OPENWRT下第三方驱动的加载

本人路由为华硕500GPV1 拆掉了原来的无线模块，然后换上了一个300M的新模块（型号为Atheros ar9160 ）,然后刷上了OPENWRT,进入系统之后发现无线网卡没有被驱动,随之找到了该无线模块的驱动,一下是安装改无线模块驱动的依赖性顺序，

opkg install http://downloads.openwrt.org/snapshots/trunk/brcm47xx/packages/kmod-ath_3.0.3+2011-09-14-1_brcm47xx.ipk
opkg install http://downloads.openwrt.org/snapshots/trunk/brcm47xx/packages/kmod-ath9k-common_3.0.3+2011-09-14-1_brcm47xx.ipk
opkg install http://downloads.openwrt.org/snapshots/trunk/brcm47xx/packages/kmod-ath9k_3.0.3+2011-09-14-1_brcm47xx.ipk
重启之后,无线模块被正常识别到。