配置WMF3.0中的WinRM

关于修改WinRM的配置，建议将WMF升级到3.0版本以上；（关于WFM3.0的系统需求请参考http://281816327.blog.51cto.com/907015/1394798）

可以参照下面这个修改WinRM兼容性实例的步骤作为模版来配置WinRM.

关闭WinRM新旧版本兼容性事例：

（1）在powershell中输入“ls wsman:\localhost\service”,可查看有哪些属性可以修改;    

（2）我们先查看WFM3.0中WinRM默认的兼容性：

（3）输入“set-item wsman:\localhost\serivce\enablecompatibilityhttplistener false”；

（4）修改结果如下：

官方的文档如下：（但是我测试通不过）

Configuring WinRM

The following commands can be used to configure WinRM from the PowerShell command prompt.

• To enumerate the existing WinRM listeners:
  
  winrm enumerate winrm/config/listener
  
  

• To enable the "compatibility" HTTP listener on port 80:
  
  winrm set winrm/config/service @{EnableCompatibilityHttpListener="true"}
  
  

• To enable the "compatibility" HTTPS listener on port 443:
  
  winrm set winrm/config/service @{EnableCompatibilityHttpsListener="true"}
  
  

• To disable the "compatibility" HTTP listener on port 80:
  
  winrm set winrm/config/service @{EnableCompatibilityHttpListener="false"}
  
  

• To disable the "compatibility" HTTPS listener on port 443:
  
  winrm set winrm/config/service @{EnableCompatibilityHttpsListener="false"}
  
  

The following Group Policy settings can be used to enable/disable the "compatibility" listeners:

• Windows Components > Windows Remote Management (WinRM) > WinRM Service > Turn On Compatibility HTTP Listener
  
  

• Windows Components > Windows Remote Management (WinRM) > WinRM Service > Turn On Compatibility HTTPS Listener