CCNA实验八：IPv6 路由
实验拓扑：
屏幕剪辑的捕获时间: 2013/5/8 星期三 22:54
一、RIPng
R1路由器配置
R1(config)#ipv6 unicast-routing
R1(config)#ipv6 router rip ccna
R1(config-rtr)#
R1(config-rtr)#int s0/0
R1(config-if)#ipv add 2001:12:1:1::1/64
R1(config-if)#ipv6 rip ccna enable
R1(config-if)#no shut
R1(config-if)#
*Mar 1 00:09:05.627: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
R1(config-if)#
*Mar 1 00:09:06.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
R1(config-if)#
R1(config)#int f1/0
R1(config-if)#ipv6 add 2001:DB8:1:1::1/64
R1(config-if)#ipv6 rip ccna enable
R1(config-if)#no shut
R1(config-if)#
*Mar 1 00:11:41.087: %LINK-3-UPDOWN: Interface FastEthernet1/0, changed state to up
*Mar 1 00:11:42.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
R1(config-if)#
R2路由器配置
R2(config-rtr)#int s0/0
R2(config-if)#int s0/1
R2(config-if)#ipv6 add 2001:12:1:1::2/64
R2(config-if)#ipv6 rip ccna enable
R2(config-if)#no shut
R2(config-if)#
*Mar 1 00:26:27.227: %LINK-3-UPDOWN: Interface Serial0/1, changed state to up
R2(config-if)#
*Mar 1 00:26:28.239: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1, changed state to up
R2(config-if)#int s0/0
R2(config-if)#ipv6 add 2001:23:2:2::1/64
R2(config-if)#ipv6 rip ccna enable
R2(config-if)#no shut
R2(config-if)#
*Mar 1 00:27:46.399: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
R2(config-if)#
*Mar 1 00:27:47.411: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
R2(config-if)#
R3路由器配置
R3(config)#ipv6 unicast-routing
R3(config)#ipv6 router rip ccnp
R3(config-rtr)#int s0/0
R3(config-if)#ipv6 add 2001:23:2:2::2/64
R3(config-if)#ipv6 rip ccnp enable
R3(config-if)#no shut
R3(config-if)#int f1
*Mar 1 00:02:12.443: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
R3(config-if)#int f1/0
*Mar 1 00:02:13.455: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
R3(config-if)#int f1/0
R3(config-if)#ipv6 add
*Mar 1 00:02:36.243: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down
R3(config-if)#ipv6 add 2001:DB8:2:2::1/64
R3(config-if)#ipv6 rip ccnp enable
R3(config-if)#no shut
R3(config-if)#
*Mar 1 00:03:01.819: %LINK-3-UPDOWN: Interface FastEthernet1/0, changed state to up
*Mar 1 00:03:02.819: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
R3(config-if)#
PC设置
测试成功