JLink-Utils

PowerPC系列仿真器的价格让人望而却步，从我个人的情况来开其实只有20%的几率是在用它调试程序，大多的时候都是在烧写Bootloader，于是我利用JLink的硬件环境，实现了一个简单的Flash编程的小工具，

这样就不用再担心loader的Image被破坏了。其实类似的东西很早以前就有了，例如：Jflash-s3c2410，只是他只能烧录s3c2410

 

目前实现的功能有：

1.         菊花链扫描，判断环链上的设备

2.         BYPASS的测试，用于判断信号线连接是否正常

3.         读取Flash Chip ID

4.         将Flash指定区域的数据回显出来

5.         实现对flash的擦操作

6.         实现对flash的编程

7.         设置JLink的TCK速率

 

下面是Console Log：

 

$ ./JLinkUtils.exe         ************************************************************     **                                                        **     **         JLink Utils                                    **     **                                                        **     **         VERSION: 0.1                                   **     **         Release Date:    02/06/2010                    **     **         Build Date  :    Feb  9 2010, 21:09:11         **     **                                                        **     ************************************************************   File:[jlink.c] Line:[629] J-Link initialization started / target CPU reset initiated File:[jlink.c] Line:[822] J-Link ARM V7 compiled Apr  1 2009 12:02:10 File:[jlink.c] Line:[835] JLink caps 0x39ff7bbf File:[jlink.c] Line:[854] JLink hw version 70000 File:[jlink.c] Line:[870] JLink max mem block 9120 File:[jlink.c] Line:[783] Vref = 2.866 TCK = 1 TDI = 1 TDO = 0 TMS = 0 SRST = 0 TRST = 0   File:[jlink.c] Line:[642] J-Link JTAG Interface ready File:[jlink.c] Line:[728] trst: 0, srst: 0 File:[jlink.c] Line:[233] File:[jlink.c] Line:[585] [Jerry debug] Set JCK to : 12000kHz JLinkUtils-0.1$ JLinkUtils-0.1$ jlink init    jlink device init speed   Set Jlink TCK Speed dcScan  Scan Daisy chain bypass  BYPASS Test JLinkUtils-0.1$ jlink dcScan Found Chip [MPC8247] JLinkUtils-0.1$ jlink bypass BYPASS Test Passed! Read Back [0x55555554] JLinkUtils-0.1$ flash readId   Read Flash Vendor and Device ID dump     Dump a buffer from flash address erase    Erase Flash by sectors program  Program Flash JLinkUtils-0.1$ flash JLinkUtils-0.1$ flash > readId BdType = System Control Board Global variables updated. Use file [./data/pq27e_a.bsdl] to init BSR... Done Filling array... Done Manufacturer code Correct: [0xBF] Device code Correct: [0xD7] JLinkUtils-0.1$ flash dump 520192 128 BdType = System Control Board Global variables updated. Use file [./data/pq27e_a.bsdl] to init BSR... Done Filling array... Done 00000000: 66746f6d 30286363 6829302c 3a74736f    motfcc(0,0)host: 00000010: 6f777876 2e736b72 3d65205a 2e323931    vxworks.Z e=192. 00000020: 2e383631 30322e31 66663a30 66666666    168.1.200:ffffff 00000030: 68203030 3239313d 3836312e 332e312e    00 h=192.168.1.3 00000040: 313d6720 312e3239 312e3836 7520312e     g=192.168.1.1 u 00000050: 6d73633d 3d777020 316d7363 74203332    =csm pw=csm123 t 00000060: 53433d6e 2041314d 006c3d6f ffffffff    n=CSM1A o=l..... 00000070: ffffffff ffffffff ffffffff ffffffff    ................ JLinkUtils-0.1$ flash> erase 0 127 BdType = System Control Board Global variables updated. Use file [./data/pq27e_a.bsdl] to init BSR... Done Filling array... Done Flash Erase [0:127] Done JLinkUtils-0.1$ flash> program u-boot.bin BdType = System Control Board Global variables updated. Use file [./data/pq27e_a.bsdl] to init BSR... Done Filling array... Done Start Program flash offset addr 0x0, dataLen 0x431ac flashProgram Done! 274860 bytes data write JLinkUtils-0.1$ flash> /q JLinkUtils-0.1$ Bye