c3p0详解

原文地址:http://www.blogjava.net/Alpha/archive/2009/03/29/262789.html

<c3p0-config>
<default-config>
<!--当连接池中的连接耗尽的时候c3p0一次同时获取的连接数。Default: 3 -->
<property name="acquireIncrement">3</property>

<!--定义在从数据库获取新连接失败后重复尝试的次数。Default: 30 -->
<property name="acquireRetryAttempts">30</property>

<!--两次连接中间隔时间,单位毫秒。Default: 1000 -->
<property name="acquireRetryDelay">1000</property>

<!--连接关闭时默认将所有未提交的操作回滚。Default: false -->
<property name="autoCommitOnClose">false</property>

<!--c3p0将建一张名为Test的空表,并使用其自带的查询语句进行测试。如果定义了这个参数那么
属性preferredTestQuery将被忽略。你不能在这张Test表上进行任何操作,它将只供c3p0测试
使用。Default: null-->
<property name="automaticTestTable">Test</property>

<!--获取连接失败将会引起所有等待连接池来获取连接的线程抛出异常。但是数据源仍有效
保留,并在下次调用getConnection()的时候继续尝试获取连接。如果设为true,那么在尝试
获取连接失败后该数据源将申明已断开并永久关闭。Default: false-->
<property name="breakAfterAcquireFailure<wbr><wbr>"&gt;false&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--当连接池用完时客户端调用getConnection()后等待获取新连接的时间,超时后将抛出<br> SQLException,如设为0则无限期等待。单位毫秒。Default: 0 --&gt;<br></span>&lt;property name="checkoutTimeout"&gt;100&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--通过实现ConnectionTester或QueryConnectionTester的类来</span><span style="color:rgb(255,0,0)">测试连接。类名需制定全路径。<br> Default: com.mchange.v2.c3p0.impl.DefaultConnectionTester--&gt;<br></span>&lt;property name="connectionTesterClassNam<wbr><wbr>e"&gt;&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--指定c3p0 libraries的路径,如果(通常都是这样)在本地即可获得那么无需设置,默认null即可<br> Default: null--&gt;<br></span>&lt;property name="factoryClassLocation"&gt;null&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--Strongly disrecommended. Setting this to true may lead to subtle and bizarre bugs.<br> (文档原文)作者强烈建议不使用的一个属性--&gt;<br></span>&lt;property name="forceIgnoreUnresolvedTra<wbr><wbr>nsactions"&gt;false&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--每60秒检查所有连接池中的空闲连接。Default: 0 --&gt;<br></span>&lt;property name="idleConnectionTestPeriod<wbr><wbr>"&gt;60&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--初始化时获取三个连接,取值应在minPoolSize与maxPoolSize之间。Default: 3 --&gt;<br></span>&lt;property name="initialPoolSize"&gt;3&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--最大空闲时间,60秒内未使用则连接被丢弃。若为0则永不丢弃。Default: 0 --&gt;<br></span>&lt;property name="maxIdleTime"&gt;60&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--连接池中保留的最大连接数。Default: 15 --&gt;<br></span>&lt;property name="maxPoolSize"&gt;15&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--JDBC的标准参数,用以控制数据源内加载的PreparedStatements数量。但由于预缓存的statements<br> 属于单个connection而不是整个连接池。所以设置这个参数需要考虑到多方面的因素。<br> 如果maxStatements与maxStatementsPerConnecti<wbr><wbr>on均为0,则缓存被关闭。Default: 0--&gt;<br></wbr></wbr></span>&lt;property name="maxStatements"&gt;100&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--maxStatementsPerConnecti<wbr>on定义了连接池内单个连接所拥有的最大缓存statements数。Default: 0 --&gt;<br></wbr></span>&lt;property name="maxStatementsPerConnecti<wbr><wbr>on"&gt;&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--c3p0是异步操作的,缓慢的JDBC操作通过帮助进程完成。扩展这些操作可以有效的提升性能<br> 通过多线程实现多个操作同时被执行。Default: 3--&gt;</span><br> &lt;property name="numHelperThreads"&gt;3&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--当用户调用getConnection()时使root用户成为去获取连接的用户。主要用于连接池连接非c3p0<br> 的数据源时。Default: null--&gt;<br></span>&lt;property name="overrideDefaultUser"&gt;root&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--与overrideDefaultUser参数对应使用的一个参数。Default: null--&gt;<br></span>&lt;property name="overrideDefaultPassword"&gt;password&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--密码。Default: null--&gt;<br></span>&lt;property name="password"&gt;&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--定义所有连接测试都执行的测试语句。在使用连接测试的情况下这个一显著提高测试速度。注意:<br> 测试的表必须在初始数据源的时候就存在。Default: null--&gt;</span><br> &lt;property name="preferredTestQuery"&gt;select id from test where id=1&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--用户修改系统配置参数执行前最多等待300秒。Default: 300 --&gt;<br></span>&lt;property name="propertyCycle"&gt;300&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--因性能消耗大请只在需要的时候使用它。如果设为true那么在每个connection提交的<br> 时候都将校验其有效性。建议使用idleConnectionTestPeriod<wbr><wbr>或automaticTestTable<br> 等方法来提升连接测试的性能。Default: false --&gt;<br></wbr></wbr></span>&lt;property name="testConnectionOnCheckout<wbr><wbr>"&gt;false&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--如果设为true那么在取得连接的同时将校验连接的有效性。Default: false --&gt;<br></span>&lt;property name="testConnectionOnCheckin"&gt;true&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--用户名。Default: null--&gt;<br></span>&lt;property name="user"&gt;root&lt;/property&gt;<br><br><span style="color:rgb(255,0,0)">&lt;!--早期的c3p0版本对JDBC接口采用动态反射代理。在早期版本用途广泛的情况下这个参数<br> 允许用户恢复到动态反射代理以解决不稳定的故障。最新的非反射代理更快并且已经开始<br> 广泛的被使用,所以这个参数未必有用。现在原先的动态反射与新的非反射代理同时受到<br> 支持,但今后可能的版本可能不支持动态反射代理。Default: false--&gt;<br></span>&lt;property name="usesTraditionalReflectiv<wbr><wbr>eProxies"&gt;false&lt;/property&gt;<br><br> &lt;property name="automaticTestTable"&gt;con_test&lt;/property&gt;<br> &lt;property name="checkoutTimeout"&gt;30000&lt;/property&gt;<br> &lt;property name="idleConnectionTestPeriod<wbr><wbr>"&gt;30&lt;/property&gt;<br> &lt;property name="initialPoolSize"&gt;10&lt;/property&gt;<br> &lt;property name="maxIdleTime"&gt;30&lt;/property&gt;<br> &lt;property name="maxPoolSize"&gt;25&lt;/property&gt;<br> &lt;property name="minPoolSize"&gt;10&lt;/property&gt;<br> &lt;property name="maxStatements"&gt;0&lt;/property&gt;<br> &lt;user-overrides user="swaldman"&gt;<br> &lt;/user-overrides&gt;<br> &lt;/default-config&gt;<br> &lt;named-config name="dumbTestConfig"&gt;<br> &lt;property name="maxStatements"&gt;200&lt;/property&gt;<br> &lt;user-overrides user="poop"&gt;<br> &lt;property name="maxStatements"&gt;300&lt;/property&gt;<br> &lt;/user-overrides&gt;<br> &lt;/named-config&gt;<br> &lt;/c3p0-config&gt;<br><br><br> 转:<a target="_blank" href="http://www.wujianrong.com/archives/2007/08/c3p0.html" style="color:rgb(26,139,200); text-decoration:none"><span style="color:rgb(140,89,0)">http://www.wujianrong.com/archives/2007/08/c3p0.html</span></a></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>
解决MYSQL 8小时问题

最近的一个项目在Hibernate使用C3P0的连接池,数据库为Mysql。开发测试没有问题,在运行中每个一段长的空闲时间就出现异常:

java 代码
  1. org.hibernate.exception.JDBCConnectionException: could not execute query
  2. at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:74)
  3. at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
  4. .......
  5. Caused by: com.mysql.jdbc.exceptions.MySQLNonTransientConnect<wbr><wbr>ionException: No operations allowed after connection closed.Connection was implicitly closed due to underlying exception/error:</wbr></wbr>
  6. ** BEGIN NESTED EXCEPTION **
  7. com.mysql.jdbc.CommunicationsException
  8. MESSAGE: Communications link failure due to underlying exception:
  9. ** BEGIN NESTED EXCEPTION **
  10. java.net.SocketException
  11. MESSAGE: Broken pipe
  12. STACKTRACE:
  13. java.net.SocketException: Broken pipe
  14. at java.net.SocketOutputStream.socketWrite0(Native Method)
  15. ......
  16. ** END NESTED EXCEPTION **

查看了Mysql的文档,以及Connector/J的文档以及在线说明发现,出现这种异常的原因是:

Mysql服务器默认的“wait_timeout”是8小时,也就是说一个connection空闲超过8个小时,Mysql将自动断开该 connection。这就是问题的所在,在C3P0 pools中的connections如果空闲超过8小时,Mysql将其断开,而C3P0并不知道该connection已经失效,如果这时有 Client请求connection,C3P0将该失效的Connection提供给Client,将会造成上面的异常。

解决的方法有3种:

  1. 增加wait_timeout的时间。
  2. 减少Connection pools中connection的lifetime。
  3. 测试Connection pools中connection的有效性。

当然最好的办法是同时综合使用上述3种方法,下面就DBCP和C3P0分别做一说明,假设wait_timeout为默认的8小时

DBCP增加以下配置信息:

  1. //set to 'SELECT 1'
  2. validationQuery ="SELECT 1"
  3. //set to 'true'
  4. testWhileIdle ="true"
  5. //some positive integer
  6. timeBetweenEvictionRunsMillis =3600000
  7. //set to something smaller than 'wait_timeout'
  8. minEvictableIdleTimeMillis =18000000
  9. //if you don't mind a hit for every getConnection(), set to "true"
  10. testOnBorrow ="true"

C3P0增加以下配置信息:

  1. //获取connnection时测试是否有效
  2. testConnectionOnCheckin = true
  3. //自动测试的table名称
  4. automaticTestTable=C3P0TestTable
  5. //set to something much less than wait_timeout, prevents connections from going stale
  6. idleConnectionTestPeriod =18000
  7. //set to something slightly less than wait_timeout, preventing 'stale' connections from being handed out
  8. maxIdleTime =25000
  9. //if you can take the performance 'hit', set to "true"
  10. testConnectionOnCheckout =true

更多的配置信息大家可以查看C3P0文档,Connector/J文档,以及DBCP的文档。

转:http://www.javaeye.com/article/38506

我自己的配置:

jdbc.driverClass=com.mysql.jdbc.Driver
jdbc.jdbcUrl = jdbc:mysql://localhost:3306/test
jdbc.user = root
jdbc.password = 12345
jdbc.miniPoolSize = 1
jdbc.maxPoolSize = 20
jdbc.initialPoolSize = 1
jdbc.maxIdleTime = 25000
jdbc.acquireIncrement = 1

jdbc.acquireRetryAttempts = 30
jdbc.acquireRetryDelay = 1000
jdbc.testConnectionOnCheckin = true
jdbc.automaticTestTable = c3p0TestTable
jdbc.idleConnectionTestPeriod<wbr><wbr>= 18000<br> jdbc.checkoutTimeout=3000</wbr></wbr>

<bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource" destroy-method="close">
<wbr><wbr><wbr><wbr>&lt;property name="driverClass" value="${jdbc.driverClass}" /&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="jdbcUrl" value="${jdbc.jdbcUrl}" /&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="user" value="${jdbc.user}" /&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="password" value="${jdbc.password}" /&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="minPoolSize" value="${jdbc.miniPoolSize}" /&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="maxPoolSize" value="${jdbc.maxPoolSize}"/&gt;<wbr><wbr><wbr><wbr><br><wbr><wbr><wbr><wbr>&lt;property name="initialPoolSize" value="${jdbc.initialPoolSize}"/&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="maxIdleTime" value="${jdbc.maxIdleTime}"/&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="acquireIncrement" value="${jdbc.acquireIncrement}"/&gt;<br><wbr><wbr><wbr><wbr><br><wbr><wbr><wbr><wbr>&lt;property name="acquireRetryAttempts" value="${jdbc.acquireRetryAttempts}"/&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="acquireRetryDelay" value="${jdbc.acquireRetryDelay}"/&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="testConnectionOnCheckin" value="${jdbc.testConnectionOnCheckin}"/&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="automaticTestTable" value="${jdbc.automaticTestTable}"/&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="idleConnectionTestPeriod<wbr><wbr>" value="${jdbc.idleConnectionTestPeriod<wbr><wbr>}"/&gt;<br><wbr><wbr><wbr><wbr>&lt;property name="checkoutTimeout" value="${jdbc.checkoutTimeout}"/&gt;</wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr>

</bean>

你可能感兴趣的:(c3p0)