ABB机器人与PC计算机控制口连接 超级终端 命令清单
条件：
9 针串口通信 RS232。
PC 启动超级终端软件。Windows -> Start -> Accessories -> Terminal
通信设置：
2. 1 个停止位 没有奇偶校验
3. 没有 Modern 采用直接串口连接
4. 使用 Xon/Xoff 通信形式
当故障发生时，PC 必须与机器人联通，保存错误信息，用来进行故障分析。
免费下载超级终端软件：
http://hp.vector.co.jp/authors/VA002416/teraterm.html
控制口常用命令清单
Common
cd( ) change the default directory. ( e.g. -> cd "/hd0a/mysystem/syspar" )
check Stack( ) print a summary of each task's stack usage.
i( ) print a summary of each task's TCB, task by task.
ls( ) list the contents of a directory.
memShow( ) show system memory partition blocks and statistics.
pwd( ) display the current default directory.
version( ) print VxWorks version information.
copy( ) copy in ( or stdin ) to out ( or stdout ).( e.g. -> copy "eio.cfg","neweio.cfg" )
ll( ) do a long listing of directory contents.
mkdir( ) make a directory.
rmdir( ) remove a directory.
rm( ) remove a file. ( e.g. -> rm "eio.cfg" )
devs( ) ist all system-known devices.
reboot reset and warm start the system.
safspv_ show display LM78 system monitor + SMBus registers.
pf_ac_interrupt a simulated power off. ( like reboot )
"q" - "a" before power on the system, press "q" ,waiting till display then press "a". start system into X-start interface.
BootsupROreset removes the writeprotection. ( e.g. ->BootsupROreset "<filename or directory path>" )
dbgCan_help
dbgCan_init() Inittiate CAN debug, Msgcnt = 0.
dbgCan_start() Start CAN debug.
dbgCan_stop() Stop CAN debug.
dbgCan_logCreate(noOfMsg) Create a log buffer for a number of messages.
dbgCan_logDelete() Delete ( free ) the log buffer.
dbgCan_logInit() Initiate the log buffer before use.
dbgCan_logAll() All messages are logged.
dbgCan_logIn() Only messages to the robot are logged.
dbgCan_logOut() Only messages from the robot are logged.
dbgCan_logAdr(adr) Only messages with the macId = adr are.
Logged
dbgCan_logAdrData(adr,dir,dataByteIndex,dataByteMask,dataByteValue)
Only messages with the following are logged.
adr = macId.
dir = direction.
1 = To robot.
2 = From Robot.
Bits = datamask are check and can-data-value[dataByteIndex].
( 0-7 ) = dataByteValue.
dbgCan_logAdrDataChange(adr,dir,dataByteIndex,dataByteMask,dataByteValue)
Same as above except it is only logged when changed.
dbgCan_logTriggMinPeriod(min,period,postperiod)Start
/Setup of trigg (stop of trace to buffer)
Trigg is defined as:
If ( number of can-messages < min during the period ) Then
wait number of postperiod before stop log.
min = Number of can messages.
period = Time period to calculate can messages (ms).
postperiod = Number of periods to wait before stop.
dbgCan_logTriggStop()
Stop trigg.
dbgCan_showLogStat(no,period)
Showing no of messages logged during a timeperiod.
no = Number of time to show.
period = Time interval between displaying statistics.
dbgCan_showLogDataByte()
Show log buffer,byte messages, start with the oldest messages.
dbgCan_showLogRev()
Show log buffer,decoded messages, start with the oldest messages
dbgCan_showLog()
Show log buffer, decoded messages, start with the latest messages.
dbgCan_showGtime()
Show gtime value, value in us.
dbgCan_showStop()
Stop displaying.
dbgCan_info()
Display of local debug variables.