# pkgadd -d SUNWfusefs.pkg

# pkgadd -d SUNWlibfuse.pkg

# pkgadd -d ASntfs-3g-1.5012.pkg



alok@opensolaris:~$ su

Password:

alok@opensolaris:~# format

Searching for disks...done





AVAILABLE DISK SELECTIONS:

0. c5t0d0 
   
             ["DISK NUMBER"]
    

/pci@0,0/pci103c,30d9@1f,2/disk@0,0
    

Specify disk (enter its number): ^C 
    


    

[WARNING: Press Ctrl+C here and not enter. Otherwise you may format you Solaris partition]
    


    

alok@opensolaris:~# ntfs-3g /dev/dsk/c5t0d0p1 ~/Desktop/test [To mount my 30GB Windows Vista C: drive, an NTFS partition]
    


    

You don't at all require the FSWpart and FSWfsmisc utilities for mounting NTFS partitions. Notice that the disk number should be
    

entered exactly by you at ntfs-3g /dev/dsk/c5t0d0p1 ~/Desktop/test. [Usually after that disk number to locate NTFS partitions
    

typing p1, p2, p3...... suffices p1 means partition 1]. For FAT32 partitions you need not install anything. The mount support for
    

them is inbuilt in OpenSolaris's latest version. I mount my 90 GB FAT32 F: drive of Windows XP, the first FAT32 partition
    

in my Hard disk [with 30GB for OpenSolaris] by issuing:
    


    

# mount -F pcfs /dev/dsk/c5t0d0p0:c /mnt [c for first FAT32 partition if you have more, change c to d,e,f... etc and specify
    

different mount points]
    


    

You can also issue the command like ntfs-3g or simple mount by prefixing pfexec if you don't want to become "su" everytime like:
    


    

alok@opensolaris:~$ pfexec mount -F pcfs /dev/dsk/c5t0d0p0:c /mnt
    

alok@opensolaris:~$
    


    

or
    


    

alok@opensolaris:~$ pfexec ntfs-3g /dev/dsk/c5t0d0p1 ~/Desktop/test
    

alok@opensolaris:~$


柴油发电机
发电机
柴油机
柴油发电机
13636374743（上海）
13291526067（嘉兴）