VS2005 wince6.0 environment

Microsoft Windows XP Professional

一、安装VS2005
1.D:\VS2005\VSTS\vs\Setup\setup.exe
安装路径
D:\Program Files\Microsoft Visual Studio 8\
custom自定义安装 
去掉Visual J# 
Microsoft SQL server2005
2.安装完成后打sp1的补钉
D:\VS2005\VSTS\sp1\VS80sp1-KB926601-X86-ENU.exe
WINCE 6.0 的PlatformBuilder作为VS2005的插件，以后建立和定制WinCE操作
系统内核、编译调试应用程序将全部在VS2005里完成 
3.安装MSDN
D:\VS2005\VSTS\msdn\setup.exe
二、安装Windows Embedded CE6.0
1. 安装Wince6.0
wince6.0/Windows Embedded CE 6.0.msi
选择ARMV4I
安装目录为D:\WINCE600\
选择CE6.0 Tools
安装在D:\Program Files\Microsoft Platform Builder\6.00\
2.为wince6.0打补钉
1)Windows.Embedded.CE.6.0.Platform.Builder.Service.Pack.1.msi
2)安装R2补钉
wince6.0_r2/setup.exe
无需改设置直接安装
3)安装R3补钉
wince6.0_r3/Windows Embedded CE 6.0 R3.msi
4)安装wince6.0 update 09.10补钉
WinCEPB60-091231-Product-Update-Rollup-Armv4I.msi
WinCEPB60-101231-Product-Update-Rollup-Armv4I.msi
3.安装NETCFSetupv35.msi
5.安装ActiveSync 4.5.msi
安装到
D:\Program Files\Microsoft ActiveSync\
三、build
1. run BSP_WINCE_ARM_A8_01_02_00_Source.exe
2.打开bsp工程 Vs2005  File->open->Project
D:\WINCE600\OSDesigns\AM35x_OSDesign\AM35x_OSDesign.sln
选择AM35x_BSP_ARMV4I_Release
3.编译
Build->Advanced Build Commands->Clean Sysgen
4.WinCE源码路径
1)XLDR /WINCE600/PLATFORM/AM35X_BSP/SRC/BOOTLOADER/XLDR
2)EBOOT  /WINCE600/PLATFORM/AM35X_BSP/SRC/BOOTLOADER/EBOOT
3)DRIVER /WINCE600/PLATFORM/AM35X_BSP/SRC/DRIVERS
5.编译error
error C2220: warning treated as error - no 'object' file generated
这是因为有很多警告性错误将
D:\WINCE600\PLATFORM\COMMON\sources.cmn
D:\WINCE600\PUBLIC\COMMON\sources.cmn
D:\WINCE600\PLATFORM\AM35x_BSP\sources.cmn
下的WARNISERROR=1去掉#WARNISERROR=1
D:\WINCE600\PLATFORM\AM35x_BSP\sources.cmn下的WARNLEVEL级别改为0
WARNLEVEL=0