netstat 用法详细资料--英文版本

    google到的一份详细的netstat资料,可惜是英文版本,先保存下来慢慢细看,有时间再翻译出一个中文版本来.

原文地址: http://ibgwww.colorado.edu/~lessem/psyc5112/usail/man/linux/netstat.8.html

netstat - Display active network connections

SYNOPSIS
netstat [[-a | [-t | -u | -w]] [-n | -o] | -x] [-c]

netstat -i [-a] [-c]

netstat -r [-c] [-n]

netstat -v

DESCRIPTION

Netstat  displays  the  status  of  network connections on either TCP, UDP, RAW 

or UNIX sockets  to  the  system.  By default,  netstat  only  displays status 

on active socketswhich are not in the LISTEN  state  (i.e.  connections  to
active  processes). To obtain information about the kernel routing table, 

netstat may be invoked with the option -r

Netstat's display includes the following  information  for each socket:

Proto
The protocol (either TCP or UDP) used by the socket.

Recv-Q
The  count  of  bytes  not copied by the user program connected to this socket.

Send-Q
The count of bytes not acknoledged by the remote host.

Local Address
The local address (local hostname) and port number of  the

socket.  Unless the -n switch is given, the socket address

is resolved to its canonical hostname, and the port number
is translated into the corresponding service name.

Foreign Address
The remote address (remote hostname) and port number of he
socket. As with the  local  address:port,  the  -n  switch
turns off hostname and service name resolution.

(State)

The  state of the socket. Since there are no states in RAW
and usually no states used in UDP, this row  may  be  left


ESTABLISHED
The socket has an established connection.

SYN_SENT
The  socket  is  actively attempting to establish a connection.

SYN_RECV
The connection is being initialized.

FIN_WAIT1
The socket is closed, and the connection  is  shutting down.

FIN_WAIT2
Connection is closed, and the socket is waiting for a shutdown from the remote end.

TIME_WAIT
The socket is waiting after close for remote  shutdown retransmission.

CLOSED 

The socket is not being used.

CLOSE_WAIT
The  remote  end  has  shut  down,  waiting for the socket to close.

LAST_ACK
The remote end shut down, and the socket is closed.
Waiting for acknowledgement.

LISTEN 

The socket is listening for incoming connections.

CLOSING
Both  sockets are shut down but we still don't have

all our data sent.

UNKNOWN
The state of the socket is unknown.

If netstat is invoked with  the  option  -o  ,  additional
information  will  be  displayed  behind  the  state info.
These informations are shown like this: "rx-retransmission
byte  count"  "tx-retransmission byte count" "timer state"
"(time/backoff)". Timer state may now be either on or off.
The  time (in seconds) being displayed is how long it will
take the timer to expire. All these options are subject to
be removed in later releases of the NET software.

Being  invoked with the option -x , netstat displys a list
Netstat's display includes the following  information  for
each socket:

Proto
The protocol (usually unix) used by the socket.

RefCnt
The  reference  count  (i.e.  attached  processes via this
socket).

Flags
The only displayed flag is SO_ACCEPTON (displayed as  ACC)
otherwise  left blank. SO_ACCECPTON is used on unconnected
sockets if their corresponding processes are waiting for a
connect  request. The other flags are not of normal inter-
est and not displayed.

Type
There are several types of socket access:

SOCK_DGRAM
The socket is  used  in  Datagram  (connectionless) mode.

SOCK_STREAM
This is a stream (connection) socket.

SOCK_RAW
The socket is used as a raw socket.

SOCK_RDM
This one serves reliably-delivered messages.

SOCK_SEQPACKET
This is a sequential packet socket.

SOCK_PACKET
RAW interface access socket.

UNKNOWN
Who  ever  knows,  what  the future will bring us just fill in here :-)

State
This field will contain one of the following Keywords:

LISTENING
The socket is listening for a connection request.

UNCONNECTED
The socket is not connected to another one.

CONNECTING
The socket is about to establish a connection.

CONNECTED
The socket is connected.

DISCONNECTING
The socket is disconnecting.

UNKNOWN
This state should never happen.

Path
This displays the path name  as  which  the  corresponding
processes attached to the socket.

The network routing table (invoked with netstat -r ) shows
up the following information:

Destination net/address
The destination adress of a resolved host or  hand-entered
network  is displayed.  Unless the option -n is given, the
hosts or nets are resolved. An entry named "default" shows
up the default route for the kernel.

Gateway address

If there is no Asterisk ('*') displayed - any data will be
routed to the dedicated gateway.

Flags

Possible routeing flags are:
U      This route is useable
G      Destination is a gateway
H      Destination is a Host entry
R      Route will be reinstated after time-out
D      This one is created dynamically (by redirection)
M      This one is modified dynamically (by redirection)

RefCnt

Use
How many times this route was used yet

Iface
This is the  name  of  the  Interface,  where  this  route
belongs to The  device  statistics  table  (invoked with netstat -i )
displays information about the interfaces:

Iface
The name this interface.

MTU
Maximum size for  transmission  on  this  interface.  This
should  be  the size of data transferred on this interface
without interface specific headers.

RX-OK
error free received packets for this interface.

RX-ERR
buggy received packets.

RX-DRP
dropped received packets (due to memory lack ?).

RX-OVR
packets that we were unable to receive that fast way.

TX-OK
error free transmitted packets for this interface.

TX-ERR
buggy transmitted packets.

TX-DRP
dropped transmitteded packets.

TX-OVR
packets that we were unable to transmit.

Flags

The following flags may occur on the given interfaces:
A      This interface will receive all Multicast adresses.
B      Broadcasts are ok here.
D      Debugging is turned on..
M      all packets are received (Promisc-Mode).
N      Trailers are avoided.
O      No Addres Resolution Protocol on this Interface.
P      Interface is a Point-to-Point connection.
R      Interface is running.
U      Interface is up.
Options

-a     Display  information  about  all  internet sockets,
i.e. TCP, UDP, RAW and UNIX including those sockets
that are listening only.

-i     Show network devices statistics.
-c     Generate  a  continuous  listing of network status:
network status is displayed every second until  the
program is interrupted.

-n     Causes netstat not to resolve hostnames and service
names when displaying remote and local address  and
port information.

-o     Display  timer states, expiration times and backoff state.
-r     Display kernel routing table.
-t     Display information about TCP sockets only, including those that are listening.
-u     Display information about UDP sockets only.
-v     Print version information.
-w     Display information about raw sockets.
-x     Display information about UNIX domain sockets.

FILES

/etc/services -- The services translation file
/proc/net/socket -- devices information
/proc/net/raw -- RAW socket information
/proc/net/tcp -- TCP socket information
/proc/net/udp -- UDP socket information
/proc/net/unix -- Unix domain socket information

BUGS

Occasionally  strange  information  may appear if a socket
changes as it is viewed. This is unlikely to occur.

AUTHORS

The netstat user interface was written by Fred  Baumgarten
<[email protected]> the man page basically
by Matt Welsh <[email protected]>. It was updated by Alan
Cox  <[email protected]>  but  could  do  with a bit more
work.