Pktgen-DPDK install 安装部署
声明:此文档只做学习交流使用,请勿用作其他商业用途
author:朝阳_tonyE-mail : [email protected]
Create Date: 2013-7-10 13:59:31 Wednesday
Last Change: 2013-7-14 22:53:11 Sunday
转载请注明出处：http://blog.csdn.net/linzhaolover
此文中源码可以去http://dpdk.org/dev 网页中下载；更多官方文档请访问http://dpdk.org
Pktgen-DPDK介绍
Pktgen-DPDK是6wind基于intel dpdk开发的一个发包工具；用于测试dpdk的包转发能力；
可以在https://github.com/Pktgen/Pktgen-DPDK看到其详细信息；
我的测试环境为REHL6.2系统;
下载源码方式
git clone http://github.com/Pktgen/Pktgen-DPDK.git
安装编译源码；
下载源码后进入Pktgen-DPDK/dpdk目录，执行安装；
make install T=x86_64-wr-linuxapp-gcc
如遇下面的变量名重复定义错误；
In file included from /home/linzh/repo/Pktgen-DPDK/dpdk/lib/libwr_mcos/rte_mcos.c:81: /home/linzh/repo/Pktgen-DPDK/dpdk/lib/libwr_mcos/rte_mcos.h:321: error: redefinition of typedef ‘mcos_master_t’ /home/linzh/repo/Pktgen-DPDK/dpdk/lib/libwr_mcos/rte_mcos_debug.h:114: note: previous declaration of ‘mcos_master_t’ was here /home/linzh/repo/Pktgen-DPDK/dpdk/lib/libwr_mcos/rte_mcos.h:385: error: redefinition of typedef ‘mInfo_t’ /home/linzh/repo/Pktgen-DPDK/dpdk/lib/libwr_mcos/rte_mcos_debug.h:113: note: previous declaration of ‘mInfo_t’ was here需要自己去修改一下文件变量定义，我只是临时做了一下修改；
vim /home/linzh/repo/Pktgen-DPDK/dpdk/lib/libwr_mcos/rte_mcos_debug.h
%s/mInfo_t/mInfo_t_bak/g %s/mcos_master_t/mcos_master_t_bak/g将rte_mcos_debug.h文件中的mInfo_t 更名为mInfo_t_bak ， 将mcos_master_t 更名为mcos_master_t_bak ；
设置环境变量；
export RTE_SDK=`pwd` export RTE_TARGET=x86_64-wr-linuxapp-gcc
执行脚本进行安装配置；
./tools/setup.sh运行脚本后分别运行
[6] Insert IGB UIO module [7] Insert KNI module [8] Setup hugepage mappings for non-NUMA systems安装新的intel网卡驱动；
设置hugepage 信息，我输入了1024，也就是分配1024个2M的内存，等于2G的内存空间；
运行11，进行一下dpdk的测试；在11中如果一个core源码，如果输入 F 敲回车， 也就是用 0至3这几个core去测试；
[11] Run testpmd application in interactive mode ($RTE_TARGET/app/testpmd)
Option: 11 Enter hex bitmask of cores to execute testpmd app on Example: to execute app on cores 0 to 7, enter 0xff bitmask:F
输入F敲回车后，
显示下面的部分信息，说明成功了
Interactive-mode selected Configuring Port 0 PMD: To improve 1G driver performance, consider setting the TX WTHRESH value to 4, 8, or 16. Configuring Port 1 PMD: To improve 1G driver performance, consider setting the TX WTHRESH value to 4, 8, or 16. Configuring Port 2 PMD: To improve 1G driver performance, consider setting the TX WTHRESH value to 4, 8, or 16. Configuring Port 3 PMD: To improve 1G driver performance, consider setting the TX WTHRESH value to 4, 8, or 16. Checking link statuses... Port 0 Link Up - speed 1000 Mbps - full-duplex Port 1 Link Up - speed 1000 Mbps - full-duplex Port 2 Link Up - speed 1000 Mbps - full-duplex Port 3 Link Up - speed 1000 Mbps - full-duplex Done testpmd>
testpmd> start io packet forwarding - CRC stripping disabled - packets/burst=16 nb forwarding cores=1 - nb forwarding ports=4 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 TX queues=1 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=36 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0x0 testpmd> stop Telling cores to stop... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 24 RX-dropped: 0 RX-total: 24 TX-packets: 0 TX-dropped: 0 TX-total: 0 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 24 RX-dropped: 0 RX-total: 24 TX-packets: 0 TX-dropped: 0 TX-total: 0 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 2 ---------------------- RX-packets: 24 RX-dropped: 0 RX-total: 24 TX-packets: 0 TX-dropped: 0 TX-total: 0 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 3 ---------------------- RX-packets: 24 RX-dropped: 0 RX-total: 24 TX-packets: 0 TX-dropped: 0 TX-total: 0 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 96 RX-dropped: 0 RX-total: 96 TX-packets: 0 TX-dropped: 0 TX-total: 0 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. testpmd>
下面测试pktgen
进入Pktgen-DPDK/dpdk/wr-examples/pktgen目录；
执行make去编译pktgen;
运行setup脚本，去配置一下环境，这个脚本其实是配置了一下hugepage，和从新安装了一下intel网卡的驱动；
./setup
运行doit去测试pktgen；
./doit
如果发现报错；
EAL: coremask set to e EAL: Auto-detected process type: PRIMARY EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 8 on socket 0 EAL: Setting up hugepage memory... EAL: Ask a virtual area of 0x80000000 bytes EAL: Virtual area found at 0x7f1a14e00000 (size = 0x80000000) EAL: Not enough memory available on socket 1! Requested: 128MB, available: 0MB PANIC in rte_eal_init(): Cannot init memory 6: [./app/build/pktgen() [0x4038b9]] 5: [/lib64/libc.so.6(__libc_start_main+0xfd) [0x7f1a95368cdd]] 4: [./app/build/pktgen() [0x41595f]] 3: [./app/build/pktgen() [0x49aabb]] 2: [./app/build/pktgen() [0x49fea0]] 1: [./app/build/pktgen() [0x49fd86]] ./doit: line 8: 3445 Aborted (core dumped) ./app/build/pktgen -c e -n 3 --proc-type auto --socket-mem 128,128 --file-prefix pg -- -p 0x14 -P -m "2.0, 3.1" -f test/set_seq.cmd
这应该是执行程序是，传入测参数报错；
--socket-mem 128,128这参数有问题，我暂时没有解决方法，也不理解这个参数的具体用途 ；将后面的128去掉再运行；
./app/build/pktgen -c e -n 3 --proc-type auto --socket-mem 128 --file-prefix pg -- -p 0x14 -P -m "2.0, 3.1" -f test/set_seq.cmd
-c 是指选择的core的掩码， e 等于 1110 也就是选择 1 、 2 、3 号core；
--proc-type 选择的auto ，如果是当前系统第一执行的dpdk相关的程序，选择primary模式，如果是第二是 secondary 模式；
--file-prefix pg 设置/mnt/huge/内存分配模块的文件名前缀；
-p 0x14 0x14 等于 00010100 , 选择你当前系统的其中2块intel相关网卡端口；
-P 使能网络混装模式，
-m "2.0, 3.1" 这是指一个矩阵模型，2.0 是指，在2号lcore上绑定的端口0 ， 3.1 是指在 lcore3 上绑定端口1
-f test/set_seq.cmd 最后导入pktgen的执行配置文件；在执行pktgen时，利用配置产生数据包；
| Ports 0-1 of 2 ** Main Page ** Copyright (c) <2010-2013>, Wind River Systems, Inc., Powered by Intel® DPDK
Flags:Port : P---------:0 P---------:1
Link State : <UP-1000-FD> <UP-1000-FD> ---TotalRate---
Pkts/s Rx : 6 6 12
Tx : 0 0 0
MBits/s Rx/Tx : 0/0 0/0 0/0
Broadcast : 0 0
Multicast : 0 0
64 Bytes : 0 0
65-127 : 0 0
128-255 : 0 0
256-511 : 0 0
512-1023 : 0 0
1024-1518 : 0 0
Runts/Jumbos : 0/0 0/0
Errors Rx/Tx : 0/0 0/0
Total Rx Pkts : 39 13
Tx Pkts : 0 0
Rx MBs : 0 0
Tx MBs : 0 0
ARP/ICMP Pkts : 0/0 0/0
Tx Failed : 0 0
: 229386/1 229386/1
Tx Count/% Rate : Forever/100% Forever/100%
PktSize/Tx Burst : 64/128 64/128
Src/Dest Port : 1234/5678 1234/5678
Pkt Type:VLAN ID : IPv4/TCP:0001 IPv4/TCP:0001
Dst IP Address : 192.168.1.1 192.168.0.1
Src IP Address : 192.168.0.1/24 192.168.1.1/24
Dst MAC Address : 0016:31ff:d074 0016:31ff:d01a
Src MAC Address : 0016:31ff:d01a 0016:31ff:d074
-- Pktgen Ver:2.1.3(DPDK-1.3.0) -------------------------------------------------------------------------------------
pktgen> # *** Executing file (test/set_seq.cmd)
pktgen> *** Unable to find file (test/set_seq.cmd) or invalid call
pktgen>
技术水平有待提高，如有不对的地方希望读者指正，互相学习；O(∩_∩)O~