adb help

Android Debug Bridge

ADB QUICKVIEW

• Manage the state of an emulator or device
• Run shell commands on a device
• Manage port forwarding on an emulator or device
• Copy files to/from an emulator or device

IN THIS DOCUMENT

1. Issuing ADB Commands
2. Querying for Emulator/Device Instances
3. Directing Commands to a Specific Emulator/Device Instance
4. Installing an Application
5. Forwarding Ports
6. Copying Files to or from an Emulator/Device Instance
7. Listing of adb Commands
8. Issuing Shell Commands
9. Enabling Logcat Logging
10. Stopping the adb Server

SEE ALSO

1. Emulator

Android Debug Bridge (adb) is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device. It is a client-server program that includes three components:

• A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
• A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
• A daemon, which runs as a background process on each emulator or device instance.

You can find the adb tool in <sdk>/platform-tools/.

When you start an adb client, the client first checks whether there is an adb server process already running. If there isn't, it starts the server process. When the server starts, it binds to local TCP port 5037 and listens for commands sent from adb clients—all adb clients use port 5037 to communicate with the adb server.

The server then sets up connections to all running emulator/device instances. It locates emulator/device instances by scanning odd-numbered ports in the range 5555 to 5585, the range used by emulators/devices. Where the server finds an adb daemon, it sets up a connection to that port. Note that each emulator/device instance acquires a pair of sequential ports — an even-numbered port for console connections and an odd-numbered port for adb connections. For example:

Emulator 1, console: 5554
Emulator 1, adb: 5555
Emulator 2, console: 5556
Emulator 2, adb: 5557 ...

As shown, the emulator instance connected to adb on port 5555 is the same as the instance whose console listens on port 5554.

Once the server has set up connections to all emulator instances, you can use adb commands to control and access those instances. Because the server manages connections to emulator/device instances and handles commands from multiple adb clients, you can control any emulator/device instance from any client (or from a script).

The sections below describe the commands that you can use to access adb capabilities and manage the state of an emulator/device. Note that if you are developing Android applications in Eclipse and have installed the ADT plugin, you do not need to access adb from the command line. The ADT plugin provides a transparent integration of adb into the Eclipse IDE. However, you can still use adb directly as necessary, such as for debugging.

Issuing adb Commands

You can issue adb commands from a command line on your development machine or from a script. The usage is:

adb [-d|-e|-s <serialNumber>] <command> 

When you issue a command, the program invokes an adb client. The client is not specifically associated with any emulator instance, so if multiple emulators/devices are running, you need to use the -d option to specify the target instance to which the command should be directed. For more information about using this option, see Directing Commands to a Specific Emulator/Device Instance.

Querying for Emulator/Device Instances

Before issuing adb commands, it is helpful to know what emulator/device instances are connected to the adb server. You can generate a list of attached emulators/devices using the devices command:

adb devices

In response, adb prints this status information for each instance:

• Serial number — A string created by adb to uniquely identify an emulator/device instance by its console port number. The format of the serial number is <type>-<consolePort>. Here's an example serial number: emulator-5554
• State — The connection state of the instance. Three states are supported:
  • offline — the instance is not connected to adb or is not responding.
  • device — the instance is now connected to the adb server. Note that this state does not imply that the Android system is fully booted and operational, since the instance connects to adb while the system is still booting. However, after boot-up, this is the normal operational state of an emulator/device instance.

The output for each instance is formatted like this:

[serialNumber] [state]

Here's an example showing the devices command and its output:

$ adb devices
List of devices attached 
emulator-5554  device
emulator-5556  device
emulator-5558  device

If there is no emulator/device running, adb returns no device.

Directing Commands to a Specific Emulator/Device Instance

If multiple emulator/device instances are running, you need to specify a target instance when issuing adb commands. To so so, use the -s option in the commands. The usage for the -s option is:

adb -s <serialNumber> <command> 

As shown, you specify the target instance for a command using its adb-assigned serial number. You can use the devicescommand to obtain the serial numbers of running emulator/device instances.

Here is an example:

adb -s emulator-5556 install helloWorld.apk

Note that, if you issue a command without specifying a target emulator/device instance using -s, adb generates an error.

Installing an Application

You can use adb to copy an application from your development computer and install it on an emulator/device instance. To do so, use the install command. With the command, you must specify the path to the .apk file that you want to install:

adb install <path_to_apk>

For more information about how to create an .apk file that you can install on an emulator/device instance, see Building and Running

Note that, if you are using the Eclipse IDE and have the ADT plugin installed, you do not need to use adb (or aapt) directly to install your application on the emulator/device. Instead, the ADT plugin handles the packaging and installation of the application for you.

Forwarding Ports

You can use the forward command to set up arbitrary port forwarding — forwarding of requests on a specific host port to a different port on an emulator/device instance. Here's how you would set up forwarding of host port 6100 to emulator/device port 7100:

adb forward tcp:6100 tcp:7100

You can also use adb to set up forwarding to named abstract UNIX domain sockets, as illustrated here:

adb forward tcp:6100 local:logd 

Copying Files to or from an Emulator/Device Instance

You can use the adb commands pull and push to copy files to and from an emulator/device instance's data file. Unlike the install command, which only copies an .apk file to a specific location, the pull and push commands let you copy arbitrary directories and files to any location in an emulator/device instance.

To copy a file or directory (recursively) from the emulator or device, use

adb pull <remote> <local>

To copy a file or directory (recursively) to the emulator or device, use

adb push <local> <remote>

In the commands, <local> and <remote> refer to the paths to the target files/directory on your development machine (local) and on the emulator/device instance (remote).

Here's an example:

adb push foo.txt /sdcard/foo.txt

Listing of adb Commands

The table below lists all of the supported adb commands and explains their meaning and usage.

Category	Command	Description	Comments
Options	-d	Direct an adb command to the only attached USB device.	Returns an error if more than one USB device is attached.
	-e	Direct an adb command to the only running emulator instance.	Returns an error if more than one emulator instance is running.
	-s <serialNumber>	Direct an adb command a specific emulator/device instance, referred to by its adb-assigned serial number (such as "emulator-5556").	If not specified, adb generates an error.
General	devices	Prints a list of all attached emulator/device instances.	See Querying for Emulator/Device Instances for more information.
	help	Prints a list of supported adb commands.
	version	Prints the adb version number.
Debug	logcat [<option>] [<filter-specs>]	Prints log data to the screen.
	bugreport	Prints dumpsys, dumpstate, andlogcat data to the screen, for the purposes of bug reporting.
	jdwp	Prints a list of available JDWP processes on a given device.	You can use the forward jdwp:<pid> port-forwarding specification to connect to a specific JDWP process. For example:  adb forward tcp:8000 jdwp:472 jdb -attach localhost:8000
Data	install <path-to-apk>	Pushes an Android application (specified as a full path to an .apk file) to the data file of an emulator/device.
pull <remote> <local>	Copies a specified file from an emulator/device instance to your development computer.
push <local> <remote>	Copies a specified file from your development computer to an emulator/device instance.
Ports and Networking	forward <local> <remote>	Forwards socket connections from a specified local port to a specified remote port on the emulator/device instance.	Port specifications can use these schemes: tcp:<portnum> local:<UNIX domain socket name> dev:<character device name> jdwp:<pid>
	ppp <tty> [parm]...	Run PPP over USB. <tty> — the tty for PPP stream. For exampledev:/dev/omap_csmi_ttyl. [parm]... — zero or more PPP/PPPD options, such asdefaultroute, local,notty, etc. Note that you should not automatically start a PPP connection.
Scripting	get-serialno	Prints the adb instance serial number string.	See Querying for Emulator/Device Instances for more information.
	get-state	Prints the adb state of an emulator/device instance.
	wait-for-device	Blocks execution until the device is online — that is, until the instance state is device.	You can prepend this command to other adb commands, in which case adb will wait until the emulator/device instance is connected before issuing the other commands. Here's an example: adb wait-for-device shell getprop Note that this command does not cause adb to wait until the entire system is fully booted. For that reason, you should not prepend it to other commands that require a fully booted system. As an example, the install requires the Android package manager, which is available only after the system is fully booted. A command such as adb wait-for-device install <app>.apk would issue the install command as soon as the emulator or device instance connected to the adb server, but before the Android system was fully booted, so it would result in an error.
Server	start-server	Checks whether the adb server process is running and starts it, if not.
	kill-server	Terminates the adb server process.
Shell	shell	Starts a remote shell in the target emulator/device instance.	See Issuing Shell Commands for more information.
	shell [<shellCommand>]	Issues a shell command in the target emulator/device instance and then exits the remote shell.

Issuing Shell Commands

Adb provides an ash shell that you can use to run a variety of commands on an emulator or device. The command binaries are stored in the file system of the emulator or device, in this location:

/system/bin/...

You can use the shell command to issue commands, with or without entering the adb remote shell on the emulator/device.

To issue a single command without entering a remote shell, use the shell command like this:

adb [-d|-e|-s {<serialNumber>}] shell <shellCommand>

To drop into a remote shell on a emulator/device instance, use the shell command like this:

adb [-d|-e|-s {<serialNumber>}] shell

When you are ready to exit the remote shell, use CTRL+D or exit to end the shell session.

The sections below provide more information about shell commands that you can use.

Examining sqlite3 Databases from a Remote Shell

From an adb remote shell, you can use the sqlite3 command-line program to manage SQLite databases created by Android applications. The sqlite3 tool includes many useful commands, such as .dump to print out the contents of a table and .schema to print the SQL CREATE statement for an existing table. The tool also gives you the ability to execute SQLite commands on the fly.

To use sqlite3, enter a remote shell on the emulator instance, as described above, then invoke the tool using thesqlite3 command. Optionally, when invoking sqlite3 you can specify the full path to the database you want to explore. Emulator/device instances store SQLite3 databases in the folder /data/data/<package_name>/databases/.

Here's an example:

$ adb -s emulator-5554 shell
# sqlite3 /data/data/com.example.google.rss.rssexample/databases/rssitems.db
SQLite version 3.3.12
Enter ".help" for instructions
.... enter commands, then quit...
sqlite> .exit 

Once you've invoked sqlite3, you can issue sqlite3 commands in the shell. To exit and return to the adb remote shell, use exit or CTRL+D.

UI/Application Exerciser Monkey

The Monkey is a program that runs on your emulator or device and generates pseudo-random streams of user events such as clicks, touches, or gestures, as well as a number of system-level events. You can use the Monkey to stress-test applications that you are developing, in a random yet repeatable manner.

The simplest way to use the monkey is with the following command, which will launch your application and send 500 pseudo-random events to it.

$ adb shell monkey -v -p your.package.name 500

For more information about command options for Monkey, see the complete UI/Application Exerciser Monkeydocumentation page.

Other Shell Commands

The table below lists several of the adb shell commands available. For a complete list of commands and programs, start an emulator instance and use the adb -help command.

adb shell ls /system/bin

Help is available for most of the commands.

Shell Command	Description	Comments
dumpsys	Dumps system data to the screen.	The Dalvik Debug Monitor Server (DDMS) tool offers integrated debug environment that you may find easier to use.
dumpstate	Dumps state to a file.
logcat [<option>]... [<filter-spec>]...	Enables radio logging and prints output to the screen.
dmesg	Prints kernel debugging messages to the screen.
start	Starts (restarts) an emulator/device instance.
stop	Stops execution of an emulator/device instance.

Enabling logcat Logging

The Android logging system provides a mechanism for collecting and viewing system debug output. Logs from various applications and portions of the system are collected in a series of circular buffers, which then can be viewed and filtered by the logcat command.

You can use the logcat command to view and follow the contents of the system's log buffers. The general usage is:

[adb] logcat [<option>] ... [<filter-spec>] ...

You can use the logcat command from your development computer or from a remote adb shell in an emulator/device instance. To view log output in your development computer, you use

$ adb logcat

and from a remote adb shell you use

# logcat

See Reading and Writing Logs for complete information about logcat commend options and filter specifications.

Stopping the adb Server

In some cases, you might need to terminate the adb server process and then restart it. For example, if adb does not respond to a command, you can terminate the server and restart it and that may resolve the problem.

To stop the adb server, use the kill-server. You can then restart the server by issuing any adb command.