华为5300交换机链路捆绑

华为5328端口聚合/负载eth-trunk

2011-04-24 16:48:28|  分类:H3C,HUAWEI|  标签:eth-trunk1|字号为端口默认是有配置的在配置eth-trunk前,先删掉默认配置:

[Quidway]int g0/0/8
[Quidway-GigabitEthernet0/0/8]dis this
#
interface GigabitEthernet0/0/8
port default vlan 1
bpdu enable
ntdp enable
ndp enable
#
使用一下命令:
[Quidway-GigabitEthernet0/0/8]undo port default vlan
[Quidway-GigabitEthernet0/0/8]bpdu disable
[Quidway-GigabitEthernet0/0/8]undo ntdp enable
[Quidway-GigabitEthernet0/0/8]undo ndp enable
配置命令:
[Quidway]int Eth-Trunk 1
[Quidway-Eth-Trunk1]
[Quidway-Eth-Trunk1]quit
[Quidway]int g0/0/8
[Quidway-GigabitEthernet0/0/8]et  
[Quidway-GigabitEthernet0/0/8]eth-trunk 1
[Quidway-GigabitEthernet0/0/8]dis eth-trunk 1
Eth-Trunk1's state information is:
WorkingMode: NORMAL          Hash arithmetic: According to MAC                
Least Active-linknumber: 1  Max Bandwidth-affected-linknumber: 8              
Operate status: down        Number Of Up Port In Trunk: 0                    
--------------------------------------------------------------------------------
PortName                Status      Weight
GigabitEthernet0/0/8    Down        1      
加其他端口一样


你可能感兴趣的:(标签,华为,交换机,链路捆绑,Eth-Trunk)