openstack运维实战系列(十六)之ceph存储安装
1.前言
企业上线openstack，必须要思考和解决三方面的难题:1.控制集群的高可用和负载均衡，保障集群没有单点故障，持续可用，2.网络的规划和neutron L3的高可用和负载均衡，3. 存储的高可用性和性能问题。存储openstack中的痛点与难点之一，在上线和运维中，值得考虑和规划的重要点，openstack支持各种存储，包括分布式的文件系统，常见的有:ceph,glusterfs和sheepdog，同时也支持商业的FC存储，如IBM,EMC,NetApp和huawei的专业存储设备，一方面能够满足企业的利旧和资源的统一管理。
2. ceph概述
ceph作为近年来呼声最高的统一存储，在云环境下适应而生，ceph成就了openstack和cloudstack这类的开源的平台方案，同时openstack的快速发展，也吸引了越来越多的人参与到ceph的研究中来，在过去的2015年中，ceph在整个社区的活跃度越来越高，越来越多的企业，使用ceph做为openstack的glance，nova，cinder的存储。
ceph是一种统一的分布式文件系统，能够支持三种常用的接口:1.对象存储接口，兼容于S3，用于存储结构化的数据，如图片，视频，音频等文件，其他对象存储有:S3,Swift,FastDFS等；2. 文件系统接口，通过cephfs来完成，能够实现类似于nfs的挂载文件系统，需要由MDS来完成，类似的文件系存储有:nfs,samba,glusterfs等；3. 块存储，通过rbd实现，专门用于存储云环境下块设备，如openstack的cinder卷存储，这也是目前ceph应用最广泛的地方。
ceph的体系结构：
3.ceph的安装
环境介绍，通过ceph-depoly的方式部署ceph，三台角色如下,按照需求配置好hostname并格式化磁盘为xfs并挂载
| ip | 主机名 | 角色 | 磁盘 |
| 10.1.2.230 | controller_10_1_2_230 | Monitor/admin-deploy | |
| 10.1.2.231 | network_10_1_2_231 | OSD | /data1/osd0,格式化为xfs |
| 10.1.2.232 | compute1_10_1_2_232 | OSD | /data1/osd1,格式化为xfs |
2.yum源的准备，需要配置好Epel源和ceph源
vim /etc/yum.repos.d/ceph.repo
[ceph-noarch]
name=Ceph noarch packages
baseurl=http://download.ceph.com/rpm-{ceph-release}/{distro}/noarch
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://download.ceph.com/keys/release.asc
[root@controller_10_1_2_230 ~]# yum repolist Loaded plugins: fastestmirror, priorities Repository epel is listed more than once in the configuration Repository epel-debuginfo is listed more than once in the configuration Repository epel-source is listed more than once in the configuration Determining fastest mirrors base | 3.7 kB 00:00 base/primary_db | 4.4 MB 00:01 ceph | 2.9 kB 00:00 ceph/primary_db | 24 kB 00:00 epel | 4.4 kB 00:00 epel/primary_db | 6.3 MB 00:00 extras | 3.3 kB 00:00 extras/primary_db | 19 kB 00:00 openstack-icehouse | 2.9 kB 00:00 openstack-icehouse/primary_db | 902 kB 00:00 updates | 3.4 kB 00:00 updates/primary_db | 5.3 MB 00:00 211 packages excluded due to repository priority protections repo id repo name status base CentOS-6 - Base 6,311+56 ceph ceph 21+1 epel Extra Packages for Enterprise Linux 6 - x86_64 11,112+36 extras CentOS-6 - Extras 15 openstack-icehouse OpenStack Icehouse Repository 1,353+309 updates CentOS-6 - Updates 1,397+118 repolist: 20,209
3.配置ntp，所有的机器均需要配置ntp服务器，统一同步到内网的ntp服务器，参考:
[root@compute1_10_1_2_232 ~]# vim /etc/ntp.conf server 10.1.2.230 [root@compute1_10_1_2_232 ~]# /etc/init.d/ntpd restart Shutting down ntpd: [ OK ] Starting ntpd: [ OK ] [root@compute1_10_1_2_232 ~]# chkconfig ntpd on [root@compute1_10_1_2_232 ~]# chkconfig --list ntpd ntpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
4.安装ceph，在所有的节点上都需要安装ceph，在admin节点，需要安装另外一个ceph-deploy，用于软件部署
[root@controller_10_1_2_230 ~]# yum install ceph ceph-deploy #管理节点 [root@network_10_1_2_231 ~]# yum install ceph -y #OSD节点 [root@compute1_10_1_2_232 ~]# yum install ceph -y #OSD节点
5.生成SSH key秘钥，并拷贝至远端
a、生成key [root@controller_10_1_2_230 ~]# ssh-keygen Generating public/private rsa key pair. Enter file in which to save the key (/root/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /root/.ssh/id_rsa. Your public key has been saved in /root/.ssh/id_rsa.pub. The key fingerprint is: 75:b4:24:cd:24:a6:a4:a4:a5:c7:da:6f:e7:29:ce:0f root@controller_10_1_2_230 The key's randomart image is: +--[ RSA 2048]----+ | o . +++ | | * o o =o. | | o + . . o | | + . . | | . . S | | . | | E . | | o.+ . | | .oo+ | +-----------------+ b、将key拷贝至远端 [root@controller_10_1_2_230 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@controller_10_1_2_230 The authenticity of host '[controller_10_1_2_230]:32200 ([10.1.2.230]:32200)' can't be established. RSA key fingerprint is 7c:6b:e6:d5:b9:cc:09:d2:b7:bb:db:a4:41:aa:5e:34. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '[controller_10_1_2_230]:32200,[10.1.2.230]:32200' (RSA) to the list of known hosts. root@controller_10_1_2_230's password: Now try logging into the machine, with "ssh 'root@controller_10_1_2_230'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting. [root@controller_10_1_2_230 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@network_10_1_2_231 The authenticity of host '[network_10_1_2_231]:32200 ([10.1.2.231]:32200)' can't be established. RSA key fingerprint is de:27:84:74:d3:9c:cf:d5:d8:3e:c4:65:d5:9d:dc:9a. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '[network_10_1_2_231]:32200,[10.1.2.231]:32200' (RSA) to the list of known hosts. root@network_10_1_2_231's password: Now try logging into the machine, with "ssh 'root@network_10_1_2_231'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting. [root@controller_10_1_2_230 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub root@compute1_10_1_2_232 The authenticity of host '[compute1_10_1_2_232]:32200 ([10.1.2.232]:32200)' can't be established. RSA key fingerprint is d7:3a:1a:3d:b5:26:78:6a:39:5e:bd:5d:d4:96:29:0f. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '[compute1_10_1_2_232]:32200,[10.1.2.232]:32200' (RSA) to the list of known hosts. root@compute1_10_1_2_232's password: Now try logging into the machine, with "ssh 'root@compute1_10_1_2_232'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting. c、测试是否能无密码登陆 [root@controller_10_1_2_230 ~]# ssh root@compute1_10_1_2_232 'df -h' Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 3.3G 6.1G 35% / tmpfs 3.9G 8.0K 3.9G 1% /dev/shm /dev/sda1 1008M 82M 876M 9% /boot /dev/sda4 913G 33M 913G 1% /data1
6.创建初始Monitor节点
a、创建配置目录，后续所有的操作都在该目录下执行
[root@controller_10_1_2_230 ~]# mkdir ceph-deploy
[root@controller_10_1_2_230 ~]# cd ceph-deploy/
b、新建一个集群
[root@controller_10_1_2_230 ceph-deploy]# ceph-deploy new --cluster-network 10.1.2.0/24 --public-network 10.1.2.0/24 controller_10_1_2_230
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.19): /usr/bin/ceph-deploy new --cluster-network 10.1.2.0/24 --public-network 10.1.2.0/24 controller_10_1_2_230
[ceph_deploy.new][DEBUG ] Creating new cluster named ceph
[ceph_deploy.new][INFO ] making sure passwordless SSH succeeds
[controller_10_1_2_230][DEBUG ] connected to host: controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] detect platform information from remote host
[controller_10_1_2_230][DEBUG ] detect machine type
[controller_10_1_2_230][DEBUG ] find the location of an executable
[controller_10_1_2_230][INFO ] Running command: /sbin/ip link show
[controller_10_1_2_230][INFO ] Running command: /sbin/ip addr show
[controller_10_1_2_230][DEBUG ] IP addresses found: ['10.1.2.230']
[ceph_deploy.new][DEBUG ] Resolving host controller_10_1_2_230
[ceph_deploy.new][DEBUG ] Monitor controller_10_1_2_230 at 10.1.2.230
[ceph_deploy.new][DEBUG ] Monitor initial members are ['controller_10_1_2_230']
[ceph_deploy.new][DEBUG ] Monitor addrs are ['10.1.2.230']
[ceph_deploy.new][DEBUG ] Creating a random mon key...
[ceph_deploy.new][DEBUG ] Writing monitor keyring to ceph.mon.keyring...
[ceph_deploy.new][DEBUG ] Writing initial config to ceph.conf...
Error in sys.exitfunc:
c、修改副本的个数
[root@controller_10_1_2_230 ceph-deploy]# vim ceph.conf
[global]
auth_service_required = cephx
filestore_xattr_use_omap = true
auth_client_required = cephx
auth_cluster_required = cephx #开启ceph认证
mon_host = 10.1.2.230 #monitor的ip地址
public_network = 10.1.2.0/24 #ceph共有网络，即访问的网络
mon_initial_members = controller_10_1_2_230 #初始的monitor，建议是奇数，防止脑裂
cluster_network = 10.1.2.0/24 #ceph集群内网
fsid = 07462638-a00f-476f-8257-3f4c9ec12d6e #fsid号码
osd pool default size = 2 #replicate的个数
d、monitor初始化
[root@controller_10_1_2_230 ceph-deploy]# ceph-deploy mon create-initial
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.19): /usr/bin/ceph-deploy mon create-initial
[ceph_deploy.mon][DEBUG ] Deploying mon, cluster ceph hosts controller_10_1_2_230
[ceph_deploy.mon][DEBUG ] detecting platform for host controller_10_1_2_230 ...
[controller_10_1_2_230][DEBUG ] connected to host: controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] detect platform information from remote host
[controller_10_1_2_230][DEBUG ] detect machine type
[ceph_deploy.mon][INFO ] distro info: CentOS 6.5 Final
[controller_10_1_2_230][DEBUG ] determining if provided host has same hostname in remote
[controller_10_1_2_230][DEBUG ] get remote short hostname
[controller_10_1_2_230][DEBUG ] deploying mon to controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] get remote short hostname
[controller_10_1_2_230][DEBUG ] remote hostname: controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[controller_10_1_2_230][DEBUG ] create the mon path if it does not exist
[controller_10_1_2_230][DEBUG ] checking for done path: /var/lib/ceph/mon/ceph-controller_10_1_2_230/done
[controller_10_1_2_230][DEBUG ] done path does not exist: /var/lib/ceph/mon/ceph-controller_10_1_2_230/done
[controller_10_1_2_230][INFO ] creating keyring file: /var/lib/ceph/tmp/ceph-controller_10_1_2_230.mon.keyring
[controller_10_1_2_230][DEBUG ] create the monitor keyring file
[controller_10_1_2_230][INFO ] Running command: ceph-mon --cluster ceph --mkfs -i controller_10_1_2_230 --keyring /var/lib/ceph/tmp/ceph-controller_10_1_2_230.mon.keyring
[controller_10_1_2_230][DEBUG ] ceph-mon: renaming mon.noname-a 10.1.2.230:6789/0 to mon.controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] ceph-mon: set fsid to 07462638-a00f-476f-8257-3f4c9ec12d6e
[controller_10_1_2_230][DEBUG ] ceph-mon: created monfs at /var/lib/ceph/mon/ceph-controller_10_1_2_230 for mon.controller_10_1_2_230
[controller_10_1_2_230][INFO ] unlinking keyring file /var/lib/ceph/tmp/ceph-controller_10_1_2_230.mon.keyring
[controller_10_1_2_230][DEBUG ] create a done file to avoid re-doing the mon deployment
[controller_10_1_2_230][DEBUG ] create the init path if it does not exist
[controller_10_1_2_230][DEBUG ] locating the `service` executable...
[controller_10_1_2_230][INFO ] Running command: /sbin/service ceph -c /etc/ceph/ceph.conf start mon.controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] === mon.controller_10_1_2_230 ===
[controller_10_1_2_230][DEBUG ] Starting Ceph mon.controller_10_1_2_230 on controller_10_1_2_230...
[controller_10_1_2_230][DEBUG ] Starting ceph-create-keys on controller_10_1_2_230...
[controller_10_1_2_230][INFO ] Running command: chkconfig ceph on
[controller_10_1_2_230][INFO ] Running command: ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.controller_10_1_2_230.asok mon_status
[controller_10_1_2_230][DEBUG ] ********************************************************************************
[controller_10_1_2_230][DEBUG ] status for monitor: mon.controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] {
[controller_10_1_2_230][DEBUG ] "election_epoch": 2,
[controller_10_1_2_230][DEBUG ] "extra_probe_peers": [],
[controller_10_1_2_230][DEBUG ] "monmap": {
[controller_10_1_2_230][DEBUG ] "created": "0.000000",
[controller_10_1_2_230][DEBUG ] "epoch": 1,
[controller_10_1_2_230][DEBUG ] "fsid": "07462638-a00f-476f-8257-3f4c9ec12d6e",
[controller_10_1_2_230][DEBUG ] "modified": "0.000000",
[controller_10_1_2_230][DEBUG ] "mons": [
[controller_10_1_2_230][DEBUG ] {
[controller_10_1_2_230][DEBUG ] "addr": "10.1.2.230:6789/0",
[controller_10_1_2_230][DEBUG ] "name": "controller_10_1_2_230",
[controller_10_1_2_230][DEBUG ] "rank": 0
[controller_10_1_2_230][DEBUG ] }
[controller_10_1_2_230][DEBUG ] ]
[controller_10_1_2_230][DEBUG ] },
[controller_10_1_2_230][DEBUG ] "name": "controller_10_1_2_230",
[controller_10_1_2_230][DEBUG ] "outside_quorum": [],
[controller_10_1_2_230][DEBUG ] "quorum": [
[controller_10_1_2_230][DEBUG ] 0
[controller_10_1_2_230][DEBUG ] ],
[controller_10_1_2_230][DEBUG ] "rank": 0,
[controller_10_1_2_230][DEBUG ] "state": "leader",
[controller_10_1_2_230][DEBUG ] "sync_provider": []
[controller_10_1_2_230][DEBUG ] }
[controller_10_1_2_230][DEBUG ] ********************************************************************************
[controller_10_1_2_230][INFO ] monitor: mon.controller_10_1_2_230 is running
[controller_10_1_2_230][INFO ] Running command: ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.controller_10_1_2_230.asok mon_status
[ceph_deploy.mon][INFO ] processing monitor mon.controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] connected to host: controller_10_1_2_230
[controller_10_1_2_230][INFO ] Running command: ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.controller_10_1_2_230.asok mon_status
[ceph_deploy.mon][INFO ] mon.controller_10_1_2_230 monitor has reached quorum!
[ceph_deploy.mon][INFO ] all initial monitors are running and have formed quorum
[ceph_deploy.mon][INFO ] Running gatherkeys...
[ceph_deploy.gatherkeys][DEBUG ] Checking controller_10_1_2_230 for /etc/ceph/ceph.client.admin.keyring
[controller_10_1_2_230][DEBUG ] connected to host: controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] detect platform information from remote host
[controller_10_1_2_230][DEBUG ] detect machine type
[controller_10_1_2_230][DEBUG ] fetch remote file
[ceph_deploy.gatherkeys][DEBUG ] Got ceph.client.admin.keyring key from controller_10_1_2_230.
[ceph_deploy.gatherkeys][DEBUG ] Have ceph.mon.keyring
[ceph_deploy.gatherkeys][DEBUG ] Checking controller_10_1_2_230 for /var/lib/ceph/bootstrap-osd/ceph.keyring
[controller_10_1_2_230][DEBUG ] connected to host: controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] detect platform information from remote host
[controller_10_1_2_230][DEBUG ] detect machine type
[controller_10_1_2_230][DEBUG ] fetch remote file
[ceph_deploy.gatherkeys][DEBUG ] Got ceph.bootstrap-osd.keyring key from controller_10_1_2_230.
[ceph_deploy.gatherkeys][DEBUG ] Checking controller_10_1_2_230 for /var/lib/ceph/bootstrap-mds/ceph.keyring
[controller_10_1_2_230][DEBUG ] connected to host: controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] detect platform information from remote host
[controller_10_1_2_230][DEBUG ] detect machine type
[controller_10_1_2_230][DEBUG ] fetch remote file
[ceph_deploy.gatherkeys][DEBUG ] Got ceph.bootstrap-mds.keyring key from controller_10_1_2_230.
Error in sys.exitfunc:
e、校验ceph状态
[root@controller_10_1_2_230 ceph-deploy]# ceph -s
cluster 07462638-a00f-476f-8257-3f4c9ec12d6e
health HEALTH_ERR 64 pgs stuck inactive; 64 pgs stuck unclean; no osds
monmap e1: 1 mons at {controller_10_1_2_230=10.1.2.230:6789/0}, election epoch 2, quorum 0 controller_10_1_2_230
osdmap e1: 0 osds: 0 up, 0 in
pgmap v2: 64 pgs, 1 pools, 0 bytes data, 0 objects
0 kB used, 0 kB / 0 kB avail
64 creating
PS:由于目前还没有OSD，所有集群目前的health健康状态为:HEALTH_ERR,添加之后，就不会报错了@@
7.添加OSD，按照准备条件，先格式化为xfs文件系统并挂载
a、创建目录
[root@controller_10_1_2_230 ceph-deploy]# ssh root@network_10_1_2_231 'mkdir -pv /data1/osd0'
mkdir: created directory `/data1/osd0'
[root@controller_10_1_2_230 ceph-deploy]# ssh compute1_10_1_2_232 'mkdir -pv /data1/osd1'
mkdir: created directory `/data1/osd1'
b、OSD准备
[root@controller_10_1_2_230 ceph-deploy]# ceph-deploy osd prepare network_10_1_2_231:/data1/osd0 compute1_10_1_2_232:/data1/osd1
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.19): /usr/bin/ceph-deploy osd prepare network_10_1_2_231:/data1/osd0 compute1_10_1_2_232:/data1/osd1
[ceph_deploy.osd][DEBUG ] Preparing cluster ceph disks network_10_1_2_231:/data1/osd0: compute1_10_1_2_232:/data1/osd1:
[network_10_1_2_231][DEBUG ] connected to host: network_10_1_2_231
[network_10_1_2_231][DEBUG ] detect platform information from remote host
[network_10_1_2_231][DEBUG ] detect machine type
[ceph_deploy.osd][INFO ] Distro info: CentOS 6.5 Final
[ceph_deploy.osd][DEBUG ] Deploying osd to network_10_1_2_231
[network_10_1_2_231][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[network_10_1_2_231][WARNIN] osd keyring does not exist yet, creating one
[network_10_1_2_231][DEBUG ] create a keyring file
[network_10_1_2_231][INFO ] Running command: udevadm trigger --subsystem-match=block --action=add
[ceph_deploy.osd][DEBUG ] Preparing host network_10_1_2_231 disk /data1/osd0 journal None activate False
[network_10_1_2_231][INFO ] Running command: ceph-disk -v prepare --fs-type xfs --cluster ceph -- /data1/osd0
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=fsid
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_mkfs_options_xfs
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_fs_mkfs_options_xfs
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_mount_options_xfs
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_fs_mount_options_xfs
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=osd_journal_size
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Preparing osd data dir /data1/osd0
[network_10_1_2_231][INFO ] checking OSD status...
[network_10_1_2_231][INFO ] Running command: ceph --cluster=ceph osd stat --format=json
[ceph_deploy.osd][DEBUG ] Host network_10_1_2_231 is now ready for osd use.
[compute1_10_1_2_232][DEBUG ] connected to host: compute1_10_1_2_232
[compute1_10_1_2_232][DEBUG ] detect platform information from remote host
[compute1_10_1_2_232][DEBUG ] detect machine type
[ceph_deploy.osd][INFO ] Distro info: CentOS 6.5 Final
[ceph_deploy.osd][DEBUG ] Deploying osd to compute1_10_1_2_232
[compute1_10_1_2_232][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[compute1_10_1_2_232][WARNIN] osd keyring does not exist yet, creating one
[compute1_10_1_2_232][DEBUG ] create a keyring file
[compute1_10_1_2_232][INFO ] Running command: udevadm trigger --subsystem-match=block --action=add
[ceph_deploy.osd][DEBUG ] Preparing host compute1_10_1_2_232 disk /data1/osd1 journal None activate False
[compute1_10_1_2_232][INFO ] Running command: ceph-disk -v prepare --fs-type xfs --cluster ceph -- /data1/osd1
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=fsid
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_mkfs_options_xfs
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_fs_mkfs_options_xfs
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_mount_options_xfs
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_fs_mount_options_xfs
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=osd_journal_size
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Preparing osd data dir /data1/osd1
[compute1_10_1_2_232][INFO ] checking OSD status...
[compute1_10_1_2_232][INFO ] Running command: ceph --cluster=ceph osd stat --format=json
[ceph_deploy.osd][DEBUG ] Host compute1_10_1_2_232 is now ready for osd use.
Error in sys.exitfunc:
c、激活OSD
[root@controller_10_1_2_230 ceph-deploy]# ceph-deploy osd activate network_10_1_2_231:/data1/osd0 compute1_10_1_2_232:/data1/osd1
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.19): /usr/bin/ceph-deploy osd activate network_10_1_2_231:/data1/osd0 compute1_10_1_2_232:/data1/osd1
[ceph_deploy.osd][DEBUG ] Activating cluster ceph disks network_10_1_2_231:/data1/osd0: compute1_10_1_2_232:/data1/osd1:
[network_10_1_2_231][DEBUG ] connected to host: network_10_1_2_231
[network_10_1_2_231][DEBUG ] detect platform information from remote host
[network_10_1_2_231][DEBUG ] detect machine type
[ceph_deploy.osd][INFO ] Distro info: CentOS 6.5 Final
[ceph_deploy.osd][DEBUG ] activating host network_10_1_2_231 disk /data1/osd0
[ceph_deploy.osd][DEBUG ] will use init type: sysvinit
[network_10_1_2_231][INFO ] Running command: ceph-disk -v activate --mark-init sysvinit --mount /data1/osd0
[network_10_1_2_231][DEBUG ] === osd.0 ===
[network_10_1_2_231][DEBUG ] Starting Ceph osd.0 on network_10_1_2_231...
[network_10_1_2_231][DEBUG ] starting osd.0 at :/0 osd_data /var/lib/ceph/osd/ceph-0 /var/lib/ceph/osd/ceph-0/journal
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Cluster uuid is 07462638-a00f-476f-8257-3f4c9ec12d6e
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=fsid
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Cluster name is ceph
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:OSD uuid is 6d298aa5-b33b-4d93-8ac4-efaa671200e5
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Allocating OSD id...
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring osd create --concise 6d298aa5-b33b-4d93-8ac4-efaa671200e5
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:OSD id is 0
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Initializing OSD...
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring mon getmap -o /data1/osd0/activate.monmap
[network_10_1_2_231][WARNIN] got monmap epoch 1
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster ceph --mkfs --mkkey -i 0 --monmap /data1/osd0/activate.monmap --osd-data /data1/osd0 --osd-journal /data1/osd0/journal --osd-uuid 6d298aa5-b33b-4d93-8ac4-efaa671200e5 --keyring /data1/osd0/keyring
[network_10_1_2_231][WARNIN] 2016-01-28 15:48:59.836760 7f2ec01337a0 -1 journal FileJournal::_open: disabling aio for non-block journal. Use journal_force_aio to force use of aio anyway
[network_10_1_2_231][WARNIN] 2016-01-28 15:49:00.053509 7f2ec01337a0 -1 journal FileJournal::_open: disabling aio for non-block journal. Use journal_force_aio to force use of aio anyway
[network_10_1_2_231][WARNIN] 2016-01-28 15:49:00.053971 7f2ec01337a0 -1 filestore(/data1/osd0) could not find 23c2fcde/osd_superblock/0//-1 in index: (2) No such file or directory
[network_10_1_2_231][WARNIN] 2016-01-28 15:49:00.262211 7f2ec01337a0 -1 created object store /data1/osd0 journal /data1/osd0/journal for osd.0 fsid 07462638-a00f-476f-8257-3f4c9ec12d6e
[network_10_1_2_231][WARNIN] 2016-01-28 15:49:00.262234 7f2ec01337a0 -1 auth: error reading file: /data1/osd0/keyring: can't open /data1/osd0/keyring: (2) No such file or directory
[network_10_1_2_231][WARNIN] 2016-01-28 15:49:00.262280 7f2ec01337a0 -1 created new key in keyring /data1/osd0/keyring
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Marking with init system sysvinit
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Authorizing OSD key...
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring auth add osd.0 -i /data1/osd0/keyring osd allow * mon allow profile osd
[network_10_1_2_231][WARNIN] added key for osd.0
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:ceph osd.0 data dir is ready at /data1/osd0
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Creating symlink /var/lib/ceph/osd/ceph-0 -> /data1/osd0
[network_10_1_2_231][WARNIN] DEBUG:ceph-disk:Starting ceph osd.0...
[network_10_1_2_231][WARNIN] INFO:ceph-disk:Running command: /sbin/service ceph start osd.0
[network_10_1_2_231][WARNIN] create-or-move updating item name 'osd.0' weight 0.89 at location {host=network_10_1_2_231,root=default} to crush map
[network_10_1_2_231][INFO ] checking OSD status...
[network_10_1_2_231][INFO ] Running command: ceph --cluster=ceph osd stat --format=json
[network_10_1_2_231][INFO ] Running command: chkconfig ceph on
[compute1_10_1_2_232][DEBUG ] connected to host: compute1_10_1_2_232
[compute1_10_1_2_232][DEBUG ] detect platform information from remote host
[compute1_10_1_2_232][DEBUG ] detect machine type
[ceph_deploy.osd][INFO ] Distro info: CentOS 6.5 Final
[ceph_deploy.osd][DEBUG ] activating host compute1_10_1_2_232 disk /data1/osd1
[ceph_deploy.osd][DEBUG ] will use init type: sysvinit
[compute1_10_1_2_232][INFO ] Running command: ceph-disk -v activate --mark-init sysvinit --mount /data1/osd1
[compute1_10_1_2_232][DEBUG ] === osd.1 ===
[compute1_10_1_2_232][DEBUG ] Starting Ceph osd.1 on compute1_10_1_2_232...
[compute1_10_1_2_232][DEBUG ] starting osd.1 at :/0 osd_data /var/lib/ceph/osd/ceph-1 /var/lib/ceph/osd/ceph-1/journal
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Cluster uuid is 07462638-a00f-476f-8257-3f4c9ec12d6e
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=fsid
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Cluster name is ceph
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:OSD uuid is 770582a6-e408-4fb8-b59b-8b781d5e226b
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Allocating OSD id...
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring osd create --concise 770582a6-e408-4fb8-b59b-8b781d5e226b
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:OSD id is 1
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Initializing OSD...
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring mon getmap -o /data1/osd1/activate.monmap
[compute1_10_1_2_232][WARNIN] got monmap epoch 1
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster ceph --mkfs --mkkey -i 1 --monmap /data1/osd1/activate.monmap --osd-data /data1/osd1 --osd-journal /data1/osd1/journal --osd-uuid 770582a6-e408-4fb8-b59b-8b781d5e226b --keyring /data1/osd1/keyring
[compute1_10_1_2_232][WARNIN] 2016-01-28 15:49:08.734889 7fad7e2a3800 -1 journal FileJournal::_open: disabling aio for non-block journal. Use journal_force_aio to force use of aio anyway
[compute1_10_1_2_232][WARNIN] 2016-01-28 15:49:08.976634 7fad7e2a3800 -1 journal FileJournal::_open: disabling aio for non-block journal. Use journal_force_aio to force use of aio anyway
[compute1_10_1_2_232][WARNIN] 2016-01-28 15:49:08.976965 7fad7e2a3800 -1 filestore(/data1/osd1) could not find 23c2fcde/osd_superblock/0//-1 in index: (2) No such file or directory
[compute1_10_1_2_232][WARNIN] 2016-01-28 15:49:09.285254 7fad7e2a3800 -1 created object store /data1/osd1 journal /data1/osd1/journal for osd.1 fsid 07462638-a00f-476f-8257-3f4c9ec12d6e
[compute1_10_1_2_232][WARNIN] 2016-01-28 15:49:09.285287 7fad7e2a3800 -1 auth: error reading file: /data1/osd1/keyring: can't open /data1/osd1/keyring: (2) No such file or directory
[compute1_10_1_2_232][WARNIN] 2016-01-28 15:49:09.285358 7fad7e2a3800 -1 created new key in keyring /data1/osd1/keyring
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Marking with init system sysvinit
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Authorizing OSD key...
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring auth add osd.1 -i /data1/osd1/keyring osd allow * mon allow profile osd
[compute1_10_1_2_232][WARNIN] added key for osd.1
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:ceph osd.1 data dir is ready at /data1/osd1
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Creating symlink /var/lib/ceph/osd/ceph-1 -> /data1/osd1
[compute1_10_1_2_232][WARNIN] DEBUG:ceph-disk:Starting ceph osd.1...
[compute1_10_1_2_232][WARNIN] INFO:ceph-disk:Running command: /sbin/service ceph --cluster ceph start osd.1
[compute1_10_1_2_232][WARNIN] libust[36314/36314]: Warning: HOME environment variable not set. Disabling LTTng-UST per-user tracing. (in setup_local_apps() at lttng-ust-comm.c:305)
[compute1_10_1_2_232][WARNIN] create-or-move updating item name 'osd.1' weight 0.89 at location {host=compute1_10_1_2_232,root=default} to crush map
[compute1_10_1_2_232][WARNIN] libust[36363/36363]: Warning: HOME environment variable not set. Disabling LTTng-UST per-user tracing. (in setup_local_apps() at lttng-ust-comm.c:305)
[compute1_10_1_2_232][INFO ] checking OSD status...
[compute1_10_1_2_232][INFO ] Running command: ceph --cluster=ceph osd stat --format=json
[compute1_10_1_2_232][INFO ] Running command: chkconfig ceph on
Error in sys.exitfunc:
d、再次校验ceph状态
[root@controller_10_1_2_230 ceph-deploy]# ceph -s
cluster 07462638-a00f-476f-8257-3f4c9ec12d6e
health HEALTH_OK #状态为OK了
monmap e1: 1 mons at {controller_10_1_2_230=10.1.2.230:6789/0}, election epoch 2, quorum 0 controller_10_1_2_230 #monitor信息
osdmap e8: 2 osds: 2 up, 2 in #osd信息，有2个OSD，2个状态都是up
pgmap v14: 64 pgs, 1 pools, 0 bytes data, 0 objects
10305 MB used, 1814 GB / 1824 GB avail
64 active+clean
8. 拷贝管理秘钥至其他节点
[root@controller_10_1_2_230 ceph-deploy]# ceph-deploy admin controller_10_1_2_230 network_10_1_2_231 compute1_10_1_2_232
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.19): /usr/bin/ceph-deploy admin controller_10_1_2_230 network_10_1_2_231 compute1_10_1_2_232
[ceph_deploy.admin][DEBUG ] Pushing admin keys and conf to controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] connected to host: controller_10_1_2_230
[controller_10_1_2_230][DEBUG ] detect platform information from remote host
[controller_10_1_2_230][DEBUG ] detect machine type
[controller_10_1_2_230][DEBUG ] get remote short hostname
[controller_10_1_2_230][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[ceph_deploy.admin][DEBUG ] Pushing admin keys and conf to network_10_1_2_231
[network_10_1_2_231][DEBUG ] connected to host: network_10_1_2_231
[network_10_1_2_231][DEBUG ] detect platform information from remote host
[network_10_1_2_231][DEBUG ] detect machine type
[network_10_1_2_231][DEBUG ] get remote short hostname
[network_10_1_2_231][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[ceph_deploy.admin][DEBUG ] Pushing admin keys and conf to compute1_10_1_2_232
[compute1_10_1_2_232][DEBUG ] connected to host: compute1_10_1_2_232
[compute1_10_1_2_232][DEBUG ] detect platform information from remote host
[compute1_10_1_2_232][DEBUG ] detect machine type
[compute1_10_1_2_232][DEBUG ] get remote short hostname
[compute1_10_1_2_232][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
Error in sys.exitfunc:
其他节点也能够管理ceph集群
[root@network_10_1_2_231 ~]# ll /etc/ceph/ceph.client.admin.keyring
-rw-r--r-- 1 root root 63 Jan 28 15:52 /etc/ceph/ceph.client.admin.keyring
[root@network_10_1_2_231 ~]# ceph health
HEALTH_OK
[root@network_10_1_2_231 ~]# ceph -s
cluster 07462638-a00f-476f-8257-3f4c9ec12d6e
health HEALTH_OK
monmap e1: 1 mons at {controller_10_1_2_230=10.1.2.230:6789/0}, election epoch 2, quorum 0 controller_10_1_2_230
osdmap e8: 2 osds: 2 up, 2 in
pgmap v15: 64 pgs, 1 pools, 0 bytes data, 0 objects
10305 MB used, 1814 GB / 1824 GB avail
64 active+clean
至此，基本的ceph配置完毕！！！
4. 总结
以上配置是ceph的最基本的配置，此处只是作为练习使用，在生产中，实际用ceph，需要考虑的因素非常多，如monitor需要有3个，ceph的集群网络和公共网络的规划，OSD策略的调整等等，请继续关注我的blog，后续将会以ceph系列文章的形式出现，此处只是做简单的演示，接下来的博客，将介绍ceph和glance，nova，以及cinder结合，敬请关注！
5.参考链接
http://docs.ceph.com/docs/master/start/quick-ceph-deploy
本文出自 “Happy实验室” 博客，谢绝转载！