DRBD安装配置文档

系统：DVD最小化安装centos6.4系统
(centos5 yum 安装 需要开启extras源)
主机：
Ⅰ.HOSTNAME：vm01-centos ip：192.168.0.55
Ⅱ.HOSTNAME：vm02-centos ip：192.168.0.82
drbd版本：drbd-8.4.3
原理

             +------------+
             | 文件系统 |
             +------------+
                      |
                     V
            +----------------+
            |   块设备层    |
            | (/dev/drbd0) |
            +----------------+
                |               |
                |               |
               V              V
+---------------+ +-------------------+
|  本地硬盘    |  |远程主机硬盘  |
|(/dev/xvdb5)|  |  (/dev/xvdb5)  |
+---------------+ +-------------------+

step.1.安装
依赖环境

yum install glib2-devel libtool-ltdl-devel net-snmp-devel bzip2-devel \ ncurses-devel openssl-devel libtool libxml2-devel gettext bison flex zlib-devel \ mailx which libxslt-devel docbook-dtds docbook-style-xsl PyXML shadow-utils opensp \autoconf automake make cmake libuuid-devel libxslt libxslt-devel libgcrypt-devel pkgconfig \ libgpg-error-devel sgml-common opensp openjade xml-common docbook-dtds flex rpm-build \ kernel-devel gcc xfsprogs xfsdump -y

mkdir -p /root/rpmbuild/SOURCES

关闭iptables,selinux

service iptables stop  chkconfig iptables off setenforce 0 sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config

编译安装

tar zxvf drbd-8.4.3.tar.gzcd drbd-8.4.3 ./configure --with-utils  --with-udev --with-xen --with-heartbeat --with-pacemaker --with-rgmanager --with-bashcompletionmake rpm  make km-rpmcd /root/rpmbuild/RPMS/x86_64  rpm -ivh drbd-*.rpm

step.2.配置

vi /etc/drbd.d/global_common.conf

global {         usage-count yes;}common {         handlers {                 pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";                 pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";                 local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ; halt -f";        }          startup {                 wfc-timeout 30;                 degr-wfc-timeout 30;                 outdated-wfc-timeout 30;                # wait-after-sb         }          options {                 # cpu-mask on-no-data-accessible         }          disk {                 on-io-error detach;                 fencing resource-and-stonith;                 resync-rate 15M;        }          net {                 protocol C;                 cram-hmac-alg sha1;                 shared-secret "YOEKEY-_-";        }}

vi /etc/drbd.d/vm00-centos.res

resource vm00-centos {device /dev/drbd0; disk /dev/vg_drbd01/lv_drbd01; meta-disk internal; on vm01-centos {address 192.168.0.55:9876;}on vm02-centos {address 192.168.0.82:9876;}}

主从服务器创建相同大小的lvm

fdisk -l /dev/xvdb     Device Boot      Start         End      Blocks   Id  System/dev/xvdb1               1         652     5237158+   5  Extended/dev/xvdb5               1         652     5237127   8e  Linux LVM pvcreate /dev/xvdb5 vgcreate vg_drbd01 /dev/xvdb5 vgchange -a y vg_drbd01 vgdisplay vg_drbd01 |grep "Total PE"   Total PE              1278lvcreate -l 1278 -n lv_drbd01 vg_drbd01 modprobe drbd drbdadm create-md vm00-centos drbdadm up vm00-centos

两个服务器执行上面相同操作
========================
选择主服务器

drbdadm primary vm00-centos#提升为主服务器成功后drbd-overview  0:vm00-centos/0  Connected Primary/Secondary UpToDate/UpToDate C r----- /DATA xfs 5.0G 33M 5.0G 1%mkfs.xfs /dev/drbd0mkdir /DATAmount /dev/drbd0 /DATA/df -hFilesystem            Size  Used Avail Use% Mounted on/dev/mapper/VolGroup00-LogVol00                       8.7G  1.2G  7.1G  15% /tmpfs                 497M     0  497M   0% /dev/shm/dev/xvda1            194M   27M  158M  15% /boot/dev/drbd0            5.0G   33M  5.0G   1% /DATA

切换主从服务器
1.主服务器降级

umount /DATA/drbdadm secondary vm00-centos

2.从服务器升级

drbdadm primary vm00-centos 
mkdir /DATAmount /dev/drbd0 /DATA/