Dell服务器MegaCli命令只返回Exit Code: 0x00问题分析

今天同事给我说一台dell的服务器做了raid后，使用MegaCli看不到raid信息，上去看了一下确实不返回任何raid信息，但是确实机器上做了raid。

这就奇怪了，然后把MegaCli升级到最新版，还是同样的结果

公司用的基本上都是dell系列的服务器，之前机器的raid信息都是MegaCli获取的，这几情况就有点怪异了。因为之前遇到过raid卡版本导致的其他问题，所以这次也怀疑是不是raid卡版本导致的问题，所以打算看看系统raid卡的版本信息

没有找到raid信息，不过看了一下SCSI控制器的信息，根据SAS1068E上网一查，得出SAS1068E的raid卡是SAS 6i/R。

为啥SAS 6i/R的raid信息用MegaCli64命令就获取不到呢，SAS 6/iR 只支持2块硬盘做raid0或者raid1。现在返回去看看MegaCli64工具，MegaCli64工具虽然非常好用，功能也很多，不仅能查看RAID卡信息，而且还能设置RAID卡，但是它却不支持SAS 6/iR的RAID卡，Dell好多1U型号的服务器默认的RAID控制器都是SAS 6i/R ，而对于这款控制器MegaCli64是不能使用的。那为什么MegaCli64不支持SAS 6i/R呢，因为megacli是为PERC控制器设计的(它使用的是大家熟悉的megaraid驱动)，但是SAS 6i/R控制器针对的是mpt*类型的驱动，所以MegaCli64取不出raid信息。不过想在命令行模式下想管理SAS 6i/R，可以使用Lsiutil这个工具。

下载lsiutil工具

链接：

ftp://ftp.ntplx.net/pub/LSI/LSIUtil_1.62.zip

解压后看到支持的系统还是蛮多的啊

我是linux 64位的系统，在linux目录下直接拷贝lsiutil.x86_64到目标机器上，修改为可执行权限。下面我们来看看lsiutil.x86_64怎么用，lsiutil.x86_64有两种模式，一种是交互式的，一种是命令行模式：

lsiutil.x86_64 交互式

lsiutil.x86_64 命令行式

可以看到lsiutil.x86_64也是可以查看raid信息的。帮助文档如下：

http://www.thomas-krenn.com/de/wikiDE/images/4/44/Lsi_userguide_2006_20130528.pdf

如果你是debian/ubuntu系统，则可以下载相应的deb包

wget 'http://hwraid.le-vert.net/debian/pool-wheezy/lsiutil_1.60-1_amd64.deb' dpkg -i lsiutil_1.60-1_amd64.deb 

关于次问题的官方解释如下：

http://lists.us.dell.com/pipermail/linux-poweredge/2009-March/038758.html

下面附上MegaCli64的返回状态码信息

MegaCLI Error Messages

0x00 Command completed successfully
0x01 Invalid command 0x02 DCMD opcode is invalid 0x03 Input parameters are invalid 0x04 Invalid sequence number 0x05 Abort isn't possible for the requested command 0x06 Application 'host' code not found 0x07 Application already in use - try later 0x08 Application not initialized 0x09 Given array index is invalid 0x0a Unable to add missing drive to array, as row has no empty slots 0x0b Some of the CFG resources conflict with each other or the current config 0x0c Invalid device ID / select-timeout 0x0d Drive is too small for requested operation 0x0e Flash memory allocation failed 0x0f Flash download already in progress 0x10 Flash operation failed 0x11 Flash image was bad 0x12 Downloaded flash image is incomplete 0x13 Flash OPEN was not done 0x14 Flash sequence is not active 0x15 Flush command failed 0x16 Specified application doesn't have host-resident code 0x17 LD operation not possibe - CC is in progress 0x18 LD initialization in progress 0x19 LBA is out of range 0x1a Maximum LDs are already configured 0x1b LD is not OPTIMAL 0x1c LD Rebuild is in progress 0x1d LD is undergoing reconstruction 0x1e LD RAID level is wrong for requested operation 0x1f Too many spares assigned 0x20 Scratch memory not available - try command again later 0x21 Error writing MFC data to SEEPROM 0x22 Required HW is missing (i.e. Alarm or BBU) 0x23 Item not found 0x24 LD drives are not within an enclosure 0x25 PD CLEAR operation is in progress 0x26 Unable to use SATA(SAS) drive to replace SAS(SATA) 0x27 Patrol Read is disabled 0x28 Given row index is invalid 0x2d SCSI command done, but non-GOOD status was received - see mf.hdr.extStatus for SCSI_STATUS 0x2e IO request for MFI_CMD_OP_PD_SCSI failed - see extStatus for DM error 0x2f Matches SCSI RESERVATION_CONFLICT 0x30 One or more of the flush operations failed 0x31 FW real-time currently not set 0x32 Command issues while FW in wrong state (i.e. GET RECON when op not active) 0x33 LD is not OFFLINE - IO not possible 0x34 Peer controller rejected request (possibly due to resource conflict) 0x35 Unable to inform peer of communication changes (retry might be appropriate) 0x36 LD reservation already in progress 0x37 I2C errors were detected 0x38 PCI errors occurred during XOR/DMA operation 0x39 Diagnostics failed - see event log for details 0x3a Unable to process command as boot messages are pending 0x3b Returned in case if foreign configurations are imcomplete 0x3d Returned in case if a command is tried on unsupported hardware 0x3e CC scheduling is disabled 0x3f PD CopyBack operation is in progress 0x40 Selected more than one PD per array 0x41 Microcode update operation failed 0x42 Unable to process command as drive security feature is not enabled 0x43 Controller already has a lock key 0x44 Lock key cannot be backed-up 0x45 Lock key backup cannot be verified 0x46 Lock key from backup failed verification 0x47 Rekey operation not allowed, unless controller already has a lock key 0x48 Lock key is not valid, cannot authenticate 0x49 Lock key from escrow cannot be used 0x4a Lock key backup (pass-phrase) is required 0x4b Secure LD exist 0x4c LD secure operation is not allowed 0x4d Reprovisioning is not allowed 0x4e Drive security type (FDE or non-FDE) is not appropriate for requested operation 0x4f LD encryption type is not supported 0x50 Cannot mix FDE and non-FDE drives in same array 0x51 Cannot mix secure and unsecured LD in same array 0x52 Secret key not allowed 0x53 Physical device errors were detected 0x54 Controller has LD cache pinned 0x55 Requested operation is already in progress 0x56 Another power state set operation is in progress 0x57 Power state of device is not correct 0x58 No PD is available for patrol read 0x59 Controller resert is required 0x5a No EKM boot agent detected 0x5b No space on the snapshot repositiry VD 0x5c For consistency SET PiTs, some PiT creations might fail and some succeed 0xFF Invalid status - used for polling command completion 

 

http://www.codeweblog.com/dell%E6%9C%8D%E5%8A%A1%E5%99%A8megacli%E5%91%BD%E4%BB%A4%E5%8F%AA%E8%BF%94%E5%9B%9Eexit-code-0x00%E9%97%AE%E9%A2%98%E5%88%86%E6%9E%90/