思科、华为、H3C主要命令对照表（二）交换部分

思科	华为	H3C	描述
交换部份：
enable password	set authentication password simple	set authentication password simple	配置明文密码
interface type/number	port type/number	port type/number	进入接口
interface vlan 1	interface vlan 1	interface vlan 1	进入vlan配置vlan管理地址
interface rang	interface ethID to ID	interface ethID to ID	定议多个端口的组
enabl esecret	super password	super password	设置特权口令
duplex (half|full|auto)	duplex (half|full|auto)	duplex (half|full|auto)	配置接口状态
speed (10/100/1000)	speed (10/100/1000)	speed (10/100/1000)	配置端口速率
switchport mode trunk	port link-type trunk	port link-type trunk	配置trunk
vlan ID  /no vlan ID	vlan ID  /undo vlan ID	vlan ID  /undo vlan ID	添加、删除vlan
switchport access vlan ID	port vlan ID	port vlan ID	将端口接入vlan
show interface	display interface	display interface	查看接口
show vlan ID	display vlan ID	display vlan ID	查看vlan
encapsulation	link-protocol	link-protocol	封装协议
channel-group 1 mode on	port link-aggregation group 1	port link-aggregation group 1	链路聚合
ip routing	默认开启	默认开启	开启三层交换的路由功能
no switchport	不支持	不支持	开启接口三层功能
vtp domain	GVRP	GVRP	对跨以太网交换机的VLAN进行动态注册和删除
spanning-tree vlan ID root primary			stp 配置根网桥
spanning-tree vlan ID priority			配置网桥优先级
show spanning-tree			查看STP配置