DM_FOREIGN
; $Id: dmforgn.e,v 5.12 1999/06/14 09:42:47 rogert Exp $
;
; dmDocbaseIdMap class and foreign/replicated object errors
;
.facility DM_FOREIGN
.severity TRACE
;
FOLDERMERGE_CHECK S "Checking Folder %s as part of distributed operation."
;
; Trace message during distributed replication or refresh operation.
; Tracing the checking to determine if the specified folder should be
; included in a replicated object.
;
;PARAMETERS:
; %s - The folder name
;
;
; Basic object warning codes.
;
.severity WARNING
LOAD_NO_IDMAP "Cannot lookup object_id mapping for foreign object because the server has not initialized its object_id map cache."
;
; During a non-relocate load operation a foreign object was found but could
; not be loaded due to there being no docbaseid map cache in the server.
;
;CAUSE: The server has apparently not initialized its docbaseid map cache.
;ACTION: Check for other errors in the error log.
; Report this message and any others to your Documentum site
; representative.
TOO_MANY_MAPS LL "Cannot add new replica objects from docbase id %d because the limit has already been reached of %d docbases participating in a replicated enterprise."
;
; During a load operation an object from a foreign docbase was encountered
; that had not previously had objects replicated to this docbase. The object
; could not be loaded because the hard limit of the maximum number of
; different docbases from which data can be replicated had already been
; reached.
;
;PARAMETERS:
; %d - docbase id from which objects are being imported
; %d - limit of number of docbases in a distributed setup
;
;CAUSE: The docbase has exceeded the limit on the number of docbases that
; can participate in a replicated environment.
;ACTION: Check docbase replication setup and docbase objects to see what
; docbases have had data replicated here. Look for extraneous data
; which may be removed.
;
SOURCE_REFRESH D "After a successful refresh of a replica or reference object, could not update the source object (%s) to show the refresh completion. This may cause the source to later needlessly re-execute the refresh."
;
; After a refresh, the save of the information on the source to show that the
; refresh occurred did not work.
;
;PARAMETERS:
; %1s - the source object
;CAUSE: The source object could not be updated.
;ACTION: No action necessary.
;
MAPINCOMPLETE D "Object could not be refreshed due to a problem computing the set of related objects needed in the refresh action. The state of object %s was unexpectedly unknown."
;
; The replica refresh operation must compute the set of all related objects
; and determine the state of those objects at the source and local sites.
; This error is given when the algorithm fails somehow leaving an object
; state unknown.
;
;PARAMETERS:
; %s - The object on which the error was encountered.
;CAUSE: A bug in the refresh map algorithm.
;ACTION: If the object being refreshed has child objects (annotations or
; VDM children) try refreshing the sub-objects first. Otherwise the
; object may have to be refreshed by the batch replica refresh job.
;
MULTI_SOURCE DD "Not Yet Supported: Refresh operation encountered a replica object (%s) from a docbase different than the original object being refreshed (%s). This multi-docbase replica relationship must be refreshed via the Replication Job."
;
; The refresh operation also refreshes related objects. The operation does
; not currently support refreshing related objects that are mastered in
; another docbase.
;
;PARAMETERS:
; %s - The object id which fell outside the base source.
; %s - The source replica id.
;CAUSE: Multi-source replica relationship not yet supported.
;ACTION: Try running batch-mode replication to bring over appropriate
; related objects.
;
UPDATE_NOREFRESH SSD "An update to a %s object was performed successfully, but the local information could not be properly refreshed to reflect the new object state. Local %s object %s is likely not up-to-date."
;
; The save of a replica or reference object succeeded. But the local info
; could not be refreshed to reflect the new changes.
;
; The local replica/reference was left out-of-date by the update operation.
; This could lead to confusion by the user (the object may still appear
; locked following a checkin) and later errors if further updates are
; attempted on the object (updates are not allowed using an out-of-date
; replica).
;
; The user should attempt a manual refresh of the object (refresh api) to
; bring it up-to-date.
;
;PARAMETERS:
; %s - replica/reference indicator
; %s - The object id of the local object.
; %s - replica/reference indicator
;CAUSE: Object could not be refreshed following update.
;ACTION: Check for previous error message which may give more detail on the
; problem. Re-try the refresh by using the "refresh" operation. If
; that still fails try enabling tracing during the refresh call.
;
.severity ERROR
MAP_UPDATE_PRIV S "No privilege to %s dm_docbaseid_map object. You must have at least SYSADMIN privilege."
;
;PARAMS: The type of update operation (save, delete).
;CAUSE: The user does not have privilege to update the specified type.
; Sysadmin (or higher) privilege is required.
;ACTION: Find system admin user to make required updates.
MAP_CANT_CHANGE "Cannot change r_docbase_id or r_id_offset fields of an existing dm_docbaseid_map."
;
;CAUSE: The user does not have privilege to update the specified type.
; The docbase_id and r_id_offset fields should never be changed in
; an existing map object as doing so will leaving existing objects
; orphaned.
;ACTION: Verify the intended operation. Changing docbaseid_map objects
; incorrectly will leave the docbase corrupted. If needed, the object
; can be changed by dropping it and creating a new one with the intended
; data.
MAP_COLLECTION "Error building collection of existing dm_docbaseid_map objects."
;
; During server startup, the server builds a cache of the existing docbaseid
; map objects, storing the ids of the docbases from which objects have been
; replicated and the internal_id offsets for thoses docbases.
;
; To do this, the server runs a query to build a collection of the existing
; map objects. This error is given when that query fails.
;
;CAUSE: Collection operation failed.
;ACTION: Check for previous error messages, especially those from the type
; the type manager or database manager.
; Report this message and any parameters to your Documentum site
; representative.
MAP_CREATE "Error creating server dm_docbaseid_map cache."
;
; During server startup, the server builds a cache of the existing docbaseid
; map objects, storing the ids of the docbases from which objects have been
; replicated and the internal_id offsets for thoses docbases.
;
; This error is given when the cache creation fails.
;
;CAUSE: Probably the docbaseid_map collection operation failed.
;ACTION: Check for previous error messages, especially those from the type
; the type manager or database manager.
; Report this message and any parameters to your Documentum site
; representative.
LOAD_NEW_MAP L "Error creating new dm_docbaseid_map object for docbase %d."
;
; During a load operation an object from a foreign docbase was encountered
; that had not previously had objects replicated to this docbase. The object
; could not be loaded due to a failure creating a new docbaseid map for
; this docbase.
;
;PARAMETERS:
; %d - docbase id from which objects are being imported
;
;CAUSE: Save operation failed on new dm_docbaseid_map object.
;ACTION: Check for previous error messages, especially those from the object
; manager or database manager.
; Report this message and any parameters to your Documentum site
; representative.
; If solution can't be foudn
REPLICA_UPDATE SS "Attempt to update a foreign object. The object %s of type %s cannot be updated because it is a replica."
;
; Replica objects are copies of objects from other docbases imported locally
; for document sharing. They are imported via non-relocate Load operations
; as part of a replicated docbase setup.
;
; Replica objects cannot be updated. To update the document you must connect
; directly to the master docbase and update the master copy, then replicate
; the changes back to your local docbase. The master docbase can be found
; using the object id of the foreign object.
;
;PARAMETERS:
; %s - object id of replica
; %s - type name of replica object
;
;CAUSE: Object is a replica and cannot be updated.
;ACTION: Check update statement to see if update is really desired on this
; object and alter statement if appropriate. If foreign object must
; be updated, the update can be made at the master docbase. If a
; local-only update is necessary, consider making a local copy of
; the object (see SAVEASNEW method).
NOT_SYSADMIN "Cannot update foreign objects without at least System Admin privilege."
;
; Replica objects are normally read-only. They cannot be set to updatable
; without system admin privilege.
;
;CAUSE: Insufficient privilege for the current command.
;ACTION: Check for replica update requirements. In general, replicas should
; not be directly updated as it may affect operation of replication
; processing.
OBJECT_VSTAMP SLL "Cannot load object %s because its version stamp value (i_vstamp = %d) exceeds the maximum allowable distributed version stamp of %d."
;
; Currently the system uses to the object version stamp for two purposes with
; distributed objects. It tracks the version stamp of the local object and
; the version stamp of the original object from which it was replicated.
;
; This imposes a version limit of 64k on each replicated object.
;
;PARAMETERS:
; %s - the object id
; %d - the object version stamp
; %d - the maximum allowable version stamp
;
;CAUSE: The object being loaded had a version stamp greater than 64k.
;ACTION: The object cannot be imported into this docbase unless the version
; stamp at the master docbase is altered. The easiest way to do this
; may be to create a new copy of the object (saveasnew) at the master
; docbase which will start with a new version stamp and then discard
; the old object.
REF_IMMUTABLE S "Attempt to modify an immutable field (%s) of a dm_reference object."
;
; The update operation on a dm_reference object attempted to modify an
; immutable field. Some fields of the dm_reference object cannot be changed
; once they are set at object creation time. Refer to the Documentation on
; distributed objects for more information on these fields.
;
;PARAMETERS:
; %s - the modified field name
;
;CAUSE: This field cannot be changed in an existing dm_reference object.
;ACTION: Do not attempt to update this field.
REF_UPDATE_PRIV S "You do not have privilege to %s this object."
;
; The update operation on a dm_reference object failed due to insufficient
; privilege.
;
;PARAMETERS:
; %s - the type of update operation
;
;CAUSE: Insufficient privilege to perform the requested update.
;ACTION: Check for privileges on the specified object.
REF_DIRECT_DELETE "You cannot delete this dm_reference object directly. To properly remove a reference link delete the mirror object, which will cause the associated dm_reference object to be deleted as well."
;
; The attempt to explicitly delete a dm_reference object failed. The proper
; way to remove a reference link is not to delete the dm_reference object but
; to delete the associated mirror object. This will also trigger the delete
; of the dm_reference entry. The mirror object can be found via the
; dm_reference.r_mirror_object_id field.
;
; This check can be bypassed with system admin privilege.
;
;PARAMETERS: None
;CAUSE: Incorrect protocol for deleting a reference object.
;ACTION: Delete the associated mirror object instead.
INDEX_CREATE SS "Error during type initialization. Could not create index on %s.%s."
;
; The call to create a database index on the dm_reference type failed.
;
;PARAMETERS:
; %1s - The type name (dm_reference)
; %2s - The first column specified in the index create request
;
;CAUSE: The create index command failed
;ACTION: Check for additional logged errors for more information - especially
; for any database errors. Check the database server logs for database
; index creation errors.
DEREFERENCE_ERROR D "Error referencing through object (%s)."
;
; An error was encountered while dereferencing a Reference Object link.
;
; On commands such as "fetch,c,@obj_id" the action is redirected to the
; docbase/object pointed to by the local reference object 'obj_id'. This
; involves looking up the local reference information (in the dm_reference
; table), connecting to the remote docbase, and determining which version
; of the referenced object the command should apply to.
;
;PARAMETERS:
; %1s - The object id of the local object.
;
;CAUSE: The error could be caused by a number of things - most likely
; the inability to reach the remotely referenced docbase. Previous
; errors in the error stream should give a better indication of the
; specific problem.
;ACTION: Check for previous errors giving more specific information.
; Check that the referenced docbase is reachable and available.
;
DMREF_LOOKUP D "Error fetching dm_reference object for (%s)."
;
; An error was encountered while looking up or fetching the dm_reference
; entry for a reference or replica object.
;
; Each reference or replica object in a docbase has a corresponding entry
; in dm_reference. The dm_reference record points back to the local object
; by its r_mirror_object_id attribute.
;
; The error could have occurred while querying for a dm_reference object
; with the an r_mirror_object_id value matching the specified object id,
; or while fetching the qualifying dm_reference. Other errors in the
; error stream should indicate which one and give more information on the
; specific error.
;
; Note that the non-existence of a qualifying dm_reference object will NOT
; be treated as an error.
;
;PARAMETERS:
; %1s - The object id of the local object.
;
;CAUSE: The error could have been caused by a query error with the server
; or by an object fetching error.
;ACTION: Check for previous errors giving more specific information.
;
DMREF_MISSING D "Error: no dm_reference record found for object (%s)."
;
; An error was encountered while dereferencing a Reference Object link.
;
; No dm_reference entry was found for the specified object, even though the
; object indicated it was a replica (i_is_replica = True) or a reference link
; (i_is_reference = True). This should never be the case.
;
; Each reference or replica object in a docbase has a corresponding entry
; in dm_reference. The dm_reference record points back to the local object
; by its r_mirror_object_id attribute.
;
;
;PARAMETERS:
; %1s - The object id of the local object.
;
;CAUSE: There could be an inconsistency in the docbase.
;ACTION: Check for previous error messages and check the session log to see
; if there was just a query error that made it look like there was no
; corresponding dm_reference object. Query the docbase to look for
; a dm_reference object with an r_mirror_object_id equal to the
; specified object id. Verify that the object indicated by the
; specified id is indeed a replica or reference link.
;
; If the local object is indeed a reference or replica, the best
; solution may be to delete it and recreate it.
;
REF_INCOMPATIBLE SSS "The local object (%s) references an object in an incompatible docbase (%s). This object cannot be dereferenced until the remote docbase is upgraded. The remote docbase version is currently %s."
;
; A reference or replica object points to an object in a docbase that is not
; compatible with the local docbase.
;
; The object cannot be dereferenced until the remote docbase is upgraded.
;
;PARAMETERS:
; %1s - The object id of the local object.
; %2s - The remote docbase name.
; %3s - The version of the remote docbase.
;
;CAUSE: Remote docbase is not compatible with the local docbase.
;ACTION: Until the remote docbase is upgraded, the local object cannot be
; dereferenced. To access the remote object you must go directly
; to that docbase and fetch the referenced object explicitly.
;
REF_FETCH_INFO SSS "Error fetching information for the object referenced by local object (%s). Remote docbase is %s and remote object id is (%s)."
;
; In order to dereference a local reference or replica object, the dmcl sends
; a special ReferenceFetchInfo apply call to the server to compute the remote
; object to which the reference points and to determine if the remote object
; is out-of-date with the local mirror object.
;
; This error indicates that the apply call has failed.
;
;PARAMETERS:
; %1s - The object id of the local object.
; %2s - The remote docbase name.
; %3s - The referenced object.
;
;CAUSE: The remote docbase may be inaccessible.
;ACTION: Check for previous errors giving more specific information.
; Check that the referenced docbase is reachable and available.
;
REFERENCE_NONE SSSS "Error dereferencing the object (%s) - the referenced object was not found in docbase %s. Remote object id was (%s) and version label requested was '%s'."
;
; Referencing through a reference/replica object found no match at the remote
; docbase. Either the referenced object has been deleted or the user
; requested a version label for which there is no matching version of the
; remote object.
;
;PARAMETERS:
; %1s - The object id of the local object.
; %2s - The remote docbase name.
; %3s - The referenced object.
; %4s - The version label binding applied.
;
;CAUSE: Likely either the referenced object has been deleted or the user
; requested a version label for which there is no matching version of
; the remote object.
;ACTION: Query the remote docbase to verify the existence/non-existence of
; the referenced object. If it has been deleted the user may
; want to consider removing the reference to the object.
;
REPLICA_GLOBAL SSS "Attempt to locally modify a global attribute of a foreign object. Attribute %s.%s cannot be updated on replica object %s."
;
; Replica objects are copies of objects from other docbases imported locally
; for document sharing. They are managed internally by documentum replication
; services.
;
; Only local attributes of replica objects can be locally modified. Global
; attribute changes can only be made at the source object. To update the
; object you must connect directly to the master docbase and update the
; master copy, then replicate the changes back to your local docbase.
;
;PARAMETERS:
; %1s - type name of replica object
; %2s - name of global attribute to which change was attempted
; %3s - object id of replica object
;
;CAUSE: Object is a replica and cannot be updated.
;ACTION: Check update statement to see if update is really desired on this
; object and alter statement if appropriate. If foreign object must
; be updated, the update can be made at the master docbase. If a
; local-only update is necessary, consider making a local copy of
; the object (see SAVEASNEW method).
REFERENCE_GLOBAL SS "Attempt to locally modify a global attribute of a reference object. Attribute %s cannot be updated on reference object %s."
;
; Reference objects are pointers to other documents commonly on outside
; docbases. The global attributes of the reference object's meta-data
; mirror the source document and cannot be changed directly.
;
; Only local attributes of reference objects can be locally modified. Global
; attribute changes can only be made at the source document.
;
; The source document can be updated through the reference indirect syntax:
; set,session,@object_id,attribute_name
; save,session,@object_id
;
;PARAMETERS:
; %1s - name of global attribute to which change was attempted
; %2s - object id of reference object
;
;CAUSE: Object is a reference and cannot be directly updated.
;ACTION: Check update statement to see if update is really desired on this
; object and alter statement if appropriate. If the referenced object
; must be updated, the update can be made by query at the master docbase
; or by indirect api operations (@object_id syntax).
;
NO_DOCBASE_NAME "The reference cannot be created because no docbase name was specified. The reference_docbase_name attribute must be set."
;
; The save request of a dm_reference object failed because the required
; attribute - reference_docbase_name - was not specified.
;
;PARAMETERS: None
;CAUSE: The required attribute - reference_docbase_name - was not specified.
;ACTION: Set the required field and resave the object.
;
NO_OBJECT_GIVEN "The reference cannot be created because no object to reference was specified. Either the reference_by_id or the reference_by_name attribute must be set."
;
; The save request of a dm_reference object failed because one of the required
; attributes - reference_by_id or reference_by_name - was not specified.
;
;PARAMETERS: None
;CAUSE: One of - reference_by_id or reference_by_name - must be set.
;ACTION: Set the required field and resave the object.
;
AMBIGUOUS_REQUEST "The reference cannot be created because both the object to reference was specified both by name and by id. Only one of the reference_by_id and reference_by_name fields can be set."
;
; The save request of a dm_reference object failed because values were
; specified for both of the mutually-exclusive fields: reference_by_id and
; reference_by_name.
;
;PARAMETERS: None
;CAUSE: Values were specified for both of the mutually-exclusive fields:
; reference_by_id and reference_by_name.
;ACTION: Choose one option and set that field only, then resave the object.
;
INVALID_VALUE S "The reference cannot be created because an invalid value was specified for the attribute: %s."
;
; The save request of a dm_reference object failed because the value given
; for one of the attributes was not valid for that field.
;
;PARAMETERS:
; %1s - the name of the attribute with the invalid value.
;CAUSE: The value given for one of the attributes was not valid.
;ACTION: Correct the specified attribute and resave the object.
;
EXACT_ID_NAME "The reference cannot be created because an invalid binding condition was specified. When referencing a document by Name, VERSION_LABEL binding must be used."
;
; The save request of a dm_reference object failed because the value given
; for one of the attributes was not valid for that field. The field was
; the binding_condition attribute which specifies to bind by Version-label or
; by Exact-Id. The Exact-Id binding type can only be used when the remote
; document is referenced by ID, not by name.
;
;PARAMETERS: None
;CAUSE: The value given for one of the attributes was not valid.
;ACTION: Correct the specified attribute and resave the object.
;
BAD_FOLDER_LINK SS "The reference cannot be created because '%s' is not valid for %s. You must specify an existing folder or cabinet of the local docbase, either by ID (eg. 0b0015b480001b4f) or by Name (eg. /cabinet/subfolder)."
;
; The save request of a dm_reference object failed because the value given
; for one of the attributes was not valid for that field. The field was the
; local_folder_link attribute - which specifies a local folder/cabinet into
; which to link the resulting reference object. The local_folder_link must
; specify an existing folder or cabinet.
;
; The local_folder_link can be specified by id or by name. In the latter case
; the full path to the folder must be specified.
;
;PARAMETERS:
; %1s - the invalid attribute value.
; %2s - the name of the attribute with the invalid value.
;CAUSE: The value given for one of the attributes was not valid.
;ACTION: Correct the specified attribute and resave the object.
;
SERVER_VERSION SSS "Distributed Features are not accessible on docbase %s because it is of an incompatible version (server version %s). Docbases must be at least version %s to participate in distributed operations."
;
; An attempt to create a distributed relationship or to move data between
; docbases was attempted, but could not be satisfied because one of the
; docbases was not running at the correct server version.
;
; The action cannot be performed unless the docbase is upgraded to the
; specified version.
;
;PARAMETERS:
; %1s - the incompatible docbase's name.
; %2s - the server version of the above docbase.
; %3s - the required version for distributed features.
;CAUSE: The docbase does not support the requested operation.
;ACTION: The action cannot be performed unless the docbase is upgraded to the
; specified version.
;
SERVER_SECURITY S "Distributed Features are not accessible on docbase %s because it uses an incompatible security mode. Docbases must use ACL mode security to participate in distributed operations."
;
; An attempt to create a distributed relationship or to move data between
; docbases was attempted, but could not be satisfied because one of the
; docbases was not using ACL mode security.
;
; The action cannot be performed unless the docbase is converted to use
; ACL mode security.
;
;PARAMETERS:
; %1s - the incompatible docbase's name.
;CAUSE: The docbase does not support the requested operation.
;ACTION: The action cannot be performed unless the docbase is upgraded to use
; ACL mode security.
;
SOURCE_NOTFOUND SSSS "The requested source object was not found. No object matching the %s (%s) with version label (%s) was found in docbase %s."
;
; The creation of a reference object failed because the requested object could
; not be found in the referenced docbase.
;
;PARAMETERS:
; %1s - indicates by name or id search
; %2s - the requested object name and path
; %3s - the version label requested
; %4s - the referenced docbase name
;CAUSE: The requested object was not found.
;ACTION: Check to make sure the remote docbase is available and accessible.
; Verify the object name specified and make sure that the full path
; to the object is included (eg. /Cabinet/folder/subfolder/object_name).
;
SOURCE_CANT_FETCH DS "The requested source object was not found. Could not fetch object (%s) from docbase %s."
;
; The creation or refresh of a reference object failed because the requested
; object could not be found in the referenced docbase.
;
;PARAMETERS:
; %1s - the requested object id
; %2s - the referenced docbase name
;CAUSE: The requested object was not found.
;ACTION: Check to make sure the remote docbase is available and accessible.
; Verify the object id specified and make sure that it exists.
; Check for other messages that may indicate an error during the fetch
; operation.
;
SOURCE_NOT_SYSOBJ D "The reference cannot be created because object '%s' is not a dm_sysobject or dm_sysobject subtype. Only dm_sysobject based objects can be referenced."
;
; The creation of a reference object failed because the requested object was
; not legal to reference.
;
;PARAMETERS:
; %1s - the requested object id
;CAUSE: The requested object was not of a sysobject-based type.
;ACTION: This object cannot be referenced.
;
TYPE_INCOMPATIBLE SS "The reference cannot be created because the %s type from docbase %s is not compatible with the local docbase."
;
; The creation of a reference object failed because the requested object was
; of a type that could not be imported into the local docbase.
;
;PARAMETERS:
; %1s - the requested object's type
; %2s - the referenced docbase
;CAUSE: The requested object's type was incompatible with the local docbase.
;ACTION: The object cannot be referenced unless the base types are made to
; be compatible.
;
NEW_SYSOBJECT S "Error creating a new object of type %s during the creation of a reference link."
;
; The creation of a reference object failed because of an error creating a
; new object to hold the copy of the referenced object's meta-data.
;
;PARAMETERS:
; %1s - the local object's type
;CAUSE: The server could not create an object of the requested type.
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem.
;
REF_MIRROR_CREATE SS "Error creating reference to object %s. Could not save the local mirror object (%s)."
;
; The creation of a reference object failed because of an error creating a
; new object to hold the copy of the referenced object's meta-data.
;
;PARAMETERS:
; %1s - the referenced object's id.
; %2s - the local object which could not be saved.
;CAUSE: The server could not create the local sysobject reference.
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem.
;
REF_CREATE SS "Error creating reference to object %s. Could not save the local dm_reference object (%s)."
;
; The creation of a reference object failed because of an error saving the
; local dm_reference object.
;
;PARAMETERS:
; %1s - the reference object id.
; %2s - the local object which could not be saved.
;CAUSE: The server could not create the local object.
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem.
;
REF_MIRROR_UPDATE S "Error updating reference object %s. Could not save the local mirror object."
;
; The update of reference object information failed because of an error
; saving the updating mirror object - which holds the copy of the referenced
; object's meta-data.
;
;PARAMETERS:
; %1s - the reference object id.
;CAUSE: The server could not save the local sysobject reference.
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem.
;
REF_UPDATE SS "Error updating reference object %s. Could not save the local dm_reference object (%s)."
;
; The update of reference object information failed because of an error
; saving the local dm_reference object.
;
;PARAMETERS:
; %1s - the referenced object's id.
; %2s - the local object which could not be saved.
;CAUSE: The server could not save the local object.
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem.
;
INTERNAL_ERROR I "Internal error (%d) in Reference Object operation."
;
; Similar to an assertion check, this error is generated by an unexpected
; occurrence in Reference Object handling.
;
;PARAMETERS:
; %1d - marker to which operation produced the error.
;CAUSE: Internal error.
;ACTION: Check for previous errors which could give more detail on the cause
; of the problem. Also check the server and session logs for any
; errors which could have led to the problem.
;
CURSOR_FAIL SSS "In operation %s an attempt to execute cursor failed; query was: '%s'; error from database system was: %s"
;
; During an attempt to execute a database cursor, a failure occurred. The
; error message gives the reference operation that was being performed, the
; query on which the failure occurred, and the database error string.
;
;PARAMETERS:
; %1s - the referenced operation
; %2s - the cursor query
; %3s - the database error string
;CAUSE: The cursor is executed and failed because of possible db errors.
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem.
;
REFINFO_NOT_SYSOBJ S "ReferenceFetchInfo Operation failed because caller requested acl information on a non-sysobject (%s)."
;
; Server call to get replica or reference refresh information failed because
; the caller (dmcl) requested improper information for a non-sysobject based
; object.
;
;PARAMETERS:
; %1s - the requested object id
;CAUSE: The requested object was not of a sysobject-based type.
;ACTION: Report error to Document Technical Support.
;
REFINFO_NO_ACL S "ReferenceFetchInfo Operation could not find requested ACL information for object (%s)."
;
; Server call to get replica or reference refresh information failed because
; the server could not find the acl for the requested object.
;
;PARAMETERS:
; %1s - the requested object id
;CAUSE: Could not find acl for requested object.
;ACTION: Check the object identified by id to see if the ACL indicated by the
; object's acl_name/acl_domain fields exists. Check the session log
; for errors which may give further information the the cause of the
; error.
;
COULD_NOT_REFRESH SDSD "Unable to dynamically refresh %s object (%s) from it's source object. The local object may not be an up-to-date copy. Master docbase is %s. Master object is (%s)."
;
; The attempt to refresh a replica or reference object from it's soure object
; failed for some reason. Previous error messages should give more detail
; on why the failure occurred.
;
; Local docbase operations will continue with the currently cached copy of
; the object, which may be out-of-date.
;
; This refresh could have been requested explicitly by the user or could have
; been triggered by an update.
;
; Note that if this error occurs following an update, the update will have
; been made successfully, but the update will not be reflected in the local
; copy.
;
;PARAMETERS:
; %1s - indicator of replica or reference refresh
; %2s - The object id of the local object.
; %3s - The docbase where the master object resides.
; %4s - The object id of the master object.
;CAUSE: Could be a number of reasons:
; - inability to connect to the source docbase
; - source object no longer exists
; - inconsistencies in reference/replica catalogs
;ACTION: Check other error messages which should give a more detailed
; explanation of the error. Also check the server session logs.
;
UPDATE_NULL_REF SS "Unable to update reference/replica (%s) to show that the object it points to does not exist. Could not update i_null_ref_flag in object %s."
;
; The attempt to update a reference object to show that the object it points
; to does not exist anymore failed for some reason. Previous error messages
; should give more detail on why the failure occurred.
;
; The local reference object will remain usable, but will not reflect the
; null-reference property.
;
;PARAMETERS:
; %1s - object id of reference/replica object
; %2s - object id of the dm_reference catalog object
;CAUSE: Transaction or object update error. Other error messages should have
; been logged giving a more precise reason for the failure.
;ACTION: Check other error messages which should give a more detailed
; explanation of the error. Also check the server session logs
; for errors.
;
ACL_NOT_FOUND SSSS "Error processing reference object - could not find acl %s.%s in docbase %s for sysobject (%s)."
;
; A create or update operation on a reference/replica failed due to the
; inability to find the named acl object associated with a referenced object.
;
;PARAMETERS:
; %1s - the acl domain
; %2s - the acl name
; %3s - the docbase where the acl should have been
; %4s - the object id of the sysobject which points to the acl
;CAUSE: An attempt to query for the acl by name failed.
;ACTION: Check if the ACL exists for the specified object. If not then this
; object is not consistent and cannot be referenced or replicated.
; Check other error messages which should give a more detailed
; explanation of the error. Also check the server session logs
; for errors.
;
REF_NOT_ALLOWED S "Illegal operation invoked on a reference object. This operation (%s) should be directed to the source object rather than the reference."
;
; An update operation was requested on a reference object which was not
; appropriate for a reference. The request (eg. checkout) needs to be
; performed on the source object rather than the reference object.
;
; This can be easily done through the dereference syntax:
; checkout,c,@ref_obj <- applies operation to source object
;
;PARAMETERS:
; %1s - the operation type
;CAUSE: Operation was not appropriate for a reference object.
;ACTION: Check the request to see if it is an attempt to modify the source
; object: if so, modify the request to direct the update there; if
; not, check that the update does not attempt to modify globally
; managed attributes of the local reference.
;
NOT_IMPLEMENTED S "Distributed operation (%s) not supported."
;
; Operation not yet supported.
;
;PARAMETERS:
; %1s - the operation type
;CAUSE: Not implemented yet.
;ACTION: none
;
DESTROY_REPLICA SS "Cannot destroy the replica object (%s) because %s."
;
;PARAMETERS:
; %s - replica object id
; %s - reason
;
;CAUSE: See reason.
DIST_REFRESH S "Error in refresh operation for object (%s)."
;
; An error occurred during a distributed object refresh. The local replica
; or reference link could not be updated with the current copy from the master
; docbase.
;
; The session log (at the local server) should give more information
; on why the action failed.
;
;PARAMETERS:
; %1s - The object id of the local object.
;
;CAUSE: The local server refused the refresh request.
;ACTION: Check for previous error messages and check the server session log.
;
NOT_DISTRIBUTED "Distributed operation requested on an object which is neither a replica nor a reference link."
;
; Distributed operations seek to refresh, update or lookup information through
; a pointer to a remote object. This type of operation can be done with a
; replica or a reference object.
;
; This error was caused by an attempt to execute a distributed operation on
; a local non-distributed object.
;
;PARAMETERS: None
;CAUSE: The operation is not legal.
;ACTION: Correct the request.
;
REFRESH_MISMATCH SLLSS "Refresh operation on object (%s) failed because the object fetched from the master docbase was inconsistent with the local object. Global vstamp: %d, Refresh vstamp: %d; Master id: %s, Refresh id: %s."
;
; The refresh request was refused by the local server because the information
; with which to refresh did not appear consistent. It either came from the
; wrong object or had a version stamp that was prior to the latest local copy.
;
;PARAMETERS:
; %1s - The object id of the local object.
; %2d - The Global Vstamp as recorded locally.
; %3d - The vstamp of the refresh object.
; %4s - The master object id as recorded locally.
; %5s - The object id of the refresh object.
;CAUSE: This may be caused by an inconsistency in the local copy of the object.
;ACTION: If the object cannot be refreshed on repeated attempts, delete the
; copy and recreate the reference/replica.
;
REFRESH_SAVE "The server ReferenceRefresh operation failed."
;
; The refresh request failed due to an error saving the updated local object.
;
;PARAMETERS: none
;CAUSE: The failure occurred on the server request to update the local object.
;ACTION: Check other error messages which should give a more detailed
; explanation of the error. Since the error likely occurred on the
; server check the local server session log. It should give more
; information on the error.
;
REFRESHACL_SAVE "The server ReferenceRefreshAcl operation failed."
;
; The refresh request failed due to an error saving the updated local object
; security.
;
;PARAMETERS: none
;CAUSE: The failure occurred on the server request to update the local object.
;ACTION: Check other error messages which should give a more detailed
; explanation of the error. Since the error likely occurred on the
; server check the local server session log. It should give more
; information on the error.
;
DIST_REFRESHACL S "Error in refresh security operation for object (%s)."
;
; An error occurred during a distributed object refresh. The local replica
; or reference link could not be updated with the current acl copy from the
; master docbase.
;
; The session log (at the local server) should give more information
; on why the action failed.
;
;PARAMETERS:
; %1s - The object id of the local object.
;
;CAUSE: The local server refused the refresh request.
;ACTION: Check for previous error messages and check the server session log.
;
REFRESH_WRONGACL SSSSS "Reference security refresh failed: ACL object passed by dmcl did not match the reference mirror object. Reference id %s. ACL object name: %s, domain: %s. Mirror object name: %s, domain: %s."
;
; The refresh request failed because the acl object passed down by the client
; for the refresh did not match the mirror object in the local docbase. The
; object does not appear to be the acl object from the reference source.
;
;PARAMETERS:
; %1s - The object id of the local object.
; %2s - The acl name from the refresh acl argument.
; %3s - The acl domain from the refresh acl argument.
; %4s - The acl name in the local mirror object.
; %5s - The acl domain in the local mirror object.
;CAUSE: The source object's acl may be inconsistent, or an undetected failure
; in the refresh operation made the two look inconsistent.
;ACTION: Check the source object for consistency and retry the refresh action.
; Check the local server session log for more information.
; information on the error. If the object cannot be refreshed on
; repeated attempts, delete the copy and recreate the reference/replica.
;
PURGE_MIRROR SS "Cannot purge the replica objects for the job (%s) because %s."
;
;PARAMETERS:
; %s - replication job id
; %s - reason
;
;CAUSE: See reason.
PURGE_DANG_REF SS "Cannot purge the dangling reference objects for the job (%s) because %s."
;
;PARAMETERS:
; %s - replication job id
; %s - reason
;
;CAUSE: See reason.
PURGE_REF_OBJ S "Cannot purge the replica objects because %s."
;
;PARAMETERS:
; %s - reason
;
;CAUSE: See reason.
CHECKPOINT_ERROR "An error occurred attempting to commit the work completed so far during a set of reference objects operation. Either the outstanding transaction could not be committed or a new transaction could not be started."
;
; During a purge replica mirror or dangling reference objects cleanup operation,
; the work performed is committed periodically to
; reduce the database resources and to allow the operation to be continued
; from where it left off should a failure occur half-way through.
;
; This error is given when a that commit action fails. The failure may
; be caused by an error in the commit or the inability to start a new
; transaction following the commit.
;
;CAUSE: Possibly the underlying database system ran out of some resource.
;ACTION: Review the error log for other errors.
;
OPEN_TRANSACTION "The reference object operation cannot be executed while inside of a user transaction."
;
; A purge replica mirror or reference cleanup operation needs to start
; its own internal transaction so that it
; can control when periodic commits are done to free database resources.
;
; It cannot be executed while a user transaction is in progress.
;
;CAUSE: The user session which requested the reference object operation
; has a currently outstanding transaction open.
;ACTION: Complete the current transaction and retry.
;
SOURCE_AMBIGUOUS SS "The requested source object (%s) does not specify a unique object in docbase %s."
;
; The creation of a reference object failed because the requested object name
; matched more than one object in the source docbase.
;
;PARAMETERS:
; %1s - the requested object name and path
; %2s - the referenced docbase name
;CAUSE: The requested object name was ambiguous.
;ACTION: Create the object reference by id to get the desired object.
;
COULD_NOT_CONNECT S "Distributed Operation failed because a connection could not be established to docbase %s."
;
; An attempt to establish a connection to another docbase failed.
; The current command could not be processed.
;
;PARAMETERS:
; %2s - the referenced docbase name
;CAUSE: The docbase could be unknown or unavailable at this time. Or the
; login attempt could have been denied.
;ACTION: Check the error log for previous errors that may indicate the exact
; reason for the connection failure. Attempt to login directly to the
; desired docbase as a diagnostic step.
;
REF_TRAN DS "Error creating reference to object %s. Could not %s transaction to create the local reference object."
;
; The creation of a reference object failed because of an error returned
; from the transaction system.
;
;PARAMETERS:
; %1s - the referenced object id.
; %2s - indicates error on transaction begin or commit.
;CAUSE: The server could not begin/commit the transaction.
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem. Check the RDBMS error logs for further indication.
;
REFRESH_TRAN DS "Error refreshing reference object %s. Could not %s transaction to update the local reference object."
;
; The refresh of a reference object failed because of an error returned
; from the transaction system.
;
;PARAMETERS:
; %1s - the reference object id.
; %2s - indicates error on transaction begin or commit.
;CAUSE: The server could not begin/commit the transaction.
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem. Check the RDBMS error logs for further indication.
;
REFERENCE_TYPE S "Cannot create a reference to an object of type %s."
;
; The request to create a new reference was rejected because the referenced
; object was of a type that cannot be referenced.
;
;PARAMETERS:
; %1s - the type of the referenced object.
;CAUSE: The referenced type is not supported in a create reference operation.
;ACTION: Modify reference request.
;
REF_CLIENT_VERSION "DMCL version must be 4.0 or higher to create a distributed reference."
;
; The request to create a new reference was rejected because the dmcl
; version was not 4.0 or higher.
;
;PARAMETERS: None
;CAUSE: The DMCL is too old.
;ACTION: The user must upgrade to a new dmcl to create reference objects.
;
REFRESH_DEEP D "A simple refresh operation on object %s could not be done because the object had relationships which were changed and also needed refreshing. A deep refresh is required on this object."
;
; The attempt to refresh a replica or reference object failed because the
; object had relationships (usually VDM children) which were modified and
; would need refreshing as well.
;
; A refresh operation can be run in two modes:
; - "deep" refresh: - the object is refreshed and all objects related
; to it are also refreshed; then all objects related
; to those are refreshed, etc.
; - "shallow" refresh: - an attempt is made to refresh only the specified
; objects and not follow all its relationships.
;
; If a shallow refresh is requested but the object's relationships are
; found to have changed, then a "deep" refresh is required.
;
;PARAMETERS:
; %1s - The object id of the local object.
;CAUSE: The object had modified relationships.
;ACTION: Request a full refresh of the object (default in refresh api).
;
REFRESH_SECURITY SD "The user (%s) does not have permission to refresh object %s."
;
; The attempt to refresh a replica or reference object failed because the
; current user does not have permission to fetch all of the required data from
; the source docbase(s).
;
;PARAMETERS:
; %s - The current user.
; %s - The object id of the local object.
;CAUSE: The user did not have permission to fetch the source object.
;ACTION: Ask the docbase aministrator to refresh the object and/or check
; the ability of the local server to access the data at the source.
;
DUMPMAP_ALLOC SL "The %s could not allocate a new entry for the refresh map. Current map size is %ld."
;
; The replica refresh operation involves building a relationship map of
; all the objects related to the one being refreshed. During the building
; of this map we were unable to allocate a new map entry. This likely
; represents a memory exhaustion.
;
;PARAMETERS:
; %s - Indicator for DMCL or Server.
; %s - The number of entries in the map before the error occurred.
;CAUSE: Likely running out of memory.
;ACTION: Check memory/swap limits.
;
ALLOC_ID ID "Could not allocate new object id for tag %d in replication of object %s."
;
; During a replication action, the system attempted to pre-allocate a local
; object id for the replica of the indicated object. The call to create
; the id failed.
;
;PARAMETERS:
; %s - the tag for which the id was requested.
; %s - the object being replicated.
;CAUSE: Could be a server failure of some kind. Unlikely, but could indicate
; an exhaustion of available id's for the indicated tag.
;ACTION: Check server/session log for error messages. Test to see if you can
; directly create a new object of the specified type.
;
DUMPMAP_SRV D "The source server was unable to properly determine the replication data for object %s."
;
; The replica refresh operation involves building a relationship map of
; all the objects related to the one being refreshed. During the building
; of this map we encountered an error that prevents the indicated object
; from being properly replicated.
;
;PARAMETERS:
; %s - The object on which the error was encountered.
;CAUSE: The source data may not be consistent.
;ACTION: Check the source object for consistency.
;
REFRESH_NOJOB DD "Could not fetch the dm_job object which defines the replication parameters for replica %s. Job id from dm_reference: %s."
;
; The replica refresh operation must fetch the dm_job object which originally
; caused the replication in order to obtain the replication options. This
; error indicates that the job object could not be fetched.
;
;PARAMETERS:
; %s - The replica object on which the error was encountered.
; %s - The object id of the job as obtained from the dm_reference
;CAUSE: The replica may no longer have a valid parent job. Or the
; dm_reference for the replica may not indicate the proper job id.
;ACTION: Check the existence of the parent dm_job for the replication task.
;
OBJECT_COPY DS "Error creating copy of object %s in order to save to local server in a refresh operation. The remote object type is %s. Check that the type definitions in the local and remote docbases are consistent."
;
; The replica refresh operation must take each modified/new object and copy
; it from the domain of the source server to the local domain. This involves
; converting it to the local type (typically just copying the attributes over).
; This error is triggered by a failure in this copy.
;
;PARAMETERS:
; %s - The replica object on which the error was encountered.
; %s - The type name of the source object.
;CAUSE: The failure may be due to a remote type being unknown in the local
; system or having a different incompatible type definition.
;ACTION: Check the consistencies of the named type in the two docbases.
;
OBJECT_REFRESH DD "Error returned from server ReplicaRefresh call on attempt to save local replica of object %s. Local object id is %s."
;PARAMETERS:
; %s - The global object id.
; %s - The object id of the local replica.
;CAUSE: The server refresh call failed.
;ACTION: Check the session log for the error message logged by the server
; which should further describe the problem.
;
REPLICA_DELETE DD "Error returned from server DESTROY_REPLICA call to destroy local replica of object %s. Local object id is %s."
;PARAMETERS:
; %s - The global object id.
; %s - The object id of the local replica.
;CAUSE: The server delete call failed.
;ACTION: Check the session log for the error message logged by the server
; which should further describe the problem.
;
RENDITION_DELETE DD "Error returned from server DESTROY_CONTENT call to destroy local rendition of object %s. Local object id is %s."
;PARAMETERS:
; %s - The global object id.
; %s - The object id of the local replica.
;CAUSE: The server destroy call failed.
;ACTION: Check the session log for the error message logged by the server
; which should further describe the problem.
;
BUILDREPMAP "Error building map of related object in replica refresh operation."
;
; The replica refresh operation must compute the set of all related objects
; and determine the state of those objects at the source and local sites.
; This error message is given when a failure is encountered during the building
; of that map. Previous error messages should give more detail on the
; error.
;
;PARAMETERS: None
;CAUSE: Failure to compute related object set.
;ACTION: Check for previous error messages which give more detail on problem.
;
MERGEREPMAP "Error building map of related object in replica refresh operation."
;
; The replica refresh operation must compute the set of all related objects
; and determine the state of those objects at the source and local sites.
; This error message is given when a failure is encountered during the building
; of that map. Previous error messages should give more detail on the
; error.
;
;PARAMETERS: None
;CAUSE: Failure to compute related object set.
;ACTION: Check for previous error messages which give more detail on problem.
;
PROCESSREPLICA SDD "Error processing replica object %s. Global object id: %s. Source id: %s."
;
; An error occurred during replica refresh as the replica object was being
; built from a copy of the source object. The error may have occurred
; in copying the object values from the source (which may indicate some
; sort of type inconsistency between the docbases) or in applying
; replication filter/remapping options. Previous errors in the log should
; indicate more about the nature of the problem.
;
;PARAMETERS:
; %s - The replica object id (NEW_OBJECT if new object).
; %s - The global object id.
; %s - The source object id (commonly the same as the global id).
;CAUSE: Failure to build new version of replica object.
;ACTION: Check for previous error messages which give more detail on problem.
;
OBJECT_IDMAP "Error in Distributed Id Mapping during object replication action."
;
; An error occurred during replica refresh as the replica object was being
; built from a copy of the source object. The error occurred during the
; actions to remap source id ptr's in the object to the appriopriate local
; object id values.
;
;PARAMETERS: None
;CAUSE: Failure to build new version of replica object.
;ACTION: Check for previous error messages which give more detail on problem.
;
REPLICA_FETCH DSS "Error in Distributed Operation due to the inibility to fetch/create the replica object with id %s. Type Name: %s. Create Flag: %s."
;
; An error occurred during replica operation because of the failure to
; fetch the indicated object from the database. If the above create flag
; is True, then the attempt was to create a new object with the specified id.
;
;PARAMETERS:
; %s - The replica object id
; %s - The type name
; %s - T if creating a new object, F otherwise
;CAUSE: Failure to fetch replica object.
;ACTION: Check for previous error messages which give more detail on problem.
;
DMREF_ALLOC "Error creating new dm_reference object."
;
; The creation of a reference object failed because of an error creating a
; new dm_reference object.
;
;PARAMETERS: none
;CAUSE: The server could not allocate a new dm_reference object
;ACTION: Check for previous errors which should give more detail on the cause
; of the problem. Check for resource usage (memory).
;
PARM SS "Error in distributed operation. Bad parameter: %s = %s."
;
; An error occurred due to a bad operational parameter. This may indicate
; a protocol error between the client and server, possibly an incompatibility
; between the server and client versions.
;
;PARAMETERS:
; %s - The parameter name.
; %s - The parameter value.
;CAUSE: Bad parameter.
;ACTION: Check for previous error message which may give more detail on the
; problem. Check the server and client versions.
;
FOLDER_MERGE D "A Replication error during computation of the new folders links for replica object %s in its target docbase."
;
; An error occurred in replication during the folder-merge processing of a
; replica object. The error could either be in the creation of a new replica
; or the refreshing of an existing one.
;
; Folder merging determines which folders the replica object should be linked
; into in the target docbase. It involves merging the attributes from the
; new replica object with any existing links in the local copy.
;
;PARAMETERS:
; %s - The replica object id.
;CAUSE: Could be a bad folder id or an inability to fetch a referenced folder.
;ACTION: Check for previous error message which may give more detail on the
; problem. Enable replication tracing to collect more information.
;
NOMAP DSD "No mapping found for object id %s in %s object %s."
;
; A replication operation that relies on finding a local mapping for a
; remote object failed. No local object could be found which maps to the
; given object id.
;
; During replication, remote objects have their id fields remapped to
; local values. When no local mapping is found, then generally the fields
; are left as-is.
;
; However, some operations are sensitive to finding a valid mapping. For
; example content transfer relies on having a local storage area and format
; object in order to store content locally.
;
;PARAMETERS:
; %s - The object id which could not be mapped.
; %s - The type name of the object which had the id pointer.
; %s - The object id of the object which had the id pointer.
;CAUSE: Could not find local mapping for id.
;ACTION: Check for existence of replica for given object. Try running
; batch-mode replication to bring over appropriate related objects.
;
PRESAVE D "Error preparing object %s for Distributed Save operation."
;
; The save of the specified object failed.
;
; A distribute save operation is one in which multiple docbases must
; be updated. Examples:
;
; updating a replica
; linking a document to remote folder
; creating a foreign relationship (eg vdm) between documents.
;
; This error message is given when an error occurs while attempting to
; determine the update requirements for the distributed save.
;
;PARAMETERS:
; %s - The object id of the local object being saved.
;CAUSE: Object update requirements could not be determined.
;ACTION: Check for previous error message which may give more detail on the
; problem.
;
SRC_FOR_UPDATE DSD "Could not fetch master object %s from docbase %s. Unable to update replica object %s."
;
; The save of the specified object failed because of the inability to
; fetch the replica's source object.
;
; The error could have been caused by an internal error or by the non-existence
; of the master object.
;
;PARAMETERS:
; %s - The object id of the source object.
; %s - The source docbase.
; %s - The local replica object id.
;CAUSE: Object could not be fetched.
;ACTION: Check for previous error message which may give more detail on the
; problem. Check for the existence of the master object.
;
MODIFIED_MASTER DD "Could not update replica %s because its master object %s is already modified in the user's cache. Either save or revert the changes to the master object first."
;
; The save of the specified replica object failed because the master object
; was found to be modified in the user's client-side cache.
;
; During the distributed save operation, changes made to the replica object
; are moved over to the master docbase. If the master object is fetched and
; found to be modified, the operation cannot safely copy the replica changes
; into the object of unknown state.
;
;PARAMETERS:
; %s - The local replica object id.
; %s - The object id of the source object.
;CAUSE: Object was modified.
;ACTION: Revert the master object specified in the error message and retry
; the operation.
;
VERSION_MISMATCH DDLL "Replica object %s is out of date with its master object %s. Master Vstamp: %d, Replica Vstamp: %d. You must refresh the local replica before applying updates to it."
;
; The save of the specified replica object failed because the replica was
; not up-to-date with its source object.
;
;PARAMETERS:
; %s - The local replica object id.
; %s - The object id of the source object.
; %d - The master version stamp.
; %d - The replica version stamp.
;CAUSE: Object out-of-date
;ACTION: Refresh the replica object specified in the error message and retry
; the operation.
;
REP_BADCOPY DD "Error during Distributed Update operation. The attributes of replica object %s could not be copied to master object %s."
;
; The save of the specified replica object failed because the copy of changes
; from the replica to the master did not succeed.
;
;PARAMETERS:
; %s - The local replica object id.
; %s - The object id of the source object.
;CAUSE: Error in attribute copy.
;ACTION: Check for previous error message which may give more detail on the
; problem.
;
REP_BADCOPY2 D "Error during Distributed Update operation. The modified attributes of replica object %s could not be copied to temporary object prior to save to source docbase."
;
; The save of the specified replica object failed because the copy of changes
; from the replica to the master did not succeed.
;
;PARAMETERS:
; %s - The local replica object id.
;CAUSE: Error in attribute copy.
;ACTION: Check for previous error message which may give more detail on the
; problem.
;
REP_BADCOPY3 D "Error during Distributed Update operation. The local changes to replica object %s could not be reapplied following the distributed save and refresh of the local object."
;
; When a replica object is updated and the update includes both global and
; local changes, the local changes are saved in a temporary copy object
; while the master object is updated with the global changes. Following the
; master object, the local changes are re-applied to the replica and the
; replica object is saved.
;
; This save of the specified replica object failed because the copy of changes
; from a saved copy back to the local replica failed.
;
; Note that when this error is received, the master object has been updated -
; only the local attribute changes have failed. This state will be described
; by later warning messages.
;
;PARAMETERS:
; %s - The local replica object id.
;CAUSE: Error in attribute copy.
;ACTION: Check for previous error message which may give more detail on the
; problem.
;
NEW_REPLICA D "Error during Distributed Update operation. The local changes to replica object %s could not be applied due to the inability to refetch the replica object following the remote update."
;
; When a replica object is updated and the update includes both global and
; local changes, the remote changes are applied first, the replica object
; is refreshed, and then the local changes are applied.
;
; This save of the specified replica object failed because the replica could
; not be fetched following the refresh.
;
; Note that when this error is received, the master object has been updated -
; only the local attribute changes have failed. This state will be described
; by later warning messages.
;
;PARAMETERS:
; %s - The local replica object id.
;CAUSE: Error in attribute copy.
;ACTION: Check for previous error message which may give more detail on the
; problem.
;
UPDATE_NOLOCALUPD S "A distributed update to object %s was partially completed. The updates to the master object were saved correctly but an error prevented the saving of local attribute changes."
;
; The save of a replica or reference object succeeded only partially. The
; remote updates were performed and committed, but the local updates could
; not be applied.
;
; The user should attempt a manual refresh of the object (refresh api) to
; bring it up-to-date with the remote changes.
;
;PARAMETERS:
; %s - The object id of the local object.
;CAUSE: Object could not be refreshed following update.
;ACTION: Check for previous error message which may give more detail on the
; problem. Re-try the refresh by using the "refresh" operation. If
; that still fails try enabling tracing during the refresh call.
;
.severity FATAL
MAP_INIT1 "Could not create dm_docbaseid_map type. The type manager returned an error from the Store operation."
;
; During docbase initialization, the server could not create the type
; for dm_docbaseid_map. Since the server was attempting to create the
; type, the docbase must be being created or must be being upgraded from
; a pre-3.0 version. If neither of these are true then this may be the
; source of the problem.
;
;CAUSE: The type manager returned a failure from the attempt to create
; the new type.
;ACTION: Look at the error logged by the type manager.
; Report this message and any parameters to your Documentum site
; representative.
MAP_INIT2 LL "The version stamp for the dm_docbaseid_map type was %d but was expected to be %d."
;
; During docbase initialization, the version stamp for the dm_docbaseid_map
; type was found to be at an unexpected state. The version stamp is stored
; in the dmi_vstamp table with i_application = 'dm_docbaseid_map'.
;
;CAUSE: Could be running an incompatible version of the Documentum server.
;ACTION: Check the version of the server you are attempting to run to be
; sure it is compatible with the docbase. If they are consistent,
; report this message and any parameters to your Documentum site
; representative.
TYPE_INIT "Could not create dm_reference type. The type manager returned an error from the Store operation."
;
; During docbase initialization, the server could not create the type
; for dm_reference. Since the server was attempting to create the
; type, the server must be attempting to create a new docbase or to upgrade
; a docbase from a pre-4.0 version.
;
;CAUSE: The type manager returned a failure from the attempt to create
; the new type.
;ACTION: Look at the error logged by the type manager.
; Report this message and any parameters to your Documentum site
; representative.
BAD_VSTAMP LL "The version stamp for the dm_reference type was %d but was expected to be %d. You may be running a version of the Documentum server which is incompatible with the Docbase."
;
; During docbase initialization, the version stamp for the dm_reference
; type was found to be at an unexpected state. The version stamp is stored
; in the dmi_vstamp table with i_application = 'dm_reference'.
;
;PARAMETERS:
; %d - the type version stamp
; %d - the version stamp expected by the server executable
;
;CAUSE: Could be running an incompatible version of the Documentum server.
;ACTION: Check the version of the server you are attempting to run to be
; sure it is compatible with the docbase. If they are consistent,
; report this message and any parameters to your Documentum site
; representative.
TYPE_CONVERSION I "Failed to convert type dm_reference to version %d."
;
; During docbase initialization, the version stamp for the dm_reference
; type indicated that it needed to be upgraded to match the current server
; version. This upgrade procedure failed.
;
;PARAMETERS:
; %d - the type version stamp
; CAUSE: Type conversion failed.
; ACTION: Check the version of the server to make sure it is compatible with
; the current version of the docbase. Check previous errors in the
; server log file and for additional error information (if any) in
; the database error log files.
;