pass4sure Tip Test Tutorial

It is time you get the best most authentic preparation guide for the   HP0-786  1z0-147   Exam. pass4sure is an internationally acclaimed learning-centric  920-115  UM0-411  jn0-541  Exam preparation service which will help you achieve your educational and career goals.
there are some questions about exams.
1.Your x86-based system has a BIOS that does not support booting off of a CD-ROM, DVD-ROM, or network, and you want to install Solaris 10 OS on your system.

Which procedure must you use?

A: You use PXE with Custom JumpStart.
B: You must boot off of a Solaris 10 PXE diskette.
C: You must boot off of a Solaris 10 Device Configuration Assistant diskette.
D: You must boot off of the hard drive and install the software from your current OS.
Correct Answers:  C

2.A file system needs to be backed up without disrupting the service to the users. You  decide to create a snapshot of the file system in question, so that the file system does not have to be unmounted.

Which step should you take CCIA  before creating the snapshot?

A: remove all old snapshots
B: put the system in single-user mode
C: locate sufficient backing-store space
D: insert an empty tape in the tape drive
Correct Answers:  C

3.A system will not boot after modification to a critical file on the root file system on /dev/dsk/c0t0d0s0. The  MCSA system has been booted to the appropriate level to allow access to the disk where the root file system is located and to set the terminal type.

Which two commands should you run to make the file system available for edit? (Choose two.)

A:fsck /dev/rdsk/c0t0d0s0
B:mount /dev/dsk/c0t0d0s0 /
C:mount /dev/dsk/c0t0d0s0 /a
D:fsck /devices/rdsk/c0t0d0s0
Correct Answers:  A, C

4.There are four printers installed and 190-534  1T6-530 configured on your print server. The printers are named according to their performance: veryfast, fast, medium, and slow. You want to define a print class, printclass, that incorporates all four printers and sends most of the work to the veryfast and fast printers.

Which sequence of commands on the print server accomplishes this task?

A: lpadmin -p veryfast,fast,medium,slow -c printclass
B: lpsched -p veryfast,fast,medium,slow -c printclass
C: lpadmin -p slow -c printclass
lpadmin -p medium -c printclass
lpadmin -p fast -c printclass
lpadmin -p veryfast -c printclass
D: lpadmin -p veryfast -c printclass
lpadmin -p fast -c printclass
lpadmin -p medium -c printclass
lpadmin -p slow -c printclass
Correct Answers:  D