Nagios太阳(pnp)安装配置

Nagios太阳（pnp）安装配置 一．安装rrdtool RRDTOOL将nagios采集的数据绘制成图表。 #wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.4.3.tar.gz #tar zxvf rrdtool-1.4.3.tar.gz -C ../software #cd ../softwar/rrdtool-1.4.3 #./configure --prefix=/usr/local/rrdtool/ --with-perl-options=/usr/bin/perl 指定perl路径 #make #make install 二．安装pnp #wget http://downloads.sourceforge.net/project/pnp4nagios/PNP/pnp-0.4.14/pnp-0.4.14.tar.gz?use_mirror=nchc #tar zxvf pnp-0.4.14.tar.gz -C ../software/ #cd ../software/pnp-0.4.14 #./configure \ --with-nagios-user=nagios\ --with-nagios-group=nagios\ --with-rrdtool=/usr/local/rrdtool/bin/rrdtool\ 指定rrdtool路径 --with-perfdata-dir=/usr/local/nagios/share/perfdata/ 指定perfdata存放路径 General Options: ------------------------- ------------------- Nagios user/group: nagios nagios Install directory: /usr/local/nagios HTML Dir: /usr/local/nagios/share/pnp Config Dir: /usr/local/nagios/etc/pnp Location of rrdtool binary: /usr/local/rrdtool/bin/rrdtool Version 1.4.3 RRDs Perl Modules: FOUND (Version 1.4003) RRD Files stored in: /usr/local/nagios/share/perfdata/ process_perfdata.pl Logfile: /usr/local/nagios/var/perfdata.log Perfdata files (NPCD) stored in: /usr/local/nagios/var/spool/perfdata/ #make all #make install #make install-config #make install-init 三．配置nagios #vi /usr/local/nagios/etc/nagios (在880行左右) process_performance_data=1 //开启收集perfdata（默认是关闭的） host_perfdata_command=process-host-perfdata service_perfdata_command=process-service-perfdata #vi /usr/local/nagios/etc/objects/commands.cfg 增加对process-host-perfdata，process-service-perfdata命令的定义 define command{ command_name process-service-perfdata //定义命令名称 command_line /usr/local/nagios/libexec/process_perfdata.pl //指定命名 } define command{ command_name process-service-perfdata command_line /usr/local/nagios/libexec/process_perfdata.pl } # vi /usr/local/nagios/etc/objects/templates.cfg 添加太阳图标，配置前端页面 define service{ name generic-service process_perf_data 1 //开启收集perfdata action_url /nagios/pnp/index.php?host=$HOSTNAME$&srv=$SERVICEDESC$ //定义URL } define service{ name local-service use generic-service action_url /nagios/pnp/index.php?host=$HOSTNAME$ process_perf_data 1 } # /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg 检测配置 #service nagios restart 四．验证 http://ip/nagios/pnp/