google分享的性能指标数据，作为设计参考

google分享的性能指标数据，作为设计参考

http://highscalability.com/numbers-everyone-should-know

Numbers Everyone Should Know

Wednesday, February 18, 2009 at 8:14AM

Google AppEngine Numbers

This group of numbers is from Brett Slatkin in Building Scalable Web Apps with Google App Engine.

Writes are expensive!

Datastore is transactional: writes require disk access

Disk access means disk seeks

Rule of thumb: 10ms for a disk seek

Simple math: 1s / 10ms = 100 seeks/sec maximum

Depends on:
* The size and shape of your data
* Doing work in batches (batch puts and gets)

Reads are cheap!

Reads do not need to be transactional, just consistent

Data is read from disk once, then it's easily cached

All subsequent reads come straight from memory

Rule of thumb: 250usec for 1MB of data from memory

Simple math: 1s / 250usec = 4GB/sec maximum
* For a 1MB entity, that's 4000 fetches/sec

Numbers Miscellaneous

This group of numbers is from a presentation Jeff Dean gave at a Engineering All-Hands Meeting at Google.

L1 cache reference 0.5 ns

Branch mispredict 5 ns

L2 cache reference 7 ns

Mutex lock/unlock 100 ns

Main memory reference 100 ns

Compress 1K bytes with Zippy 10,000 ns

Send 2K bytes over 1 Gbps network 20,000 ns

Read 1 MB sequentially from memory 250,000 ns

Round trip within same datacenter 500,000 ns

Disk seek 10,000,000 ns

Read 1 MB sequentially from network 10,000,000 ns

Read 1 MB sequentially from disk 30,000,000 ns

Send packet CA->Netherlands->CA 150,000,000 ns

The Lessons

Writes are 40 times more expensive than reads.

Global shared data is expensive. This is a fundamental limitation of distributed systems. The lock contention in shared heavily written objects kills performance as transactions become serialized and slow.

Architect for scaling writes.

Optimize for low write contention.

Optimize wide. Make writes as parallel as you can.

The Techniques

Keep in mind these are from a Google AppEngine perspective, but the ideas are generally applicable.

Sharded Counters

We always seem to want to keep count of things. But BigTable doesn't keep a count of entities because it's a key-value store. It's very good at getting data by keys, it's not interested in how many you have. So the job of keeping counts is shifted to you.

The naive counter implementation is to lock-read-increment-write. This is fine if there a low number of writes. But if there are frequent updates there's high contention. Given the the number of writes that can be made per second is so limited, a high write load serializes and slows down the whole process.

The solution is to shard counters. This means:

Create N counters in parallel.

Pick a shard to increment transactionally at random for each item counted.

To get the real current count sum up all the sharded counters.

Contention is reduced by 1/N. Writes have been optimized because they have been spread over the different shards. A bottleneck around shared state has been removed.

This approach seems counter-intuitive because we are used to a counter being a single incrementable variable. Reads are cheap so we replace having a single easily read counter with having to make multiple reads to recover the actual count. Frequently updated shared variables are expensive so we shard and parallelize those writes.

With a centralized database letting the database be the source of sequence numbers is doable. But to scale writes you need to partition and once you partition it becomes difficult to keep any shared state like counters. You might argue that so common a feature should be provided by GAE and I would agree 100 percent, but it's the ideas that count (pun intended).

Paging Through Comments

How can comments be stored such that they can be paged through
in roughly the order they were entered?

Under a high write load situation this is a surprisingly hard question to answer. Obviously what you want is just a counter. As a comment is made you get a sequence number and that's the order comments are displayed. But as we saw in the last section shared state like a single counter won't scale in high write environments.

A sharded counter won't work in this situation either because summing the shared counters isn't transactional. There's no way to guarantee each comment will get back the sequence number it allocated so we could have duplicates.

Searches in BigTable return data in alphabetical order. So what is needed for a key is something unique and alphabetical so when searching through comments you can go forward and backward using only keys.

A lot of paging algorithms use counts. Give me records 1-20, 21-30, etc. SQL makes this easy, but it doesn't work for BigTable. BigTable knows how to get things by keys so you must make keys that return data in the proper order.

In the grand old tradition of making unique keys we just keep appending stuff until it becomes unique. The suggested key for GAE is: time stamp + user ID + user comment ID.

Ordering by date is obvious. The good thing is getting a time stamp is a local decision, it doesn't rely on writes and is scalable. The problem is timestamps are not unique, especially with a lot of users.

So we can add the user name to the key to distinguish it from all other comments made at the same time. We already have the user name so this too is a cheap call.

Theoretically even time stamps for a single user aren't sufficient. What we need then is a sequence number for each user's comments.

And this is where the GAE solution turns into something totally unexpected. Our goal is to remove write contention so we want to parallelize writes. And we have a lot available storage so we don't have to worry about that.

With these forces in mind, the idea is to create a counter per user. When a user adds a comment it's added to a user's comment list and a sequence number is allocated. Comments are added in a transactional context on a per user basis using Entity Groups. So each comment add is guaranteed to be unique because updates in an Entity Group are serialized.

The resulting key is guaranteed unique and sorts properly in alphabetical order. When paging a query is made across entity groups using the ID index. The results will be in the correct order. Paging is a matter of getting the previous and next keys in the query for the current page. These keys can then be used to move through index.

I certainly would have never thought of this approach. The idea of keeping per user comment indexes is out there. But it cleverly follows the rules of scaling in a distributed system. Writes and reads are done in parallel and that's the goal. Write contention is removed.