OpenCASCADE 6.9.1 Bug

OpenCASCADE 6.9.1（估计从6.9.0开始），使用新的屏幕选择算法，我使用6.8开发的程序，升级到6.9.1之后，使用IVTK部分模型无法选中几何元素，经过调试发现6.9.1代码有BUG，导致数据丢失，无法判断选中的元素是否在选择范围，BUG出现的文件为SelectMgr_RectangularFrustum.cxx中的函数ScaleAndTransform

NCollection_Handle<SelectMgr_BaseFrustum> SelectMgr_RectangularFrustum::ScaleAndTransform (const Standard_Integer theScaleFactor,
                                                                                           const gp_Trsf& theTrsf)
{
  Standard_ASSERT_RAISE (theScaleFactor > 0,
    "Error! Pixel tolerance for selection should be greater than zero");

  SelectMgr_RectangularFrustum* aRes = new SelectMgr_RectangularFrustum();
  const Standard_Boolean isToScale = theScaleFactor != 1;
  const Standard_Boolean isToTrsf  = theTrsf.Form() != gp_Identity;

  if (!isToScale && !isToTrsf)
return aRes ;//这里，当部分模型满足该条件，返回一个空的数据，使用该数据无法判断模型是否在区域

  aRes->myIsOrthographic = myIsOrthographic;
  SelectMgr_RectangularFrustum* aRef = this;

  if (isToScale)
  {
    aRes->myNearPickedPnt = myNearPickedPnt;
    aRes->myFarPickedPnt  = myFarPickedPnt;
    aRes->myViewRayDir    = myViewRayDir;

    const gp_Pnt2d aMinPnt (myMousePos.X() - theScaleFactor * 0.5,
                            myMousePos.Y() - theScaleFactor * 0.5);
    const gp_Pnt2d aMaxPnt (myMousePos.X() + theScaleFactor * 0.5,
                            myMousePos.Y() + theScaleFactor * 0.5);

    // recompute base frustum characteristics from scratch
    computeFrustum (aMinPnt, aMaxPnt, myBuilder, aRes->myVertices, aRes->myEdgeDirs);

    aRef = aRes;
  }

  if (isToTrsf)
  {
    aRes->myNearPickedPnt = aRef->myNearPickedPnt.Transformed (theTrsf);
    aRes->myFarPickedPnt  = aRef->myFarPickedPnt.Transformed (theTrsf);
    aRes->myViewRayDir    = aRes->myFarPickedPnt.XYZ() - aRes->myNearPickedPnt.XYZ();

      // LeftTopNear
    aRes->myVertices[0] = aRef->myVertices[0].Transformed (theTrsf);
    // LeftTopFar
    aRes->myVertices[1] = aRef->myVertices[1].Transformed (theTrsf);
    // LeftBottomNear
    aRes->myVertices[2] = aRef->myVertices[2].Transformed (theTrsf);
    // LeftBottomFar
    aRes->myVertices[3] = aRef->myVertices[3].Transformed (theTrsf);
    // RightTopNear
    aRes->myVertices[4] = aRef->myVertices[4].Transformed (theTrsf);
    // RightTopFar
    aRes->myVertices[5] = aRef->myVertices[5].Transformed (theTrsf);
    // RightBottomNear
    aRes->myVertices[6] = aRef->myVertices[6].Transformed (theTrsf);
    // RightBottomFar
    aRes->myVertices[7] = aRef->myVertices[7].Transformed (theTrsf);

    // Horizontal
    aRes->myEdgeDirs[0] = aRes->myVertices[4].XYZ() - aRes->myVertices[0].XYZ();
    // Vertical
    aRes->myEdgeDirs[1] = aRes->myVertices[2].XYZ() - aRes->myVertices[0].XYZ();
    // LeftLower
    aRes->myEdgeDirs[2] = aRes->myVertices[2].XYZ() - aRes->myVertices[3].XYZ();
    // RightLower
    aRes->myEdgeDirs[3] = aRes->myVertices[6].XYZ() - aRes->myVertices[7].XYZ();
    // LeftUpper
    aRes->myEdgeDirs[4] = aRes->myVertices[0].XYZ() - aRes->myVertices[1].XYZ();
    // RightUpper
    aRes->myEdgeDirs[5] = aRes->myVertices[4].XYZ() - aRes->myVertices[5].XYZ();
  }

  // compute frustum normals
  computeNormals (aRes->myEdgeDirs, aRes->myPlanes);

  cacheVertexProjections (aRes);

  return NCollection_Handle<SelectMgr_BaseFrustum> (aRes);
}

修改办法：

  if (!isToScale && !isToTrsf)
  {
   aRes->myPixelTolerance=myPixelTolerance;
   aRes->myIsOrthographic=myIsOrthographic;

   aRes->myBuilder= myBuilder;

   aRes->myIsOrthographic = myIsOrthographic;
   aRes->myNearPickedPnt = myNearPickedPnt;
   aRes->myFarPickedPnt = myFarPickedPnt;
   aRes->myViewRayDir = myViewRayDir;
   aRes->myMousePos = myMousePos;
  
   for (int i = 0; i <6;++i)
   {
    aRes->myPlanes[i] = myPlanes[i];
   }
   for (int i = 0; i < 6; ++i)
   {
    aRes->myVertices[i] = myVertices[i];
   }
   for (int i = 0; i < 6; ++i)
   {
    aRes->myMaxVertsProjections[i] = myMaxVertsProjections[i];
   }
   for (int i = 0; i < 6; ++i)
   {
    aRes->myMinVertsProjections[i] = myMinVertsProjections[i];
   }
   for (int i = 0; i <3; ++i)
   {
    aRes->myMaxOrthoVertsProjections[i] = myMaxOrthoVertsProjections[i];
   }
   for (int i = 0; i <3; ++i)
   {
    aRes->myMinOrthoVertsProjections[i] = myMinOrthoVertsProjections[i];
   }
   for (int i = 0; i < 6; ++i)
   {
    aRes->myEdgeDirs[i] = myEdgeDirs[i];
   }
   return NCollection_Handle<SelectMgr_BaseFrustum>(aRes);
  }