原文地址：
http://hi.baidu.com/chenshake/item/40a9b591343ef31e924f41c9
当你需要在10台服务器干同样的工作，你肯定就会有这个想法。
今天学习半天，觉得使用pssh来管理多台服务器。不过目前就只能在linux下用，好像没有windows的工具
用途
pssh 在多个主机上并行地运行命令。
pscp 把文件并行地复制到多个主机上。
prsync 通过 rsync 协议把文件高效地并行复制到多个主机上。
pslurp 把文件并行地从多个远程主机复制到中心主机上。
pnuke 并行地在多个远程主机上杀死进程。
1：安装
wget http://parallel-ssh.googlecode.com/files/pssh-2.2.2.tar.gz
tar zxvf pssh-2.2.2.tar.gz
cd pssh-2.2.2
python setup.py install
2.配置密钥，免密码访问管理机器
在使用之前需要配置密钥访问，如下:
#ssh-keygen #一直回车
#复制公钥到远端服务器
#ssh-copy-id -i .ssh/id_rsa.pub [email protected]
ps.如果端口不是默认22 ，需要使用：ssh-copy-id -i .ssh/id_rsa.pub ”-p 4567 [email protected]”
3：运行第一条命令，查看启动时间
]# pssh -h servers.txt -l root -P uptime
173.16.0.102: 13:14:57 up 1 day, 2:00, 1 user, load average: 0.00, 0.00, 0.00
173.16.0.100: 13:23:34 up 21:40, 1 user, load average: 0.00, 0.00, 0.00
[1] 13:13:52 [SUCCESS] 173.16.0.102
[2] 13:13:52 [SUCCESS] 173.16.0.100
4：删除文件
我需要删除以前yum.repo 文件
pssh -h servers.txt -P "rm -r /etc/yum.repos.d/*.repo"
5：传输单个文件
pscp -h servers.txt /etc/yum.repos.d/ftp.repo /etc/yum.repos.d/
6：运行yum update
]# pssh -h servers.txt -l root -P "yum update"
173.16.0.100: Loaded plugins: fastestmirror
173.16.0.102: Loaded plugins: fastestmirror
173.16.0.100: Loading mirror speeds from cached hostfile
173.16.0.102: Loading mirror speeds from cached hostfile
173.16.0.100: Setting up Update Process
173.16.0.102: Setting up Update Process
173.16.0.100: No Packages marked for Update
173.16.0.102: No Packages marked for Update
[1] 13:38:13 [SUCCESS] 173.16.0.100
[2] 13:38:13 [SUCCESS] 173.16.0.102
7：让机器加载Ext4
]# pssh -h servers.txt -l root -P "modprobe ext4"
[1] 13:49:42 [SUCCESS] 173.16.0.100
[2] 13:49:42 [SUCCESS] 173.16.0.102
8：安装e4fsprogs, 支持ext4分区
[root@gluster02b ~]# pssh -h servers.txt -l root -P "yum -y install e4fsprogs"
173.16.0.102: Loaded plugins: fastestmirror
173.16.0.100: Loaded plugins: fastestmirror
173.16.0.100: Complete!
[1] 13:53:11 [SUCCESS] 173.16.0.100
173.16.0.102:
Installed:
e4fsprogs.x86_64 0:1.41.12-2.el5
173.16.0.102: Complete!
[2] 13:53:11 [SUCCESS] 173.16.0.102
9：创建一个目录
# pssh -h servers.txt -l root -P "mkdir /data01"
[1] 09:53:27 [SUCCESS] 173.16.0.100
[2] 09:53:27 [SUCCESS] 173.16.0.102
# pscp -h servers.txt /etc/fstab /etc/
[1] 09:53:51 [SUCCESS] 173.16.0.102
[2] 09:53:51 [SUCCESS] 173.16.0.100
10：复制文件夹到远程
# pscp -h servers.txt -r /root/tools/ /root/
[1] 10:23:27 [SUCCESS] 173.16.0.100
[2] 10:23:28 [SUCCESS] 173.16.0.102
11：关闭Selinux
# pssh -h servers.txt -l root -P "sed -i '/SELINUX=enforcing/s/SELINUX=enforcing/SELINUX=disabled/' /etc/sysconfig/selinux"
[1] 11:47:15 [SUCCESS] 173.16.0.100
[2] 11:47:15 [SUCCESS] 173.16.0.102
# pssh -h servers.txt -l root -P init 6
[1] 11:47:28 [SUCCESS] 173.16.0.102
[2] 11:47:28 [SUCCESS] 173.16.0.100
# pssh -h servers.txt -l root -P sestatus
[1] 11:49:37 [FAILURE] 173.16.0.100 Exited with error code 255
[2] 11:49:37 [FAILURE] 173.16.0.102 Exited with error code 255
# pssh -h servers.txt -l root -P sestatus
173.16.0.100: SELinux status: disabled
[1] 11:52:32 [SUCCESS] 173.16.0.100
173.16.0.102: SELinux status: disabled
[2] 11:52:32 [SUCCESS] 173.16.0.102
http://sheriy.com/?p=748
http://www.theether.org/pssh/docs/0.2.3/pssh-HOWTO.html