netsnmp 安装与配置

 

net-snmp installation and configuration

Recently I spent much time to learn SNMP to try to setup a snmp server for the developers. The following is the steps of installation and configuration of net-snmp, a popular and open source snmp server and agent .

http://www.myfaq.com.cn/2005September/2005-09-13/208338.html

DOWNLOAD AND INSTALL

1.download the source.
http://sourceforge.net/projects/net-snmp
or the official web: http://www.net-snmp.org/

2.Extract the packet.
tar -zxvf net-snmp-5.4.tar.gz

3.Compile the packet.
cd net-snmp-5.4
./configure (for example ./configure --with-mib-modules="agentx")
make
make test
make install

4.Copy the example configure file
cp EXAMPLE.conf /usr/local/share/snmp/snmpd.conf

5.Modify the configure file as following
Change the COMMUNITY to democommunity which is a community string

6.check the process of snmpd and kill it and then run it
ps -A | grep snmp kill xxxx snmpd -d -L

7.have a try.
snmpget -v 1 -c democommunity localhost system.sysUpTime.0

INSTALL A MIB

1. A mibs file like JM-TEST-1-MIB.txt. the following is the content.

JM-TEST-1-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, 
        OBJECT-TYPE, 
        INTEGER 
                FROM SNMPv2-SMI;

jmtest MODULE-IDENTITY
    LAST-UPDATED "200203210000Z"
    ORGANIZATION "Temple U"
    CONTACT-INFO
        "None yet."
    DESCRIPTION
        "AgentX testing MIB"
    REVISION     "200203210000Z"
    DESCRIPTION
        "None yet."
    ::= { experimental 72}

firstKey OBJECT-TYPE
    SYNTAX      INTEGER (0..100)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Value initialized to 0 and on each 
         access:
         - Return current val.
         - increment"

    ::= { jmtest 1 }

END

2.Copy the mib file to the correct locations
cp JM-TEST-1-MIB.txt /usr/local/share/snmp/mibs

3.Let the snmp tools to recognize the mibs
echo "mibs +JM-TEST-1-MIB" >> /usr/local/share/snmp/snmp.conf

4.Use the snmptranslate to verify if the mib is loaded.
snmptranslate -IR -Tp experimental
and should get the following show:

Unlinked OID in JM-TEST-1-MIB: jmtest ::= { experimental 72 }
+--experimental(3)
|
+--jmtest(72)
+-- -RW- INTEGER firstKey(1)
Range: 0..100

http://net-snmp.cn/snmp/32.html