因为项目需求,需要为Rails view添加cache。首先我们来说说Rails常用的cache方法:
Rails的Cache分四种:
1,Page Cache - Fastest
2,Action Cache - Next Fastest
3,Fragment Cache - Least Fastest
4,ActiveRecord Cache - Only available in Edge Rails
1. 页面缓存
开发时使用page cache首先要设置好config/environments/development.rb:
- config.action_controller.perform_caching = true
而production环境下默认是开启cache功能的
Page Cache是Rails中最快的cache机制,使用Page Cache的前提一般为:
1,需要cache的page对所有用户一致
2,需要cache的page对public可访问,不需要authentication
在你的controller中添加 caches_page :"action_name" 。 这种cache速度快,可以节省很多时间,但是所有的visitor都能看到你的data,无需验证。
至于清除缓存,可以使用sweeper。首先编辑config/environment.rb:
- Rails::Initializer.run do |config|
- # ...
- config.load_paths += %w(#{RAILS_ROOT}/app/sweepers)
- # ...
这告诉Rails加载#{RAILS_ROOT}/app/sweepers目录下的文件
我们为BlogController定义app/sweepers/blog_sweeper.rb:
- class BlogSweeper < ActionController::Caching::Sweeper
- observe Post # This sweeper is going to keep an eye on the Post model
-
- # If our sweeper detects that a Post was created call this
- def after_create(post)
- expire_cache_for(post)
- end
-
- # If our sweeper detects that a Post was updated call this
- def after_update(post)
- expire_cache_for(post)
- end
-
- # If our sweeper detects that a Post was deletedcall this
- def after_destroy(post)
- expire_cache_for(post)
- end
-
- private
- def expire_cache_for(record)
- # Expire the list page now that we posted a new blog entry
- expire_page(:controller => 'blog', :action => 'list')
-
- # Also expire the show page, in case we just edit a blog entry
- expire_page(:controller => 'blog', :action => 'show', :id => record.id)
- end
- end
然后我们在BlogController里加上该sweeper即可:
- class BlogController < ApplicationController
- caches_page :list, :show
- cache_sweeper :blog_sweeper, \:only => [:create, :update, :destroy]
- # ...
- end
我们可以配置cache的静态html文件的存放位置,这在config/environment.rb里设置:
- config.action_controller.page_cache_directory = RAILS_ROOT + "/public/cache/"
然后我们设置Apache/Lighttpd对于静态html文件render时不接触Rails server即可
所以Page Cache就是最快的Cache,因为它不与Rails server打交道,直接load静态html。
2. Action Cache
Action Cache相关的helper方法是caches_action和expire_action,其他基本和Page Cache一样
另外我们还可以运行rake tmp:cache:clear来清空所有的Action Cache和Fragment Cache
- class BlogController < ApplicationController
- before_filter :authentication
- caches_action :list, :show
- cache_sweeper :blog_sweeper, \:only => [:create, :update, :destroy]
如上代码所示,我们将authentication这个filter放在caches_action之前声明,这样我们的Action Cache在执行之前会先访问authentication方法
这样可以弥补Page Cache不能对需要登录认证的Page进行Cache的缺点
生成的cache文件为tmp/cache/localhost:3000/blog/list.cache,这样对不同subdomain的访问页面可以cache到不同的目录
由于每次访问Action Cache时都需要与Rails server打交道,并且要先运行filters,所以比Page Cache的效率稍低 。
3. 片段缓存
这个也是我实际在项目中用到的。首先介绍基本信息:
Fragment Cache用于处理rhtml页面中的部分需要cache的模块,如app/views/blog/list.rhtml:
- <strong>My Blog Posts</strong>
- <% cache do %>
- <ul>
- <% for post in @posts %>
- <li><%= link_to post.title, :controller => 'blog', :action => 'show', :id => post %></li>
- <% end %>
- </ul>
- <% end %>
生成的cache文件为/tmp/cache/localhost:3000/blog/list.cache
我们需要在BlogController的list方法里加上一行判断,如果是读取Fragment Cache,则不必再查询一次数据库:
- def list
- unless read_fragment({})
- @post = Post.find(:all, \:order => 'created_on desc', :limit => 10)
- end
- end
Fragment分页时的Cache:
- def list
- unless read_fragment({:page => params[:page] || 1}) # Add the page param to the cache naming
- @post_pages, @post = paginate :posts, :per_page => 10
- end
- end
rhtml页面也需要改写:
- <% cache ({:page => params[:page] || 1}) do %>
- ... All of the html to display the posts ...
- <% end %>
生成的cahce文件为/tmp/cache/localhost:3000/blog/list.page=1.cache
从分页的Fragment Cache可以看出,Fragment Cache可以添加类似名字空间的东西,用于区分同一rhtml页面的不同Fragment Cache,如:
- cache ("turkey") => "/tmp/cache/turkey.cache"
- cache (:controller => 'blog', :action => 'show', :id => 1) => "/tmp/cache/localhost:3000/blog/show/1.cache"
- cache ("blog/recent_posts") => "/tmp/cache/blog/recent_posts.cache"
- cache ("#{request.host_with_port}/blog/recent_posts") => "/tmp/cache/localhost:3000/blog/recent_posts.cache"
清除Fragment Cache的例子:
- expire_fragment(:controller => 'blog', :action => 'list', :page => 1)
- expire_fragment(%r{blog/list.*})
四、ActiveRecord Cache
Rails Edge中ActiveRecord已经默认使用SQl Query Cache,对于同一action里面同一sql语句的数据库操作会使用cache
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
重要的在这里!!
在我的项目里片段缓存是和redis服务器配合工作的,关于redis的介绍在我另一篇博客里。这里重点讲他们如何配合使用。我的每个cache都有一个唯一的key来标识,并且设置了过期时间。这里我要强调下key的重要性,如果你key用得好,那么cache的其他参数就不必劳神设置了,这是一个非常聪明,有技巧的东西。