kernel-switch

hyh@hyh-OptiPlex-9020:~/workspace/msm/msm8994/MSM8994/android/kernel/drivers$ cat !$
cat switch/switch_gpio.c
/*
 *  drivers/switch/switch_gpio.c
 *
 * Copyright (C) 2008 Google, Inc.
 * Author: Mike Lockwood <[email protected]>
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
*/

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/switch.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>

struct gpio_switch_data {
    struct switch_dev sdev;
    unsigned gpio;
    const char *name_on;
    const char *name_off;
    const char *state_on;
    const char *state_off;
    int irq;
    struct work_struct work;
};

static void gpio_switch_work(struct work_struct *work)
{
    int state;
    struct gpio_switch_data    *data =
        container_of(work, struct gpio_switch_data, work);

    state = gpio_get_value(data->gpio);
    switch_set_state(&data->sdev, state);
}

static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
{
    struct gpio_switch_data *switch_data =
        (struct gpio_switch_data *)dev_id;

    schedule_work(&switch_data->work);
    return IRQ_HANDLED;
}

static ssize_t switch_gpio_print_state(struct switch_dev *sdev, char *buf)
{
    struct gpio_switch_data    *switch_data =
        container_of(sdev, struct gpio_switch_data, sdev);
    const char *state;
    if (switch_get_state(sdev))
        state = switch_data->state_on;
    else
        state = switch_data->state_off;

    if (state)
        return sprintf(buf, "%s\n", state);
    return -1;
}

static int gpio_switch_probe(struct platform_device *pdev)
{
    struct gpio_switch_platform_data *pdata = pdev->dev.platform_data;
    struct gpio_switch_data *switch_data;
    int ret = 0;

    if (!pdata)
        return -EBUSY;

    switch_data = kzalloc(sizeof(struct gpio_switch_data), GFP_KERNEL);
    if (!switch_data)
        return -ENOMEM;

    switch_data->sdev.name = pdata->name;
    switch_data->gpio = pdata->gpio;
    switch_data->name_on = pdata->name_on;
    switch_data->name_off = pdata->name_off;
    switch_data->state_on = pdata->state_on;
    switch_data->state_off = pdata->state_off;
    switch_data->sdev.print_state = switch_gpio_print_state;

    ret = switch_dev_register(&switch_data->sdev);
    if (ret < 0)
        goto err_switch_dev_register;

    ret = gpio_request(switch_data->gpio, pdev->name);
    if (ret < 0)
        goto err_request_gpio;

    ret = gpio_direction_input(switch_data->gpio);
    if (ret < 0)
        goto err_set_gpio_input;

    INIT_WORK(&switch_data->work, gpio_switch_work);

    switch_data->irq = gpio_to_irq(switch_data->gpio);
    if (switch_data->irq < 0) {
        ret = switch_data->irq;
        goto err_detect_irq_num_failed;
    }

    ret = request_irq(switch_data->irq, gpio_irq_handler,
              IRQF_TRIGGER_LOW, pdev->name, switch_data);
    if (ret < 0)
        goto err_request_irq;

    /* Perform initial detection */
    gpio_switch_work(&switch_data->work);

    return 0;

err_request_irq:
err_detect_irq_num_failed:
err_set_gpio_input:
    gpio_free(switch_data->gpio);
err_request_gpio:
    switch_dev_unregister(&switch_data->sdev);
err_switch_dev_register:
    kfree(switch_data);

    return ret;
}

static int gpio_switch_remove(struct platform_device *pdev)
{
    struct gpio_switch_data *switch_data = platform_get_drvdata(pdev);

    cancel_work_sync(&switch_data->work);
    gpio_free(switch_data->gpio);
    switch_dev_unregister(&switch_data->sdev);
    kfree(switch_data);

    return 0; }

static struct platform_driver gpio_switch_driver = {
    .probe        = gpio_switch_probe,
    .remove        = gpio_switch_remove,
    .driver        = {
        .name    = "switch-gpio",
        .owner    = THIS_MODULE,
    },
};

static int __init gpio_switch_init(void)
{
    return platform_driver_register(&gpio_switch_driver);
}

static void __exit gpio_switch_exit(void)
{
    platform_driver_unregister(&gpio_switch_driver);
}

module_init(gpio_switch_init);
module_exit(gpio_switch_exit);

MODULE_AUTHOR("Mike Lockwood <[email protected]>");
MODULE_DESCRIPTION("GPIO Switch driver");
MODULE_LICENSE("GPL");
hyh@hyh-OptiPlex-9020:~/workspace/msm/msm8994/MSM8994/android/kernel/drivers$


你可能感兴趣的:(kernel-switch)