ORA-00059: maximum number of DB_FILES exceeded

今天添加数据文件，结果报错，ORA-00059: maximum number of

DB_FILES exceeded 。

---------------

Cause: An unavailable resource was requested.
The maximum number of datafiles is specified by the DB_FILES

parameter in the initialization parameter file.
When this maximum is reached, no more requests are processed.

Action: Try again when the resource is freed.
If this message occurs often, Oracle must be shut down and

restarted after increasing the DB_FILES parameter in the

initialization parameter file.
If the DB_FILES parameter cannot be changed because it is

already set to the MAXDATAFILES parameter value, set at

database creation, you must create a new control file.
------------------

数据库参数显示，db_files 设置为 200， 而 select count(*) from

v$datafile; 之后得到的数据也是 200 ， 说明已经达到了设置的最大值

。

SQL> show parameter db_files

NAME TYPE VALUE
------------------------------------ -----------

------------------------------
db_files integer 200
SQL>

不过通过 SQL> alter database backup controlfile to trace ;

在udump下面找到控制文件文本，查看发现 MAXDATAFILES 1024 ， 如下面

：

# be invalidated. Use this only if online logs are damaged.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
MAXINSTANCES 32
MAXLOGHISTORY 3857
LOGFILE
GROUP 1 (
'/ocfs_ctrl_redo/orcl/redo01.log',
'/ocfs_data/orcl/redo01b.log'
) SIZE 100M,

由于db_files 参数值 200没有超过 maxdatafiles 1024 的大小，所以可

以通过直接加大参数db_files 值来防止此错误出现，以便正确加入数据文

件。 但是如果 db_files 已经设置和maxdatafiles 一样大小了，

报错ORA-00059, 那么就只有修改控制文件中的值了，需要重新生成控制文

件。使用 alter database backup controlfile to trace ,

到你的udump 目录下找到这个刚刚生成的trc文件，去掉其中的解释部分，

保留Create controlfile 部分，编辑此文件，增加MAXDATAFILES 的值，

然后关闭数据库shutdown immediate , 全备份一次数据库， 将现有的控

制文件备份到其他地方， 然后从控制文件目录删除，假设将编辑好的trc文

件命名为 recreate_control.sql ; 那么我们现在可以执行重新建立控制

文件了。 注意修改的trc 文件开头都会有 STARTUP NOMOUNT 。

SQL> @recreate_control.sql

SQL> alter database open noresetlogs;

如果你收到了 Statement processed 的反馈信息，那么生效 。

=================================

Metalink 上的建议解决方法：

==================================

Cause: An unavailable resource was requested.
The maximum number of datafiles is specified by the DB_FILES

parameter in the initialization parameter file.
When this maximum is reached, no more requests are processed.

Action: Try again when the resource is freed.
If this message occurs often, Oracle must be shut down and

restarted after increasing the DB_FILES parameter in the

initialization parameter file.
If the DB_FILES parameter cannot be changed because it is

already set to the MAXDATAFILES parameter value, set at

database creation, you must create a new control file.

RECREATING THE CONTROL FILE:

----------------------------

In Oracle7 or higher, you can create the control file. In

addition, you can get

Oracle to create the script for you. To do this, perform the

following steps:

1. With the database mounted or open, issue the following

commands:

SQL> alter database backup controlfile to trace;

SQL> exit

2. A trace file will have been generated in your

'user_dump_dest'.

User_dump_dest is an init.ora parameter, and can be found by

issuing:

SQL> show parameter user_dump_dest

The easiest way to locate the correct trace is to look at its

date. A

file will exist with the current date and time. The naming

convention

for these files is operating system specific.

3. Once the file is located, search through the file for the

word "CONTROL"

You should find:

# The following commands will create a new control file and

use it

# to open the database.

# No data other than log history will be lost. Additional logs

may ETC.ETC.

4. Copy this trace file to some location and rename it to end

it ".sql",

for this example, it is called "recr_con.sql".

5. Edit the "recr_con.sql" deleting the trace header

information. Then

increase the value that you find next to the word

"MAXDATAFILES".

6. Shutdown the database (NORMAL or IMMEDIATE, but not ABORT).

7. Take a full database backup at this time.

8. Remove the current control files. It is essential to remove

all control

files, otherwise, you will receive an error. In addition, you

CANNOT

REUSE the control file, since the size of the control file

will increase

when you increase MAXDATAFILES.

9. Create the controlfile within SQLDBA:

SQL> connect internal

SQL> @recr_con.sql

SQL> alter database open noresetlogs;

If you receive a "Statement processed" message, then your

database is

now back up and running with a higher datafile limit. It is

recommended

to shutdown at this time and take a full backup.

CREATE CONTROLFILE SYNTAX:

-------------------------
The following is information on the create control file

syntax, this information is fully documented in the Oracle SQL

Reference Manual. The syntax of this command is similar to

CREATE DATABASE. The defaults for any missing clauses are the

same as the DATABASE defaults for CREATE DATABASE.

CREATE CONTROLFILE [REUSE]

SET DATABASE name

[LOGFILE filespec [, filespec] ...]

RESETLOGS | NORESETLOGS

[MAXLOGFILES integer]

[DATAFILE filespec [, filespec] ...]

[MAXDATAFILES integer]

[MAXINSTANCES integer]

[ARCHIVELOG | NOARCHIVELOG]

[SHARED | EXCLUSIVE]

Parameters:

REUSE: If present the control files may already exist. The

new control files will overwrite the existing files. If

this option is missing, the new control files must not

yet exist. As in CREATE DATABASE, the names of the

control files are determined by the init.ora parameter

control_files.

DATABASE: Must match the database names in the data and log

files.

LOGFILE: This clause lists all the online logs that will be

used for this database. If not specified the port

dependant defaults will be assumed. The interpretation

of the filespecs depends on the next parameter.

RESETLOGS: If this flag is present the current contents of

the online logs are ignored. The new control files will

contain flags requiring ALTER DATABASE OPEN RESETLOGS,

which initializes the logs. Media recovery may be

applied as needed before the open. Note that either

RESETLOGS or NORESETLOGS must be specified. It is safest

to choose RESETLOGS and follow it with normal media

recovery.

NORESETLOGS: If specified, the log files must be the current

online logs. They must not be restored backups, and all

log files must be listed. Their headers are read to

construct the control file entries. They are used for

recovery. If archiving is enabled all the online logs

must be archived, even if they were already archived.

The SIZE option in the filespecs, if present, will be

used to validate the size of the file named.

MAXLOGFILES: Same as for CREATE DATABASE. May be different

than the value in the original control file, but it may

not be smaller the maximum number of log files the

database ever contained - including ones that have been

dropped. Set it greater than or equal to the value used

at CREATE DATABASE time.

DATAFILE: To ensure proper behavior, all datafiles for the

database must be listed. It is possible to omit a non

system tablespace file only if media recovery is enabled

and you will not be doing an open reset logs on the first

open after the create controlfile. If the omitted

file(s) contain(s) active rollback segments, the open

will most likely fail, in which case the missing

datafile(s) must be found, and the controlfile recreated.

All datafiles listed must be accessible since they are

assumed to be online. They MAY be backup copies needing

recovery. Their headers are read to construct the

control file records. The SIZE option in the filespecs,

if present, is used to validate the size of the file

named. The reuse option is ignored. The next database

open validates that all the files are specified and that

the sizes match.

MAXDATAFILES: Same as for CREATE DATABASE. May be different

than the value in the original control file, but it may

not be smaller the maximum number of data files the

database ever contained - including ones that have been

dropped.

MAXINSTANCES: Same as for CREATE DATABASE. May be different

than the value in the original control file.

[NO]ARCHIVELOG: Same as for CREATE DATABASE. May be different

than the value in the original control file.

If you wish to archive logs, it is recommended that the

ARCHIVELOG option be used with CREATE CONTROLFILE even

though the option can later be enabled with an

ALTER DATABASE command. NOARCHIVELOG is the default.

SHARED: Same as for CREATE DATABASE.

EXCLUSIVE: Same as for CREATE DATABASE.

EXAMPLE:

--------------------------------------------------------------

-

CREATE CONTROLFILE

SET DATABASE ORACLE

LOGFILE '/releases1/6036p/dbs/log2ORACLE.dbf '

'/releases1/6036p/dbs/log3ORACLE.dbf '

DATAFILE '/releases1/oracle/dbs/data_space.dbf',

'/releases1/6036p/dbs/usrORACLE.dbf'

MAXDATAFILES 121

NORESETLOGS;

 

本文来自CSDN博客，转载请标明出处： http://blog.csdn.net/recoveryfororacle/archive/2009/04/11/4062595.aspx