00245: control file backup operationfailed
*** 2012-07-31 09:27:34.107
IBM AIX RISC System/6000 Error: 2: No suchfile or directory
Additional information: 3
/soft/oracle/diag/rdbms/a1qzdb/a1qzdb2/trace/a1qzdb2_ckpt_7602620.trc:
*** 2012-07-31 09:27:34.382
*** SESSION ID:(885.58917) 2012-07-3109:27:34.383
*** CLIENT ID:() 2012-07-31 09:27:34.383
*** SERVICE NAME:(SYS$USERS) 2012-07-3109:27:34.383
*** MODULE NAME:(rman@qza1db2 (TNS V1-V3))2012-07-31 09:27:34.383
*** ACTION NAME:(0000021 STARTED114)2012-07-31 09:27:34.383
ORA-00245: control file backup operationfailed
/soft/oracle/diag/rdbms/a1qzdb/a1qzdb2/trace/a1qzdb2_ora_15204484.trc:
*** 2012-07-31 03:02:50.508
IBM AIX RISC System/6000 Error: 2: No suchfile or directory
Additional information: 3
Google了一下，�l�F�@是Oracle11.2.0.2.0以後的一��“特性”：
从oracle 11.2.0.2.0开始，控制文件的快照文件必须能够被所有节点的数据实例访问到，并且必须放在共享的位置。否则，使用RMAN进行备份控制文件的时候会报如下错误：
ORA-00245: control file backup operationfailed。
当使用备份脚本备份的时候，这个错误可能会导致备份工作中断。
METALINK 中的两篇文档：
RAC BACKUP FAILS WITH ORA-00245: CONTROLFILE BACKUP OPERATION FAILED [ID1268725.1]【�@篇文字�]找到】
RMAN Snapshot Controlfile Must Reside onShared Device for RAC database in 11G [ID 1263621.1]【�@篇文字�]找到】
解释并解决了此问题！摘要如下：
"RMAN creates a copy of the controlfile for read consistency, this is the snapshot controlfile. Due to the changesmade to the controlfile backup mechanism in 11gR2 any instances in the clustermay write to the snapshot controlfile. Therefore, the snapshot controlfile fileneeds to be visible to all instances.
The same happens when a backup of thecontrolfile is created directly from sqlplus any instance in the cluster maywrite to the backup controfile file.
In 11gR2 onwards, the controlfile backuphappens without holding the control file enqueue. For non-RAC database, thisdoesn't change anything.
But, for RAC database, the snapshotcontrolfile location must be in a shared file system that will be accessible fromall the nodes."
当前的控制文件配置：
RMAN> show all;
using target database control file insteadof recovery catalog
RMAN configuration parameters for databasewith db_unique_name OSDB are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;# default
CONFIGURE BACKUP OPTIMIZATION OFF; #default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; #default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; #default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FORDEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICETYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FORDEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; #default
CONFIGURE ENCRYPTION FOR DATABASE OFF; #default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; #default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' ASOF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TONONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO'/soft/product/11.2.0.2/dbh/dbs/snapcf_osdb1.f'; # default
由於我��使用的是ASM，所以可以使用如下配置解决此问题，也可以把ASM替�Q成共享目�：
RMAN> CONFIGURE SNAPSHOT CONTROLFILE NAME TO'+SFRA/sncforcl_osdb.ora';
new RMAN configuration parameters:
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+SFRA/sncforcl_osdb.ora';
new RMAN configuration parameters aresuccessfully stored
RMAN> show all;
RMAN configuration parameters for databasewith db_unique_name OSDB are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;# default
CONFIGURE BACKUP OPTIMIZATION OFF; #default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; #default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; #default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FORDEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICETYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FORDEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; #default
CONFIGURE ENCRYPTION FOR DATABASE OFF; #default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; #default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' ASOF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TONONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+SFRA/sncforcl_osdb.ora';