MTK Android Driver :memory

3.1 型号配置:

3.1.1 CUSTOM_MEMORY_HDR(需要确认是否是MTK认证的flash ic)

mediatek\custom\$(PROJECT)\preloader\inc\custom_MemoryDevice.h

#defineBOARD_ID                MT6577_EVB

#defineCS_PART_NUMBER[0]      H9TP32A4GDMCPR_KDM

#defineCS_PART_NUMBER[1]       KMKUS000VM_B410

备注:新增flash ic添加到此处,flash可以做到兼容;不能兼容相同IC Idmemeory ic.

 

3.2 特定项目不同类型分区定义信息(是否定义、顺序):

mediatek\custom\prj\kernel\core\src\partition.c

structpart_name_map g_part_name_map[PART_MAX_COUNT] = {

         {"preloader", PART_PRELOADER,       "rawdata",    0,       0,       0},

         {"dsp_bl",    PART_DSP_DL,     "rawdata",    1,       0,       0},

         {"mbr",        PART_MBR,          "raw data",    2,       1,       1},

         {"ebr1",        PART_EBR1,         "raw data",    3,       1,       1},

         {"pmt",        PART_PMT, "raw data",    4,       0,       0},

         {"nvram",     PART_NVRAM,     "rawdata",    5,       0,       0},

         {"seccfg",     PART_SECURE,    "raw data",    6,       0,       0},

         {"uboot",      PART_UBOOT,      "raw data",    7,       1,       1},

         {"boot",       PART_BOOTIMG,  "raw data",    8,       1,       1},

         {"recovery",  PART_RECOVERY,         "rawdata",    9,       1,       1},

         {"sec_ro",     PART_SECSTATIC,         "ext4",         10,     0,       0},

         {"misc",       PART_MISC,         "raw data",    11,     0,       0},

         {"logo",       PART_LOGO,        "raw data",    12,     1,       1},

         {"expdb",     PART_APANIC,     "raw data",    13,     0,       0},

         {"system",    PART_ANDSYSIMG,       "ext4",         14,     1,       1},

         {"cache",      PART_CACHE,      "ext4",         15,     1,       1},

         {"userdata",   PART_USER,         "ext4",         16,     1,       1},

         {"fat", PART_FAT,   "fat",  17,     0,       0},

};

 

3.3  emmc scat 分区大小设置(emmc) :

可对emmc进行分区,修改preloader\systemimage\userdata\FAT等各个分区。

\alps\mediatek\build\tools\ptgen\MT6577\partition_table_MT6577.xls

备注:Cache分区需要保持在512mb左右,否则系统会比较慢,响应迟缓。

 

3.4 FLASH参数配置文件位置(MemoryDeviceList_MT6577.xls)

MEMORY_DEVICE_XLS =

mediatek\build\tools\emigen\$(MTK_PLATFORM)\MemoryDeviceList_$(MTK_PLATFORM).xls

.xls文件含三个页面:

MT6577(page one):配置Flash Vendor Id 对应的硬件参数。

NAND(page two):

emmc_region(pagethree)

 

3.5 Flash驱动电压修改,读写速度方式修改:

mediatek\custom\konka73_gb\kernel\core\src\board.c

         struct msdc_hw msdc0_hw = {

            .clk_src        = 1,

            .cmd_edge       =MSDC_SMPL_FALLING,

            .data_edge      =MSDC_SMPL_FALLING,

            .clk_drv        = 5, //: 0 //memory驱动电压

            .cmd_drv       = 5, //: 0

            .dat_drv        = 5, // : 0

#ifdefMTK_EMMC_SUPPORT

            .data_pins      = 8,

#else

            .data_pins      = 4,

#endif

            .data_offset    = 0,

#ifdefMTK_EMMC_SUPPORT

                   .flags          = MSDC_SYS_SUSPEND | MSDC_HIGHSPEED,//memory读写速度

                   //.flags                        = MSDC_SYS_SUSPEND,

#else

            .flags          =MSDC_SDCARD_FLAG,

#endif


3.6 emmc FAT分区划分:

emmc型号、emmc软件分区都会影响FAT分区的大小。

验证FAT Size需要对应emmc型号机器下载对应emmc软件分区的软件,不能预先下载FAT部分(影响实际FAT分区大小):

adb shell

cat /proc/emmc

cat /proc/partition获取大小。


3.7 ddr认证列表和时序集成(mtk或者ddr原厂提供)

alps\mediatek\build\tools\TabletEmiList\MT6582\TabletMemoryDeviceList_MT6582.xls


你可能感兴趣的:(MTK Android Driver :memory)