Freescale MPC85XX系列BSP各设备注册浅析

这几天项目不太忙,于是抽空看了一下关于BSP相关的东西,记下来跟大家分享一下。

我们公司用的产品主要是freescale公司的powerpc系列,期中MPC8548,MPC8572用的比较多。由于要给老外做整个板卡上硬件的测试工作,所以对于板上资源是必须要了解的。本篇文章的侧重点在于板上各设备是如何注册的(只讲设备注册,不讲驱动注册),而对于板上有哪些资源,datasheet上都写得明明白白,在此不再赘述。

 

好了,我们先查看一下在linux-2.6.23内核上的MPC85XX系列的板级资源文件

arch/ppc/syslib/mpc85xx_devices.c

由于文件太大,我把主要部分列出来

static struct fs_platform_info mpc85xx_fcc1_pdata = { .fs_no = fsid_fcc1, .cp_page = CPM_CR_FCC1_PAGE, .cp_block = CPM_CR_FCC1_SBLOCK, .rx_ring = 32, .tx_ring = 32, .rx_copybreak = 240, .use_napi = 0, .napi_weight = 17, .clk_mask = CMX1_CLK_MASK, .clk_route = CMX1_CLK_ROUTE, .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), .mem_offset = FCC1_MEM_OFFSET, }; static struct fs_platform_info mpc85xx_fcc2_pdata = { .fs_no = fsid_fcc2, .cp_page = CPM_CR_FCC2_PAGE, .cp_block = CPM_CR_FCC2_SBLOCK, .rx_ring = 32, .tx_ring = 32, .rx_copybreak = 240, .use_napi = 0, .napi_weight = 17, .clk_mask = CMX2_CLK_MASK, .clk_route = CMX2_CLK_ROUTE, .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), .mem_offset = FCC2_MEM_OFFSET, }; static struct fs_platform_info mpc85xx_fcc3_pdata = { .fs_no = fsid_fcc3, .cp_page = CPM_CR_FCC3_PAGE, .cp_block = CPM_CR_FCC3_SBLOCK, .rx_ring = 32, .tx_ring = 32, .rx_copybreak = 240, .use_napi = 0, .napi_weight = 17, .clk_mask = CMX3_CLK_MASK, .clk_route = CMX3_CLK_ROUTE, .clk_trx = (PC_F3RXCLK | PC_F3TXCLK), .mem_offset = FCC3_MEM_OFFSET, }; static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = 0x4500, .irq = MPC85xx_IRQ_DUART, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, }, [1] = { .mapbase = 0x4600, .irq = MPC85xx_IRQ_DUART, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, }, { }, }; struct platform_device ppc_sys_platform_devices[] = { [MPC85xx_TSEC1] = { .name = "fsl-gianfar", .id = 1, .dev.platform_data = &mpc85xx_tsec1_pdata, .num_resources = 4, .resource = (struct resource[]) { { .start = MPC85xx_ENET1_OFFSET, .end = MPC85xx_ENET1_OFFSET + MPC85xx_ENET1_SIZE - 1, .flags = IORESOURCE_MEM, }, { .name = "tx", .start = MPC85xx_IRQ_TSEC1_TX, .end = MPC85xx_IRQ_TSEC1_TX, .flags = IORESOURCE_IRQ, }, { .name = "rx", .start = MPC85xx_IRQ_TSEC1_RX, .end = MPC85xx_IRQ_TSEC1_RX, .flags = IORESOURCE_IRQ, }, { .name = "error", .start = MPC85xx_IRQ_TSEC1_ERROR, .end = MPC85xx_IRQ_TSEC1_ERROR, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_TSEC2] = { .name = "fsl-gianfar", .id = 2, .dev.platform_data = &mpc85xx_tsec2_pdata, .num_resources = 4, .resource = (struct resource[]) { { .start = MPC85xx_ENET2_OFFSET, .end = MPC85xx_ENET2_OFFSET + MPC85xx_ENET2_SIZE - 1, .flags = IORESOURCE_MEM, }, { .name = "tx", .start = MPC85xx_IRQ_TSEC2_TX, .end = MPC85xx_IRQ_TSEC2_TX, .flags = IORESOURCE_IRQ, }, { .name = "rx", .start = MPC85xx_IRQ_TSEC2_RX, .end = MPC85xx_IRQ_TSEC2_RX, .flags = IORESOURCE_IRQ, }, { .name = "error", .start = MPC85xx_IRQ_TSEC2_ERROR, .end = MPC85xx_IRQ_TSEC2_ERROR, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_FEC] = { .name = "fsl-gianfar", .id = 3, .dev.platform_data = &mpc85xx_fec_pdata, .num_resources = 2, .resource = (struct resource[]) { { .start = MPC85xx_ENET3_OFFSET, .end = MPC85xx_ENET3_OFFSET + MPC85xx_ENET3_SIZE - 1, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_FEC, .end = MPC85xx_IRQ_FEC, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_IIC1] = { .name = "fsl-i2c", .id = 1, .dev.platform_data = &mpc85xx_fsl_i2c_pdata, .num_resources = 2, .resource = (struct resource[]) { { .start = MPC85xx_IIC1_OFFSET, .end = MPC85xx_IIC1_OFFSET + MPC85xx_IIC1_SIZE - 1, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_IIC1, .end = MPC85xx_IRQ_IIC1, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_DMA0] = { .name = "fsl-dma", .id = 0, .num_resources = 2, .resource = (struct resource[]) { { .start = MPC85xx_DMA0_OFFSET, .end = MPC85xx_DMA0_OFFSET + MPC85xx_DMA0_SIZE - 1, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_DMA0, .end = MPC85xx_IRQ_DMA0, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_DMA1] = { .name = "fsl-dma", .id = 1, .num_resources = 2, .resource = (struct resource[]) { { .start = MPC85xx_DMA1_OFFSET, .end = MPC85xx_DMA1_OFFSET + MPC85xx_DMA1_SIZE - 1, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_DMA1, .end = MPC85xx_IRQ_DMA1, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_DMA2] = { .name = "fsl-dma", .id = 2, .num_resources = 2, .resource = (struct resource[]) { { .start = MPC85xx_DMA2_OFFSET, .end = MPC85xx_DMA2_OFFSET + MPC85xx_DMA2_SIZE - 1, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_DMA2, .end = MPC85xx_IRQ_DMA2, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_DMA3] = { .name = "fsl-dma", .id = 3, .num_resources = 2, .resource = (struct resource[]) { { .start = MPC85xx_DMA3_OFFSET, .end = MPC85xx_DMA3_OFFSET + MPC85xx_DMA3_SIZE - 1, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_DMA3, .end = MPC85xx_IRQ_DMA3, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_DUART] = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = serial_platform_data, }, [MPC85xx_PERFMON] = { .name = "fsl-perfmon", .id = 1, .num_resources = 2, .resource = (struct resource[]) { { .start = MPC85xx_PERFMON_OFFSET, .end = MPC85xx_PERFMON_OFFSET + MPC85xx_PERFMON_SIZE - 1, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_PERFMON, .end = MPC85xx_IRQ_PERFMON, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_SEC2] = { .name = "fsl-sec2", .id = 1, .num_resources = 2, .resource = (struct resource[]) { { .start = MPC85xx_SEC2_OFFSET, .end = MPC85xx_SEC2_OFFSET + MPC85xx_SEC2_SIZE - 1, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_SEC2, .end = MPC85xx_IRQ_SEC2, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_FCC1] = { .name = "fsl-cpm-fcc", .id = 1, .num_resources = 4, .dev.platform_data = &mpc85xx_fcc1_pdata, .resource = (struct resource[]) { { .name = "fcc_regs", .start = 0x91300, .end = 0x9131F, .flags = IORESOURCE_MEM, }, { .name = "fcc_regs_c", .start = 0x91380, .end = 0x9139F, .flags = IORESOURCE_MEM, }, { .name = "fcc_pram", .start = 0x88400, .end = 0x884ff, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_FCC1, .end = SIU_INT_FCC1, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_FCC2] = { .name = "fsl-cpm-fcc", .id = 2, .num_resources = 4, .dev.platform_data = &mpc85xx_fcc2_pdata, .resource = (struct resource[]) { { .name = "fcc_regs", .start = 0x91320, .end = 0x9133F, .flags = IORESOURCE_MEM, }, { .name = "fcc_regs_c", .start = 0x913A0, .end = 0x913CF, .flags = IORESOURCE_MEM, }, { .name = "fcc_pram", .start = 0x88500, .end = 0x885ff, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_FCC2, .end = SIU_INT_FCC2, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_FCC3] = { .name = "fsl-cpm-fcc", .id = 3, .num_resources = 4, .dev.platform_data = &mpc85xx_fcc3_pdata, .resource = (struct resource[]) { { .name = "fcc_regs", .start = 0x91340, .end = 0x9135F, .flags = IORESOURCE_MEM, }, { .name = "fcc_regs_c", .start = 0x913D0, .end = 0x913FF, .flags = IORESOURCE_MEM, }, { .name = "fcc_pram", .start = 0x88600, .end = 0x886ff, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_FCC3, .end = SIU_INT_FCC3, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_I2C] = { .name = "fsl-cpm-i2c", .id = 1, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91860, .end = 0x918BF, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_I2C, .end = SIU_INT_I2C, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_SCC1] = { .name = "fsl-cpm-scc", .id = 1, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91A00, .end = 0x91A1F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_SCC1, .end = SIU_INT_SCC1, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_SCC2] = { .name = "fsl-cpm-scc", .id = 2, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91A20, .end = 0x91A3F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_SCC2, .end = SIU_INT_SCC2, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_SCC3] = { .name = "fsl-cpm-scc", .id = 3, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91A40, .end = 0x91A5F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_SCC3, .end = SIU_INT_SCC3, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_SCC4] = { .name = "fsl-cpm-scc", .id = 4, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91A60, .end = 0x91A7F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_SCC4, .end = SIU_INT_SCC4, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_SPI] = { .name = "fsl-cpm-spi", .id = 1, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91AA0, .end = 0x91AFF, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_SPI, .end = SIU_INT_SPI, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_MCC1] = { .name = "fsl-cpm-mcc", .id = 1, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91B30, .end = 0x91B3F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_MCC1, .end = SIU_INT_MCC1, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_MCC2] = { .name = "fsl-cpm-mcc", .id = 2, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91B50, .end = 0x91B5F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_MCC2, .end = SIU_INT_MCC2, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_SMC1] = { .name = "fsl-cpm-smc", .id = 1, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91A80, .end = 0x91A8F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_SMC1, .end = SIU_INT_SMC1, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_SMC2] = { .name = "fsl-cpm-smc", .id = 2, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91A90, .end = 0x91A9F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_SMC2, .end = SIU_INT_SMC2, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_CPM_USB] = { .name = "fsl-cpm-usb", .id = 2, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x91B60, .end = 0x91B7F, .flags = IORESOURCE_MEM, }, { .start = SIU_INT_USB, .end = SIU_INT_USB, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_eTSEC1] = { .name = "fsl-gianfar", .id = 1, .dev.platform_data = &mpc85xx_etsec1_pdata, .num_resources = 4, .resource = (struct resource[]) { { .start = MPC85xx_ENET1_OFFSET, .end = MPC85xx_ENET1_OFFSET + MPC85xx_ENET1_SIZE - 1, .flags = IORESOURCE_MEM, }, { .name = "tx", .start = MPC85xx_IRQ_TSEC1_TX, .end = MPC85xx_IRQ_TSEC1_TX, .flags = IORESOURCE_IRQ, }, { .name = "rx", .start = MPC85xx_IRQ_TSEC1_RX, .end = MPC85xx_IRQ_TSEC1_RX, .flags = IORESOURCE_IRQ, }, { .name = "error", .start = MPC85xx_IRQ_TSEC1_ERROR, .end = MPC85xx_IRQ_TSEC1_ERROR, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_eTSEC2] = { .name = "fsl-gianfar", .id = 2, .dev.platform_data = &mpc85xx_etsec2_pdata, .num_resources = 4, .resource = (struct resource[]) { { .start = MPC85xx_ENET2_OFFSET, .end = MPC85xx_ENET2_OFFSET + MPC85xx_ENET2_SIZE - 1, .flags = IORESOURCE_MEM, }, { .name = "tx", .start = MPC85xx_IRQ_TSEC2_TX, .end = MPC85xx_IRQ_TSEC2_TX, .flags = IORESOURCE_IRQ, }, { .name = "rx", .start = MPC85xx_IRQ_TSEC2_RX, .end = MPC85xx_IRQ_TSEC2_RX, .flags = IORESOURCE_IRQ, }, { .name = "error", .start = MPC85xx_IRQ_TSEC2_ERROR, .end = MPC85xx_IRQ_TSEC2_ERROR, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_eTSEC3] = { .name = "fsl-gianfar", .id = 3, .dev.platform_data = &mpc85xx_etsec3_pdata, .num_resources = 4, .resource = (struct resource[]) { { .start = MPC85xx_ENET3_OFFSET, .end = MPC85xx_ENET3_OFFSET + MPC85xx_ENET3_SIZE - 1, .flags = IORESOURCE_MEM, }, { .name = "tx", .start = MPC85xx_IRQ_TSEC3_TX, .end = MPC85xx_IRQ_TSEC3_TX, .flags = IORESOURCE_IRQ, }, { .name = "rx", .start = MPC85xx_IRQ_TSEC3_RX, .end = MPC85xx_IRQ_TSEC3_RX, .flags = IORESOURCE_IRQ, }, { .name = "error", .start = MPC85xx_IRQ_TSEC3_ERROR, .end = MPC85xx_IRQ_TSEC3_ERROR, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_eTSEC4] = { .name = "fsl-gianfar", .id = 4, .dev.platform_data = &mpc85xx_etsec4_pdata, .num_resources = 4, .resource = (struct resource[]) { { .start = 0x27000, .end = 0x27fff, .flags = IORESOURCE_MEM, }, { .name = "tx", .start = MPC85xx_IRQ_TSEC4_TX, .end = MPC85xx_IRQ_TSEC4_TX, .flags = IORESOURCE_IRQ, }, { .name = "rx", .start = MPC85xx_IRQ_TSEC4_RX, .end = MPC85xx_IRQ_TSEC4_RX, .flags = IORESOURCE_IRQ, }, { .name = "error", .start = MPC85xx_IRQ_TSEC4_ERROR, .end = MPC85xx_IRQ_TSEC4_ERROR, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_IIC2] = { .name = "fsl-i2c", .id = 2, .dev.platform_data = &mpc85xx_fsl_i2c2_pdata, .num_resources = 2, .resource = (struct resource[]) { { .start = 0x03100, .end = 0x031ff, .flags = IORESOURCE_MEM, }, { .start = MPC85xx_IRQ_IIC1, .end = MPC85xx_IRQ_IIC1, .flags = IORESOURCE_IRQ, }, }, }, [MPC85xx_MDIO] = { .name = "fsl-gianfar_mdio", .id = 0, .dev.platform_data = &mpc85xx_mdio_pdata, .num_resources = 1, .resource = (struct resource[]) { { .start = 0x24520, .end = 0x2453f, .flags = IORESOURCE_MEM, }, }, }, }; static int __init mach_mpc85xx_fixup(struct platform_device *pdev) { ppc_sys_fixup_mem_resource(pdev, CCSRBAR); return 0; } static int __init mach_mpc85xx_init(void) { ppc_sys_device_fixup = mach_mpc85xx_fixup; return 0; } postcore_initcall(mach_mpc85xx_init);

 

比较多啊,其实还没列完,前面还省略了一部分内容,比如串口部分。

虽然很长,其实内容都一样哈,这些板上资源被定义为平台设备,注意最后

ppc_sys_device_fixup = mach_mpc85xx_fixup;
这里ppc_sys_device_fixup 在内核中是一个全局的函数指针,大家或许已经注意到了,在ppc系列可能有很多处理器类型,这里指向了

MPC85XX系列是因为我们选择了该类型处理器。如果是在其他型号板子资源文件中肯定指向其他了。

 

好,接着看这么多的设备是怎么注册的呢,要看另一个文件

arch/ppc/syslib/ppc_sys.c

 

我只需要看该文件的最后部分

302 static int __init ppc_sys_init(void) 303 { 304 unsigned int i, dev_id, ret = 0; 305 306 BUG_ON(cur_ppc_sys_spec == NULL); 307 308 for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { 309 dev_id = cur_ppc_sys_spec->device_list[i]; 310 if ((dev_id != -1) && 311 !(cur_ppc_sys_spec->config[dev_id] & PPC_SYS_CONFIG_DISABLED)) { 312 if (ppc_sys_device_fixup != NULL) 313 ppc_sys_device_fixup(&ppc_sys_platform_devices 314 [dev_id]); 315 if (platform_device_register 316 (&ppc_sys_platform_devices[dev_id])) {//这里就是我们的板子上的device了 317 ret = 1; 318 printk(KERN_ERR 319 "unable to register device %d/n", 320 dev_id); 321 } 322 } 323 } 324 325 ppc_sys_inited = 1; 326 return ret; 327 } 328 329 subsys_initcall(ppc_sys_init);

 

然后在内核起来的时候进行注册各设备。

device向内核注册了,那么与device相关的driver什么时候注册的,driver代码在哪呢?

这些driver代码分散在drivers目录下各目录中,比如dma controller相关的driver在 drivers/dma下,

i2c controller相关的driver在drivers/i2c下。

这里以i2c controller作为例子。

各i2c controller驱动在drivers/i2c/busses/目录下,而各i2c device驱动在drivers/i2c/chips/目录下

我们要查看的i2c controller驱动文件为

drivers/i2c/busses/i2c-mpc.c

 

驱动内容很简单,就不贴出来了。主要就是一个平台设备的驱动,实现了i2c的读写,i2c device的探测,remove等功能。

然后向内核去注册这个驱动。

驱动怎么匹配设备的?

这个我就不关心了,由总线的方法去匹配。这里platform总线匹配方法很简单的。根据struct platform_device 和

struct platform_driver里面的.name域,看名字是否相同进行匹配。

 

写这篇文章主要是为了理清板级设备如何注册。这跟我们平常做设备驱动方法有点不同,我们平常做一个设备驱动,通常把注册设备和注册驱动放在一起。内核则不同,其实都一样的啦,有设备驱动模型在,总能匹配的。

你可能感兴趣的:(c,struct,list,null,平台,resources)