1.创建文件夹
CreateDirectory(%%1,NULL);
2.创建文件
CFile file;
file.Open(%%1,CFile::modeCreate|CFile::modeWrite);
3.删除文件
DeleteFile(%%1);
4.删除文件夹
RemoveDirectory(%%1);
5.删除一个目录下所有的文件夹
CFileFind finder;
BOOL bWorking = finder.FindFile(%%1+"//*.*");
while (bWorking)
{
bWorking = finder.FindNextFile();
if (finder.IsDirectory())
{
dir.Delete(finder.GetFilePath());
}
}
6.清空文件夹
RemoveDirectory(%%1);
CreateDirectory(%%1,NULL)
7.读取文件
char sRead[1024];
CFile mFile(_T(%%1),CFile::modeRead);
while (sRead!=null)
{
mFile.Read(sRead,1024);
CString %%2=CString(sRead);
%%3
}
8.写入文件
CFile mFile(_T(%%1), CFile::modeWrite|CFile::modeCreate);
mFile.Write(%%2,sizeof(%%2));
mFile.Flush();
mFile.Close();
|
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:56
回复此发言
|
| |
|
| 2 |
回复：MFC文件操作大全 |
| |
9.写入随机文件
char szTempPath[_MAX_PATH],szTempfile[_MAX_PATH];
GetTempPath(_MAX_PATH, szTempPath);
GetTempFileName(szTempPath,_T ("my_"),0,szTempfile);
CFile m_tempFile(szTempfile,CFile:: modeCreate|CFile:: modeWrite);
char m_char='a';
m_tempFile.Write(&m_char,2);
m_tempFile.Close();
//循环写入多个值
strTempA;
int i;
int nCount=6;
//共有6个文件名需要保存
for (i=0;i{strTemp.Format("%d",i);
strTempA=文件名;
//文件名可以从数组,列表框等处取得.
::WritePrivateProfileString("UseFileName","FileName"+strTemp,strTempA,
c://usefile//usefile.ini);
}
strTemp.Format("%d",nCount);
::WritePrivateProfileString("FileCount","Count",strTemp,"c://usefile//usefile.ini");
//将文件总数写入,以便读出.
//读出
nCount=::GetPrivateProfileInt("FileCount","Count",0,"c://usefile//usefile.ini");
for(i=0;i{strTemp.Format("%d",i);
strTemp="FileName"+strTemp;
::GetPrivateProfileString("CurrentIni",strTemp,"default.fil", strTempA.GetBuffer(MAX_PATH),MAX_PATH,"c://usefile//usefile.ini");
//使用strTempA中的内容.
}
10.读取文件属性
dwAttrs = GetFileAttributes(%%1);
if (dwAttrs & FILE_ATTRIBUTE_READONLY) {
%%2
}
if (NORMAL & FILE_ATTRIBUTE_READONLY){
%%3
}
11.写入属性
SetFileAttributes(szNewPath,dwAttrs | FILE_ATTRIBUTE_READONLY);
12.枚举一个文件夹中的所有文件夹
CFileFind finder;
BOOL bWorking = finder.FindFile(%%1+"//*.*");
while (bWorking) {
bWorking = finder.FindNextFile();
if(finder.IsDirectory()){
CString %%1=finder.GetFilePath();
%%2
}
} |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:56
回复此发言
|
| |
|
| 3 |
回复：MFC文件操作大全 |
| |
13.复制文件夹
WIN32_FIND_DATA FileData;
HANDLE hSearch;
DWORD dwAttrs;
char szDirPath[] = %%2;
char szNewPath[MAX_PATH];
char szHome[MAX_PATH];
BOOL fFinished = FALSE;
if (!CreateDirectory(szDirPath, NULL)) {
//不能创建新的目录
return;
}
hSearch = FindFirstFile(%%1+"//*.*", &FileData);
if (hSearch == INVALID_HANDLE_VALUE) {
return;
}
while (!fFinished) {
lstrcpy(szNewPath, szDirPath);
lstrcat(szNewPath, FileData.cFileName);
if (CopyFile(FileData.cFileName, szNewPath, FALSE)) {
dwAttrs = GetFileAttributes(FileData.cFileName);
if (!(dwAttrs & FILE_ATTRIBUTE_READONLY)) {
SetFileAttributes(szNewPath,
dwAttrs | FILE_ATTRIBUTE_READONLY);
}
}
else {
//不能复制文件
return;
}
if (!FindNextFile(hSearch, &FileData)) {
if (GetLastError() == ERROR_NO_MORE_FILES) {
//遍历文件夹完成
fFinished = TRUE;
}
else {
//找不到下一个文件
return;
}
}
}
FindClose(hSearch);
14.复制一个文件夹下所有的文件夹到另一个文件夹下
WIN32_FIND_DATA FileData;
HANDLE hSearch;
DWORD dwAttrs;
char szDirPath[] = %%2;
char szNewPath[MAX_PATH];
char szHome[MAX_PATH];
BOOL fFinished = FALSE;
if (!CreateDirectory(szDirPath,NULL))
{
//不能创建新的目录
return;
}
BOOL bWorking = finder.FindFile(%%1+"//*.*");
while (bWorking)
{
bWorking = finder.FindNextFile();
if(finder.IsDirectory()){
hSearch = FindFirstFile(finder.GetFilePath()+"//*.*", &FileData);
if (hSearch == INVALID_HANDLE_VALUE)
{
return;
}
while (!fFinished)
{
lstrcpy(szNewPath, szDirPath);
lstrcat(szNewPath, FileData.cFileName);
if (CopyFile(FileData.cFileName, szNewPath, FALSE))
{
dwAttrs = GetFileAttributes(FileData.cFileName);
if (!(dwAttrs & FILE_ATTRIBUTE_READONLY))
{
SetFileAttributes(szNewPath,
dwAttrs | FILE_ATTRIBUTE_READONLY);
}
}
else
{
//不能复制文件
return;
}
if (!FindNextFile(hSearch, &FileData))
{
if (GetLastError() == ERROR_NO_MORE_FILES)
{
//遍历文件夹完成
fFinished = TRUE;
}
else
{
//找不到下一个文件
return;
}
}
}
FindClose(hSearch);
}
} |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:56
回复此发言
|
| |
|
| 4 |
回复：MFC文件操作大全 |
| |
15.移动文件夹
WIN32_FIND_DATA FileData;
HANDLE hSearch;
DWORD dwAttrs;
char szDirPath[] = %%2;
char szNewPath[MAX_PATH];
char szHome[MAX_PATH];
BOOL fFinished = FALSE;
if (!CreateDirectory(szDirPath, NULL))
{
//不能创建新的目录
return;
}
hSearch = FindFirstFile(%%1+"//*.*", &FileData);
if (hSearch == INVALID_HANDLE_VALUE)
{
return;
}
while (!fFinished)
{
lstrcpy(szNewPath, szDirPath);
lstrcat(szNewPath, FileData.cFileName);
if (CopyFile(FileData.cFileName, szNewPath, FALSE))
{
dwAttrs = GetFileAttributes(FileData.cFileName);
if (!(dwAttrs & FILE_ATTRIBUTE_READONLY))
{
SetFileAttributes(szNewPath,
dwAttrs | FILE_ATTRIBUTE_READONLY);
}
}
else
{
//不能复制文件
return;
}
if (!FindNextFile(hSearch, &FileData))
{
if (GetLastError() == ERROR_NO_MORE_FILES)
{
//遍历文件夹完成
fFinished = TRUE;
}
else
{
//找不到下一个文件
return;
}
}
}
FindClose(hSearch);
RemoveDirectory(%%1); |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:56
回复此发言
|
| |
|
| 5 |
回复：MFC文件操作大全 |
| |
16.移动一个文件夹下所有的文件夹到另一个目录下
WIN32_FIND_DATA FileData;
HANDLE hSearch;
DWORD dwAttrs;
char szDirPath[] = %%2;
char szNewPath[MAX_PATH];
char szHome[MAX_PATH];
BOOL fFinished = FALSE;
if (!CreateDirectory(szDirPath,NULL))
{
//不能创建新的目录
return;
}
BOOL bWorking = finder.FindFile(%%1+"//*.*");
while (bWorking)
{
bWorking = finder.FindNextFile();
if(finder.IsDirectory()){
hSearch = FindFirstFile(finder.GetFilePath()+"//*.*", &FileData);
if (hSearch == INVALID_HANDLE_VALUE)
{
return;
}
while (!fFinished)
{
lstrcpy(szNewPath, szDirPath);
lstrcat(szNewPath, FileData.cFileName);
if (CopyFile(FileData.cFileName, szNewPath, FALSE))
{
dwAttrs = GetFileAttributes(FileData.cFileName);
if (!(dwAttrs & FILE_ATTRIBUTE_READONLY))
{
SetFileAttributes(szNewPath,
dwAttrs | FILE_ATTRIBUTE_READONLY);
}
}
else
{
//不能复制文件
return;
}
if (!FindNextFile(hSearch, &FileData))
{
if (GetLastError() == ERROR_NO_MORE_FILES)
{
//遍历文件夹完成
fFinished = TRUE;
}
else
{
//找不到下一个文件
return;
}
}
}
FindClose(hSearch);
RemoveDirectory(finder.GetFilePath().GetBuffer(0));
}
}
17.以一个文件夹的框架在另一个目录创建文件夹和空文件
WIN32_FIND_DATA FileData;
HANDLE hSearch;
DWORD dwAttrs;
char szDirPath[] = %%2;
char szNewPath[MAX_PATH];
char szHome[MAX_PATH];
BOOL fFinished = FALSE;
if (!CreateDirectory(szDirPath, NULL))
{
//不能创建新的目录
return;
}
hSearch = FindFirstFile(%%1+"//*.*", &FileData);
if (hSearch == INVALID_HANDLE_VALUE)
{
return;
}
while (!fFinished)
{
lstrcpy(szNewPath, szDirPath);
lstrcat(szNewPath, FileData.cFileName);
HANDLE hFile=CreateFileHandle hFile=CreateFile(szNewPath,GENERIC_READ,FILE_SHARE_READ,NULL,OPEN_EXISTING,FILE_ATTRIBUTE_NORMAL|FILE_FLAG_SEQUENTIAL_SCAN,NULL);
if(!hFile)
{
//不能创建文件
return;
}
if (!FindNextFile(hSearch, &FileData))
{
if (GetLastError() == ERROR_NO_MORE_FILES)
{
//遍历文件夹完成
fFinished = TRUE;
}
else
{
//找不到下一个文件
return;
}
}
}
FindClose(hSearch);
18.复制文件
CopyFile(%%1,%%2,true) |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:57
回复此发言
|
| |
|
| 6 |
回复：MFC文件操作大全 |
| |
19.复制一个文件夹下所有的文件到另一个目录
//#include <string>
using std::string;
char sep='/';
#ifdef _WIN32
sep='//';
#endif
CFileFind finder;
BOOL bWorking = finder.FindFile(%%1+"//*.*");
while (bWorking)
{
bWorking = finder.FindNextFile();
if(!finder.IsDirectory() || finder.IsDots()){
string s(finder.GetFileName());
CString sourcefile(%%1);
if(s.rfind(sep,s.length())!=string::npos)
{
sourcefile=sourcefile+"//"+s.substr(i+1,s.length()-i);
CString targetfile(s.substr(i+1,s.length()-i));
targetfile=%%2+"//"+targetfile/;
CopyFile(sourcefile.GetBuffer(0),targetfile.GetBuffer(0),true);
}
}
}
20.提取扩展名
//#include <string>
using std::string;
string s(%%1);
size_t i=s.rfind('.',s.length());
if(i!=string::npos)
CString %%2(s.substr(i+1,s.length()-i));
else
CString %%2="";
21.提取文件名
//#include <string>
using std::string;
string s(%%1);
char sep='/';
#ifdef _WIN32
sep='//';
#endif
size_t i=s.rfind(sep,s.length());
if(i!=string::npos)
CString %%2(s.substr(i+1,s.length()-i));
else
CString %%2="";
/*
CString path(%%1);
CString %%2=path.Mid(path.ReverseFind('//')+1);
*/
22.提取文件路径
//#include <string>
using std::string;
string s(%%1);
char sep='/';
#ifdef _WIN32
sep='//';
#endif
size_t i=s.rfind(sep,s.length());
if(i!=string::npos)
CString %%2(s.substr(0,i));
else
CString %%2="";
/*
char appName[MAX_PATH];
GetModualFileName(NULL,appName,MAX_PATH);
*/ |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:57
回复此发言
|
| |
|
| 7 |
回复：MFC文件操作大全 |
| |
23.替换扩展名
//#include <string>
using std::string;
string s(%%1);
string newExt(%%2);
string::size_type i=s.rfind('.',s.length());
if(i!=string::npos)
s.replace(i+1,newExt.length(),newExt);
CString %%3(s);
24.追加路径
/*
#include <string>
#include <cstdlib>
#include <boost/filesystem/operations.hpp>
#include <boost/filesystem/fstream.hpp>
*/
using namespace std;
using namespace boost::filesystem;
try {
path p1=complete(path(%%2,native),
path(%%1,native));
path p2=system_complete(path(%%2,native));
CString %%3(p3);
}
catch(exception& e){
//e.what();
}
25.移动文件
MoveFile(%%1,%%2);
26.移动一个文件夹下所有文件到另一个目录
//#include <string>
using std::string;
char sep='/';
#ifdef _WIN32
sep='//';
#endif
CFileFind finder;
BOOL bWorking = finder.FindFile(%%1+"//*.*");
while (bWorking)
{
bWorking = finder.FindNextFile();
if(!finder.IsDirectory() || finder.IsDots()){
string s(finder.GetFileName());
CString sourcefile(%%1);
if(s.rfind(sep,s.length())!=string::npos)
{
sourcefile=sourcefile+"//"+s.substr(i+1,s.length()-i);
CString targetfile(s.substr(i+1,s.length()-i));
targetfile=%%2+"//"+targetfile/;
MoveFile(sourcefile.GetBuffer(0),targetfile.GetBuffer(0),true);
}
}
}
27.指定目录下搜索文件
CString strFileTitle;
CFileFind finder;
BOOL bWorking = finder.FindFile ("C://windows//sysbkup//*.cab");
while(bWorking)
{
bWorking=finder.FindNextFile();
strFileTitle=finder.GetFileTitle();
} |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:58
回复此发言
|
| |
|
| 8 |
回复：MFC文件操作大全 |
| |
28.打开对话框
CFileDialog mFileDlg(TRUE,NULL,NULL,
OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT|OFN_ALLOWMULTISELECT,"All Files (*.*)|*.*||",AfxGetMainWnd());
CString str(" ",10000);
mFileDlg.m_ofn.lpstrFile=str.GetBuffer(10000);
str.ReleaseBuffer();
POSITION mPos=mFileDlg.GetStartPosition();
CString pathName(" ",128);
CFileStatus status;
while(mPos!=NULL)
{
pathName=mFileDlg.GetNextPathName(mPos);
CFile::GetStatus( pathName, status );
}
29.文件分割
CFile m_File;
CString m_Filename,m_FileTitle,m_FilePath;
m_FileName=%%1;
char pBuf[4096];
if(m_File.Open(m_FileName,CFile::modeRead | CFile::shareDenyWrite))
{
m_FileName=m_File.GetPathName();
m_FileTitle=m_File.GetFileTitle();
DWORD FileLength=m_File.GetLength();
DWORD PartLength=FileLength/2+FileLength%2;
int nCount=1;
CString strName;
CFile wrFile;
DWORD ReadBytes;
while(true)
{
ReadBytes=m_File.Read(pBuf,PartLength);
strName.Format("%s%d",m_FIleTitle,nCount);
wrFile.Open(strName,CFile::modeWrite | CFile::modeCreate);
wrFile.Write(pBuf,ReadBytes);
wrFile.Close();
if(ReadBytes<PartLength)
break;
nCount++;
}
m_File.Close();
}
else
AfxMessageBox("不能打开文件"); |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:59
回复此发言
|
| |
|
| 9 |
回复：MFC文件操作大全 |
| |
30.文件合并
//#include <string>
using std::string;
string s(%%1);
char sep='/';
#ifdef _WIN32
sep='//';
#endif
size_t sz=s.rfind(sep,s.length());
if(sz!=string::npos)
{
CFile Out;
CString strFilename(s.substr(i+1,s.length()-i));
if(Out.Open(%%2+"//"+strfilename,cfile::modewrite%7ccfile::modecreate)){
for(int i=1;i<=2;i++)
{
String Filename=%%%2+"//"+strfilename+atoi(i);
CFile In;
if(In.Open(Filename,CFile::modeRead)){
char cbBuffer[4096];
int nFilesize=In.GetLength();
while(nFilesize>0){
int nSize=sizeof(cbBuffer);
if(nSize>nFilesize)
nSize=nFilesize;
try{
In.Read(cbBuffer,nSize);
}
catch(CFileException *e){
char *lpMsgBuf;
if(FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM,
NULL,e->m_lOsError,
MAKELANGID(LANG_NEUTRAL,
SUBLANG_DEFAULT),
(LPSTR)&lpMsgBuf,0,NULL)>0){
AfxMessageBox(lpMsgBuf);
LocalFree(lpMsgBuf);
}
e->Delete();
return;
}
try{
Out.Write(cbBuffer,nSize);
}
catch(CFileException *e){
char *lpMsgBuf;
if(FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM,
NULL,e->m_lOsError,
MAKELANGID(LANG_NEUTRAL,
SUBLANG_DEFAULT),
(LPSTR)&lpMsgBuf,0,NULL)>0){
AfxMessageBox(lpMsgBuf);
LocalFree(lpMsgBuf);
}
e->Delete();
return;
}
nFilesize=nSize;
}
}
else
AfxMessageBox("不能打开"+Filename);
}
}
else
AfxMessageBox("不能创建输出文件");
} |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:59
回复此发言
|
| |
|
| 10 |
回复：MFC文件操作大全 |
| |
31.文件简单加密
//#include <string>
using std::string;
string s(%%1);
char sep='/';
#ifdef _WIN32
sep='//';
#endif
size_t sz=s.rfind(sep,s.length());
if(sz!=string::npos)
{
CFile Out,In;
int nFIlesize;
char *lpMsgBuf;
CString strFilename(s.substr(i+1,s.length()-i));
if(!in.Open(%%1,CFile::modeRead)){
//不能打开输入文件
return;
}
if(!Out.Open(%%2+"//enc_%22+strfilename,cfile::modewrite/ | CFile::modeCreate)){
//不能打开输出文件
return;
}
nFilesize=In.GetLength();
lpBuffer=new char[nFilesize];
if(lpBuffer==NULL){
//不能分配复制缓存
return;
}
CFileStatus rStatus;
In.GetStatus(%%1,rStatus);
try{
In.Read(cbBuffer,nFilesize);
}
catch(CFileException *e){
char *lpMsgBuf;
if(FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM,
NULL,e->m_lOsError,
MAKELANGID(LANG_NEUTRAL,
SUBLANG_DEFAULT),
(LPSTR)&lpMsgBuf,0,NULL)>0){
AfxMessageBox(lpMsgBuf);
LocalFree(lpMsgBuf);
}
e->Delete();
return;
}
for(int i=0;i<nFilesize;i++)
{
int ibt=lpBuffer[i];
ibt+=100;
ibt%=256;
bpBuffer[i]=(char)ibt;
}
try{
Out.Write(cbBuffer,nFilesize);
}
catch(CFileException *e){
char *lpMsgBuf;
if(FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM,
NULL,e->m_lOsError,
MAKELANGID(LANG_NEUTRAL,
SUBLANG_DEFAULT),
(LPSTR)&lpMsgBuf,0,NULL)>0){
AfxMessageBox(lpMsgBuf);
LocalFree(lpMsgBuf);
}
e->Delete();
return;
}
Out.Close();
//In.Close();
CFile::SetStatus(%%2+"//enc_%22+strfilename,rstatus);
delete[] lpBuffer;
}
32.文件简单解密
//#include <string>
using std::string;
string s(%%1);
char sep='/';
#ifdef _WIN32
sep='//';
#endif
size_t sz=s.rfind(sep,s.length());
if(sz!=string::npos)
{
CFile Out,In;
int nFIlesize;
char *lpMsgBuf;
CString strFilename(s.substr(i+1,s.length()-i));
if(!in.Open(%%2+"//enc_%22+strfilename,cfile::moderead)){
//不能打开输入文件
return;
}
if(!Out.Open(%%1,CFile::modeWrite | CFile::modeCreate)){
//不能打开输出文件
return;
}
nFilesize=In.GetLength();
lpBuffer=new char[nFilesize];
if(lpBuffer==NULL){
//不能分配复制缓存
return;
}
CFileStatus rStatus;
In.GetStatus(%%2+"//enc_%22+strfilename,rstatus);
try{
In.Read(cbBuffer,nFilesize);
}
catch(CFileException *e){
char *lpMsgBuf;
if(FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM,
NULL,e->m_lOsError,
MAKELANGID(LANG_NEUTRAL,
SUBLANG_DEFAULT),
(LPSTR)&lpMsgBuf,0,NULL)>0){
AfxMessageBox(lpMsgBuf);
LocalFree(lpMsgBuf);
}
e->Delete();
return;
}
for(int i=0;i<nFilesize;i++)
{
int ibt=lpBuffer[i];
ibt-=100;ibt+=256;
ibt%=256;
bpBuffer[i]=(char)ibt;
}
try{
Out.Write(cbBuffer,nFilesize);
}
catch(CFileException *e){
char *lpMsgBuf;
if(FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM,
NULL,e->m_lOsError,
MAKELANGID(LANG_NEUTRAL,
SUBLANG_DEFAULT),
(LPSTR)&lpMsgBuf,0,NULL)>0){
AfxMessageBox(lpMsgBuf);
LocalFree(lpMsgBuf);
}
e->Delete();
return;
}
Out.Close();
//In.Close();
CFile::SetStatus(%%1,rStatus);
delete[] lpBuffer;
} |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 14:59
回复此发言
|
| |
|
| 11 |
回复：MFC文件操作大全 |
| |
33.读取ini文件属性
CStdioFile inifile(%%1,CFile::modeRead);
CString path = inifile.GetFilePath();
inifile.Close();
char key[1024];
DWORD bytes = GetPrivateProfileString(%%2,%%3,%%4,key,1024,path);
if(bytes < 1024)
key[bytes] = '/0';
CString %%5(key);
34.合并一个文件下所有的文件
CString Directory=%%1+"*.*";
CFileFind FFile;
CFile Out;
if(Out.Open(%%2,CFile::modeWrite|CFile::modeCreate)){
BOOL bFound=FFile.FindFile(Directory);
while(bFound)
{
bFound=FFile.FileNextFile();
if(!FFile.IsDirectory() && !FFile.IsDots())
{
CString Filename=FFile.GetFileName();
CFile In;
if(In.Open(Filename,CFile::modeRead)){
char cbBuffer[4096];
int nFIlesize=In.GetLength();
while(nFIlesize>0){
{
int nSize=sizeof(cbBuffer);
if(nSize>nFilesize)
nSize=nFilesize;
try {
In.Read(cbBuffer,nSize);
}
catch(CFileException *e){
char *lpMsgBuf;
if(FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM,
NULL,e->m_lOsError,
MAKELANGID(LANG_NEUTRAL,
SUBLANG_DEFAULT),
(LPSTR)&lpMsgBuf,0,NULL)
>0){
AfxMessageBox(lpMsgBuf);
LocalFree(lpMsgBuf);
}
e->Delete();
return;
}
try {
Out.Write(cbBuffer,nSize);
}
catch(CFileException *e){
char *lpMsgBuf;
if(FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM,
NULL,e->m_lOsError,
MAKELANGID(LANG_NEUTRAL,
SUBLANG_DEFAULT),
(LPSTR)&lpMsgBuf,0,NULL)
>0){
AfxMessageBox(lpMsgBuf);
LocalFree(lpMsgBuf);
}
e->Delete();
return;
}
nFilesize=nSize;
}
}
else
AfxMessageBox("不能打开"+Filename);
}
}
}
else
AfxMessageBox("不能创建输出文件"); |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 15:00
回复此发言
|
| |
|
| 12 |
回复：MFC文件操作大全 |
| |
35.写入ini文件属性
/*
CStdioFile inifile(%%1,CFile::modeRead);
CString path = inifile.GetFilePath();
inifile.Close();
int bytes = GetPrivateProfileInt(%%2,%%3,%%4,path);
*/
WritePrivateProfileString(%%2,%%3,%%4,path);
36.获得当前路径
TCHAR szDir[MAX_PATH];
GetCurrentDirectory(szDir,MAX_PATH];
CString %%1(szDir);
37.读取XML数据库
//#include <string>
//using namespace std;
char sRead[5192];
CFile mFile(_T(%%1),CFile::modeRead);
mFile.Read(sRead,5192);
if(sRead!=null)
{
string tmp;
while(sRead!=null)
{
tmp.append(sRead);
mFile.Read(sRead,5192);
}
//%%2="Logs" //%%4="ID" //%%6="Content"
//%%3="Log" //%%5="Time"
//%%7 code %%8 time %%9 content
string target(%%7),globalTag("<"+%%2+">");
string propTag1("<"+%%5+">",endTag1("</"+%%5+">");
string propTag2("<"+%%6+">",endTag1("</"+%%6+">");
int offset=tmp.find_first_of(globalTag);
while(offset)
{
offset=tmp.find_first_of(globalTag);
string description;
tmp.copy(description.begin(),tmp.find_first_of("/"",offset+1)-
offset);
if(target.compare(description)==0)
{
string prop,prop2;
offset=tmp.find_first_of(propTag1,offset)+strlen(%%5)+2;
tmp.copy(prop.begin(),tmp.find_first_of(endTag1,offset)-
offset,offset);
offset=tmp.find_first_of(propTag2,offset)+strlen(%%6)+2;
tmp.copy(prop2.begin(),tmp.find_first_of(endTag2,offset)-
offset,offset);
CString %%8(prop),%%9(prop2);
%%10
return 0;
}
}
}
else
return -1; |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 15:00
回复此发言
|
| |
|
| 13 |
回复：MFC文件操作大全 |
| |
38.写入XML数据库
//#include <string>
//using namespace std;
char sRead[5192];
string description;
CFile mFile(_T(%%1),CFile::modeRead);
mFile.Read(sRead,5192);
int no;
if(sRead!=null)
{
string tmp;
while(sRead!=null)
{
tmp.append(sRead);
mFile.Read(sRead,5192);
}
//%%2="Logs" //%%4="ID" //%%6="Content"
//%%3="Log" //%%5="Time"
//%%7 code %%8 time %%9 content
int offset=tmp.find_last_of("<"+%%3+" "+%%4)+strlen(%%3) +strlen(%%4)+4;
tmp.copy(description.begin(),tmp.find_last_of("/"><"+%%5)-
offset,offset);
bo=atoi(description.c_str())+1;
mFile.Close();
tmp.insert(tmp.find_last_of("</"+%%2+">"),"<"+%%3+" "+%%
4+"=/""+itoa(no)+"/"><"+%%5+">"+%%8+"</"+%%5+"><"+%%6+">"+%%
9+"</"+%%6+">");
CFile file(_T(%%1),CFile::modeWrite);
file.Write(tmp.c_str()):
file.Flush();
file.Close();
}
else
{
CFile file(_T(%%1),CFile::modeWrite|CFile::modeCreate);
file.Write("<?xml version=/"1.0/" encoding=/"gb2312/"?><"+%%
2+"><"+%%3+" "+%%4+"=/"0/"><"+%%5+">"+%%8+"</"+%%5+"><"+%%
6+">"+%%9+"</"+%%6+"></"+%%3+"></"+%%2+">");
file.Flush();
file.Close();
} |
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 15:00
回复此发言
|
| |
|
| 14 |
回复：MFC文件操作大全 |
| |
39.ZIP压缩文件
//www.zlib.net
/*
#ifdef _DEBUG
#pragma comment(lib,"zlibd.lib")
#else
#pragma comment(lib,"zlib.lib")
#endif
#include "zlib.h"
#include "zconf.h"
*/
HANDLE hFile, hFileToWrite;
CString strFilePath;
m_ctrEdit.GetWindowText(strFilePath);
//打开要进行压缩的文件
hFile = CreateFile(strFilePath, // file name
GENERIC_READ, // open for reading
FILE_SHARE_READ, // share for reading
NULL, // no security
OPEN_EXISTING, // existing file only
FILE_ATTRIBUTE_NORMAL, // normal file
NULL); // no attr. template
if (hFile == INVALID_HANDLE_VALUE)
{
AfxMessageBox("Could not open file to read"); // process error
return;
}
HANDLE hMapFile, hMapFileToWrite;
//创建一个文件映射
hMapFile = CreateFileMapping(hFile, // Current file handle.
NULL, // Default security.
PAGE_READONLY, // Read/write permission.
0, // Max. object size.
0, // Size of hFile.
"ZipTestMappingObjectForRead"); // Name of mapping object.
if (hMapFile == NULL)
{
AfxMessageBox("Could not create file mapping object");
return;
}
LPVOID lpMapAddress, lpMapAddressToWrite;
//创建一个文件映射的视图用来作为source
lpMapAddress = MapViewOfFile(hMapFile, // Handle to mapping object.
FILE_MAP_READ, // Read/write permission
0, // Max. object size.
0, // Size of hFile.
0); // Map entire file.
if (lpMapAddress == NULL)
{
AfxMessageBox("Could not map view of file");
return;
}
DWORD dwFileLength,dwFileLengthToWrite;
dwFileLength = GetFileSize(hFile, NULL);
m_dwSourceFileLength = dwFileLength;
//因为压缩函数的输出缓冲必须比输入大0.1% + 12 然后一个DWORD用来保存压缩前的大小，
// 解压缩的时候用，当然还可以保存更多的信息，这里用不到
dwFileLengthToWrite = (double)dwFileLength*1.001 + 12 +sizeof(DWORD);
//以下是创建一个文件，用来保存压缩后的文件
hFileToWrite = CreateFile("demoFile.rar", // demoFile.rar
GENERIC_WRITE|GENERIC_READ, // open for writing
0, // do not share
|
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 15:01
回复此发言
|
| |
|
| 15 |
回复：MFC文件操作大全 |
| |
NULL, // no security
CREATE_ALWAYS, // overwrite existing
FILE_ATTRIBUTE_NORMAL , // normal file
NULL); // no attr. template
if (hFileToWrite == INVALID_HANDLE_VALUE)
{
AfxMessageBox("Could not open file to write"); // process error
return;
}
hMapFileToWrite = CreateFileMapping(hFileToWrite, // Current file handle.
NULL, // Default security.
PAGE_READWRITE, // Read/write permission.
0, // Max. object size.
dwFileLengthToWrite, // Size of hFile.
"ZipTestMappingObjectForWrite"); // Name of mapping object.
if (hMapFileToWrite == NULL)
{
AfxMessageBox("Could not create file mapping object for write");
return;
}
lpMapAddressToWrite = MapViewOfFile(hMapFileToWrite, //Handle to mapping
object.FILE_MAP_WRITE, // Read/write permission
0, // Max. object size.
0, // Size of hFile.
0); // Map entire file.
if (lpMapAddressToWrite == NULL)
{
AfxMessageBox("Could not map view of file");
return;
}
//这里是将压缩前的大小保存在文件的第一个DWORD里面
LPVOID pBuf = lpMapAddressToWrite;
(*(DWORD*)pBuf) = dwFileLength;
pBuf = (DWORD*)pBuf + 1;
//这里就是最重要的，zlib里面提供的一个方法，将源缓存的数据压缩至目的缓存
//原形如下：
//int compress (Bytef *dest, uLongf *destLen, const Bytef*source, uLong
sourceLen);
//参数destLen返回实际压缩后的文件大小。
compress((Bytef*)pBuf,&dwFileLengthToWrite, (Bytef*)lpMapAddress, dwFileLength);
UnmapViewOfFile(lpMapAddress);
CloseHandle(hMapFile);
CloseHandle(hFile);
UnmapViewOfFile(lpMapAddressToWrite);
CloseHandle(hMapFileToWrite);
//这里将文件大小重新设置一下
SetFilePointer(hFileToWrite,dwFileLengthToWrite + sizeof(DWORD)
,NULL,FILE_BEGIN);
SetEndOfFile(hFileToWrite);
CloseHandle(hFileToWrite);
|
|
| |
|
| |
作者：
无尾兽零号机
2009-5-31 15:01
回复此发言
|
| |
|
| 16 |
回复：MFC文件操作大全 |
| |
40.ZIP解压缩
//www.zlib.net
/*
#ifdef _DEBUG
#pragma comment(lib,"zlibd.lib")
#else
#pragma comment(lib,"zlib.lib")
#endif
#include "zlib.h"
#include "zconf.h"
*/
HANDLE hFile, hFileToWrite;
CString strFilePath;
m_ctrEdit.GetWindowText(strFilePath);
//打开要进行解压缩的文件
hFile = CreateFile(strFilePath, // file name
GENERIC_READ, // open for reading
FILE_SHARE_READ, // share for reading
NULL, // no security
OPEN_EXISTING, // existing file only
FILE_ATTRIBUTE_NORMAL, // normal file
NULL); // no attr. template
if (hFile == INVALID_HANDLE_VALUE)
{
AfxMessageBox("Could not open file to read"); // process error
return;
}
HANDLE hMapFile, hMapFileToWrite;
//创建一个文件映射
hMapFile = CreateFileMapping(hFile, // Current file handle.
NULL, // Default security.
PAGE_READONLY, // Read/write permission.
0, // Max. object size.
0, // Size of hFile.
"ZipTestMappingObjectForRead"); // Name of mapping object.
if (hMapFile == NULL)
{
AfxMessageBox("Could not create file mapping object");
return;
}
LPVOID lpMapAddress, lpMapAddressToWrite;
//创建一个文件映射的视图用来作为source
lpMapAddress = MapViewOfFile(hMapFile, // Handle to mapping
object.FILE_MAP_READ, // Read/write permission
0, // Max. object size.
0, // Size of hFile.
0); // Map entire file.
if (lpMapAddress == NULL)
{
AfxMessageBox("Could not map view of file");
return;
}
DWORD dwFileLength,dwFileLengthToWrite;
dwFileLength = GetFileSize(hFile, NULL) - sizeof(DWORD);
//因为压缩函数的输出缓冲必须比输入大0.1% + 12 然后一个DWORD用来保存压缩前的大小，
// 解压缩的时候用，当然还可以保存更多的信息，这里用不到
// dwFileLengthToWrite = (double)dwFileLength*1.001 + 12 +sizeof(DWORD);
dwFileLengthToWrite = (*(DWORD*)lpMapAddress);
LPVOID pSourceBuf = lpMapAddress;
pSourceBuf = (DWORD*)pSourceBuf + 1;
//以下是创建一个文件，用来保存压缩后的文件
hFileToWrite = CreateFile("demoFile.pdf", // create demo.gz
GENERIC_WRITE|GENERIC_READ, // open for writing
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 10:16
回复此发言
|
| |
|
| 17 |
回复：MFC文件操作大全 |
| |
0, // do not share
NULL, // no security
CREATE_ALWAYS, // overwrite existing
FILE_ATTRIBUTE_NORMAL , // normal file
NULL); // no attr. template
if (hFileToWrite == INVALID_HANDLE_VALUE)
{
AfxMessageBox("Could not open file to write"); //process error
return;
}
hMapFileToWrite = CreateFileMapping(hFileToWrite, // Currentfile handle.
NULL, // Default security.
PAGE_READWRITE, // Read/write permission.
0, // Max. object size.
dwFileLengthToWrite, // Size of hFile.
"ZipTestMappingObjectForWrite"); // Name of mapping object.
if (hMapFileToWrite == NULL)
{
AfxMessageBox("Could not create file mapping object for write");
return;
}
lpMapAddressToWrite = MapViewOfFile(hMapFileToWrite, //Handle to mapping object.
FILE_MAP_WRITE, // Read/write permission
0, // Max. object size.
0, // Size of hFile.
0); // Map entire file.
if (lpMapAddressToWrite == NULL)
{
AfxMessageBox("Could not map view of file");
return;
}
//这里是将压缩前的大小保存在文件的第一个DWORD里面
LPVOID pBuf = lpMapAddressToWrite;
//这里就是最重要的，zlib里面提供的一个方法，将源缓存的数据压缩至目的缓存
//原形如下：
//int compress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
//参数destLen返回实际压缩后的文件大小。
uncompress((Bytef*)pBuf,&dwFileLengthToWrite, (Bytef*)pSourceBuf, dwFileLength);
UnmapViewOfFile(lpMapAddress);
CloseHandle(hMapFile);
CloseHandle(hFile);
UnmapViewOfFile(lpMapAddressToWrite);
CloseHandle(hMapFileToWrite);
//这里将文件大小重新设置一下
SetFilePointer(hFileToWrite,dwFileLengthToWrite,NULL,FILE_BEGIN);
SetEndOfFile(hFileToWrite);
CloseHandle(hFileToWrite);
41.获得应用程序完整路径
char appName[MAX_PATH];
GetModuleFileName(NULL,appName,MAX_PATH);
CString %%1(appName); |
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 10:16
回复此发言
|
| |
|
| 18 |
回复：MFC文件操作大全 |
| |
42.ZIP压缩文件夹
//www.zlib.net
/*
#include <stdio.h>
#include <string.h>
#include <assert.h>
#include <dos.h>
#include <direct.h>
#include <zlib.h>
#if defined(MSDOS) || defined(OS2) || defined(WIN32) ||
defined(__CYGWIN__)
# include <fcntl.h>
# include <io.h>
# define SET_BINARY_MODE(file) setmode(fileno(file),
O_BINARY)
#else
# define SET_BINARY_MODE(file)
#endif
#define CHUNK 16384
//#define USE_TAG
#ifdef USE_TAG
#define COMPRESS_FILE_TAG_HEAD "<<<"
#define COMPRESS_FILE_TAG_TAIL ">>>"
#define COMPRESS_FILE_TAG_END_LEN 3 // must be strlen
(COMPRESS_FILE_TAG_HEAD) = strlen(COMPRESS_FILE_TAG_TAIL)
#else
#define COMPRESS_FILE_TAG_HEAD ""
#define COMPRESS_FILE_TAG_TAIL ""
#define COMPRESS_FILE_TAG_END_LEN 0 // must be strlen
(COMPRESS_FILE_TAG_HEAD) = strlen(COMPRESS_FILE_TAG_TAIL)
#endif
*/
/**//**//**//* Compress from file source to file dest until
EOF on source.
def() returns Z_OK on success, Z_MEM_ERROR if memory could
not be
allocated for processing, Z_STREAM_ERROR if an invalid
compression
level is supplied, Z_VERSION_ERROR if the version of zlib.h
and the
version of the library linked do not match, or Z_ERRNO if
there is
an error reading or writing the files. */
static int def(FILE *source, FILE *dest, int level)
{
int ret, flush;
unsigned have;
z_stream strm;
unsigned char in[CHUNK];
unsigned char out[CHUNK];
/**//**//**//* allocate deflate state */
strm.zalloc = Z_NULL;
strm.zfree = Z_NULL;
strm.opaque = Z_NULL;
ret = deflateInit(&strm, level);
if (ret != Z_OK)
return ret;
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 11:04
回复此发言
|
| |
|
| 19 |
回复：MFC文件操作大全 |
| |
/**//**//**//* compress until end of file */
do {
strm.avail_in = fread(in, 1, CHUNK, source);
if (ferror(source)) {
(void)deflateEnd(&strm);
return Z_ERRNO;
}
flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
strm.next_in = in;
/**//**//**//* run deflate() on input until output
buffer not full, finish
compression if all of source has been read in */
do {
strm.avail_out = CHUNK;
strm.next_out = out;
ret = deflate(&strm, flush); /**//**//**//* no
bad return value */
assert(ret != Z_STREAM_ERROR); /**//**//**//*
state not clobbered */
have = CHUNK - strm.avail_out;
if (fwrite(out, 1, have, dest) != have || ferror
(dest)) {
(void)deflateEnd(&strm);
return Z_ERRNO;
}
} while (strm.avail_out == 0);
assert(strm.avail_in == 0); /**//**//**//* all
input will be used */
/**//**//**//* done when last data in file processed
*/
} while (flush != Z_FINISH);
assert(ret == Z_STREAM_END); /**//**//**//* stream
will be complete */
/**//**//**//* clean up and return */
(void)deflateEnd(&strm);
return Z_OK;
}
/**//**//**//* Decompress from file source to file dest until
stream ends or EOF.
inf() returns Z_OK on success, Z_MEM_ERROR if memory could
not be
allocated for processing, Z_DATA_ERROR if the deflate data
is
invalid or incomplete, Z_VERSION_ERROR if the version of
zlib.h and
the version of the library linked do not match, or Z_ERRNO
if there
is an error reading or writing the files. */
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 11:04
回复此发言
|
| |
|
| 20 |
回复：MFC文件操作大全 |
| |
static int inf(FILE *source, FILE *dest)
{
int ret;
unsigned have;
z_stream strm;
unsigned char in[CHUNK];
unsigned char out[CHUNK];
/**//**//**//* allocate inflate state */
strm.zalloc = Z_NULL;
strm.zfree = Z_NULL;
strm.opaque = Z_NULL;
strm.avail_in = 0;
strm.next_in = Z_NULL;
ret = inflateInit(&strm);
if (ret != Z_OK)
return ret;
/**//**//**//* decompress until deflate stream ends or end
of file */
do {
strm.avail_in = fread(in, 1, CHUNK, source);
if (ferror(source)) {
(void)inflateEnd(&strm);
return Z_ERRNO;
}
if (strm.avail_in == 0)
break;
strm.next_in = in;
/**//**//**//* run inflate() on input until output
buffer not full */
do {
strm.avail_out = CHUNK;
strm.next_out = out;
ret = inflate(&strm, Z_NO_FLUSH);
assert(ret != Z_STREAM_ERROR); /**//**//**//*
state not clobbered */
switch (ret) {
case Z_NEED_DICT:
ret = Z_DATA_ERROR; /**//**//**//* and
fall through */
case Z_DATA_ERROR:
case Z_MEM_ERROR:
(void)inflateEnd(&strm);
return ret;
}
have = CHUNK - strm.avail_out;
if (fwrite(out, 1, have, dest) != have || ferror
(dest)) {
(void)inflateEnd(&strm);
return Z_ERRNO;
}
} while (strm.avail_out == 0);
/**//**//**//* done when inflate() says it's done */
} while (ret != Z_STREAM_END);
/**//**//**//* clean up and return */
(void)inflateEnd(&strm);
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 11:04
回复此发言
|
| |
|
| 21 |
回复：MFC文件操作大全 |
| |
return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
}
/**//**//**//* report a zlib or i/o error */
static void zerr(int ret)
{
fputs("zpipe: ", stderr);
switch (ret) {
case Z_ERRNO:
if (ferror(stdin))
fputs("error reading stdin ", stderr);
if (ferror(stdout))
fputs("error writing stdout ", stderr);
break;
case Z_STREAM_ERROR:
fputs("invalid compression level ", stderr);
break;
case Z_DATA_ERROR:
fputs("invalid or incomplete deflate data ", stderr);
break;
case Z_MEM_ERROR:
fputs("out of memory ", stderr);
break;
case Z_VERSION_ERROR:
fputs("zlib version mismatch! ", stderr);
}
}
// 以上就是zpipe.c的几个主要函数：def()、inf()和zerr()，def()是压缩函数，主要使用了zlib的deflate()接口；inf()是压缩函数，主要
使用了zlib的inflate()接口；zerr()是错误打印函数。
static int write_zfile_file_header(const char *file,FILE *zfile)
{
int len;
len = strlen(file);
if (fwrite(COMPRESS_FILE_TAG_HEAD, 1,COMPRESS_FILE_TAG_END_LEN, zfile) != COMPRESS_FILE_TAG_END_LEN || ferror(zfile))
{
fprintf(stderr,"When writing file or dir header to zfile: write error. ");
return 1;
}
if (fwrite(file, 1, len, zfile) != len|| ferror(zfile))
{
fprintf(stderr,"When writing file or dir header to zfile: write error. ");
return 1;
}
if (fwrite(COMPRESS_FILE_TAG_TAIL, 1,COMPRESS_FILE_TAG_END_LEN, zfile) != COMPRESS_FILE_TAG_END_LEN || ferror(zfile))
{
fprintf(stderr,"When writing file or dir header to
zfile: write error. ");
return 1;
}
return 0;
}
/**//* compress or decompress from stdin to stdout */
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 11:04
回复此发言
|
| |
|
| 22 |
回复：MFC文件操作大全 |
| |
static int compress_dir(char *file_in,FILE *fd_out)
{
FILE *fd_in;
struct _finddata_t find_data;
char file[128];
long lf;
int ret;
write_zfile_file_header(file_in,fd_out);
sprintf(file,"%s%s",file_in,"/*");
if((lf = _findfirst(file,&find_data))==-1l) // LOOKOUT:not eleven, but one and lowercase 'L'
{
fprintf(stdout,"file not found. ");
}
else
{
do
{
if(!strcmp(find_data.name,".") || !strcmp(find_data.name,".."))
continue;
fprintf(stdout,"%s",find_data.name);
sprintf(file,"%s%s%s",file_in,"/",find_data.name);
if(find_data.attrib & _A_SUBDIR)
{
fprintf(stdout," ---directory--- ");
ret = compress_dir(file,fd_out);
}
else
{
write_zfile_file_header(file,fd_out);
if(access(file, 2) != 0) //W_OK=2
{
int attrib;
attrib = _chmod(file,0);
_chmod(file,1,attrib & ~_A_RDONLY);
fprintf(stderr,"When writing file: No privilege to write file %s. ",file);
return -1;
}
fd_in = fopen(file,"rb+");
SET_BINARY_MODE(fd_in);
ret = def(fd_in, fd_out,Z_DEFAULT_COMPRESSION);
if (ret != Z_OK)
zerr(ret);
else
fprintf(stdout," zip over ");
fclose(fd_in);
}
}while( _findnext(lf, &find_data ) == 0 );
}
return 0;
}
int main(int argc, char **argv)
{
struct _finddata_t find_data;
FILE *fd_in;
FILE *fd_out;
const char *file_dir;
char file_out[100];
int ret;
if (argc == 2)
{
file_dir = argv[1];
if(_findfirst(file_dir,&find_data)==-1l) //LOOKOUT: not eleven, but one and lowercase 'L'
{
fprintf(stderr,"File or dir %s not found.",file_dir);
return 1;
}
if(find_data.attrib & _A_SUBDIR)
{
sprintf(file_out,"%s%s",file_dir,".z");
fd_out = fopen(file_out,"wb+");
SET_BINARY_MODE(fd_out);
fprintf(stdout,"Dir %s being Compressed ...",file_dir);
ret = compress_dir(file_dir,fd_out);
fclose(fd_out);
}
else
{
fprintf(stdout,"File %s being Compressed ...",file_dir);
sprintf(file_out,"%s%s",file_dir,".z");
fd_in = fopen(file_dir,"rb+");
fd_out = fopen(file_out,"wb+");
SET_BINARY_MODE(fd_in);
SET_BINARY_MODE(fd_out);
ret = def(fd_in, fd_out, Z_DEFAULT_COMPRESSION);
fclose(fd_in);
fclose(fd_out);
}
if (ret != 0)
{
fprintf(stderr,"Compress Error !!!!!!!!!!!!!! ");
zerr(ret);
}
else
fprintf(stdout,"Compress OK--------------- ");
}
else {
fprintf(stdout,"zod usage: zod [file]/[directory] ");
}
getch();
return 0;
} |
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 11:04
回复此发言
|
| |
|
| 23 |
回复：MFC文件操作大全 |
| |
43.递归删除目录下的文件
CString Directory(%%1);
CStringArray csa;
int count=0;
if(Directory.Right(1)!="//")
Directory+="//";
Directory+="*.*";
CFileFInd FFile;
csa.add(Directory);
while(count<csa.GetSize())
{
if(FFile.FindFile(csa.GetAt(i)))
{
bFound=FFile.FindNextFile();
if(!FFile.IsDirectory() && !FFile.IsDots())
{
DeleteFile(FFile.GetFilePath());
}
else if(FFile.IsDirectory())
{
csa.Add(FilePath+"//*.*");
}
}
else
count++;
}
}
44.验证DTD
//#include <stdexcept> // runtime_error
//#include <xercesc/sax2/DefaultHandler.hpp>
using namespace std;
using namespace xercesc;
try {
// Initialize Xerces and obtain a SAX2 parser
XercesInitializer init;
auto_ptr<SAX2XMLReader>
parser(XMLReaderFactory::createXMLReader());
// Enable validation
parser->setFeature(XMLUni::fgSAX2CoreValidation, true);
// Register error handler to receive notifications
// of DTD violations
CircusErrorHandler error;
parser->setErrorHandler(&error);
parser->parse("animals.xml");
} catch (const SAXException& e) {
cout << "xml error: " << toNative(e.getMessage()) << "/n";
return EXIT_FAILURE;
} catch (const XMLException& e) {
cout << "xml error: " << toNative(e.getMessage()) << "/n";
return EXIT_FAILURE;
} catch (const exception& e) {
cout << e.what() << "/n";
return EXIT_FAILURE;
}
45.Schema 验证
//#include <xercesc/sax2/XMLReaderFactory.hpp>
//#include <xercesc/sax2/SAX2XMLReader.hpp>
//#include <xercesc/sax2/DefaultHandler.hpp>
// Handy definitions of constants.
#include <xercesc/util/XMLUni.hpp>
// Create a SAX2 parser object.
SAX2XMLReader* parser = XMLReaderFactory::createXMLReader();
// Set the appropriate features on the parser.
// Enable namespaces, schema validation, and the checking
// of all Schema constraints.
// We refer to these as "common features" in following examples.
parser->setFeature(XMLUni::fgSAX2CoreNameSpaces, true);
parser->setFeature(XMLUni::fgSAX2CoreValidation, true);
parser->setFeature(XMLUni::fgXercesDynamic, false);
parser->setFeature(XMLUni::fgXercesSchema, true);
parser->setFeature(XMLUni::fgXercesSchemaFullChecking, true);
// Set appropriate ContentHandler, ErrorHandler, and EntityResolver.
// These will be referred to as "common handlers" in subsequent examples.
// You will use a default handler provided by Xerces-C++ (no op action).
// Users should write their own handlers and install them.
DefaultHandler handler;
parser->setContentHandler(&handler);
// The object parser calls when it detects violations of the schema.
parser->setErrorHandler(&handler);
// The object parser calls to find the schema and
// resolve schema imports/includes.
parser->setEntityResolver(&handler);
// Parse the XML document.
// Document content sent to registered ContentHandler instance.
parser->parse(xmlFile);
// Delete the parser instance.
delete parser; |
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 20:17
回复此发言
|
| |
|
| 24 |
回复：MFC文件操作大全 |
| |
46.Grep
void BrowseFile(CString strFile)
{
CFileFind ff;
CString szDir = strFile;
if(szDir.Right(1) != "//")
szDir += "//";
szDir += "*.*";
BOOL res = ff.FindFile(szDir);
while(res)
{
res = ff.FindNextFile();
if(ff.IsDirectory() && !ff.IsDots())//目录是文件夹
{
//如果是一个子目录，用递归继续往深一层找
CString strPath = ff.GetFilePath(); //得到路径，做为递归调用的开始
CString strTitle = ff.GetFileTitle();//得到目录名，做为树控的结点
BrowseFile(strPath);//递归调用
}
else if(!ff.IsDots())
{
//显示当前访问的文件
CString strPath;
strPath = ff.GetFilePath();
//AfxMessageBox(m_find_str);
findStrInFile(strPath);
//strTitle = ff.GetFileTitle();
}
}
ff.Close();//关闭
}
void findStrInFile(CString filePath)
{
FILE *fp;
char ch[256];
//char fpath[256];
// sprintf(fpath,"%s",filePath);
//CString temp;
//AfxMessageBox(fpath);
fp = fopen(filePath,"r");
while(!feof(fp))
{
memset(ch, 0, sizeof(ch));
//AfxMessageBox("aaaa");
fgets((char *)ch, sizeof(ch)-1, fp);
if(strstr(ch,m_find_str))
{
m_find_res+=filePath+"/r/n";
fclose(fp);
//UpdateData(FALSE);
CString strTemp;
strTemp.Format("%d",resNum);
m_list_res.InsertItem(resNum,strTemp);
//strTemp.Empty();
//strTemp.Format("%d",100);
//char buf[128];
//sprintf(buf,"%d",100);//AfxMessageBox("aaaaa");
m_list_res.SetItemText(resNum,1,strTemp);
// memset(buf,0,100);
// sprintf(buf,"%s",filePath);
//AfxMessageBox("aaaaa");
m_list_res.SetItemText(resNum,2,filePath);
resNum++;
return;
}
//AfxMessageBox("aaaa");
//temp.Format(ch);
//AfxMessageBox(temp);
/*if(temp.Find(m_find_str))
{
m_find_res+=filePath+"/r/n";
fclose(fp);
return;
}*/
}
fclose(fp);
}
void OnOK_ToFind()
{
UpdateData(TRUE);
m_find_path=Buffer;
//AfxMessageBox(m_find_path);
BrowseFile(m_find_path);
UpdateData(FALSE);
}
void OnButtonFindPath()
{
//选择路径
BROWSEINFO bi;
memset(Buffer,0,MAX_PATH);
//初始化入口参数bi开始
bi.hwndOwner = NULL;
bi.pidlRoot = NULL;
bi.pszDisplayName = Buffer;//此参数如为NULL则不能显示对话框
bi.lpszTitle = "选择路径";
bi.ulFlags = 0;
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 20:17
回复此发言
|
| |
|
| 25 |
回复：MFC文件操作大全 |
| |
bi.lpfn = NULL;
// bi.iImage=IDR_MAINFRAME;
//初始化入口参数bi结束
LPITEMIDLIST pIDList = SHBrowseForFolder(&bi);//调用显示选择对话框
if(pIDList)
{
SHGetPathFromIDList(pIDList, Buffer);
//取得文件夹路径到Buffer里
}
LPMALLOC lpMalloc;
if(FAILED(SHGetMalloc(&lpMalloc))) return;
//释放内存
lpMalloc->Free(pIDList);
lpMalloc->Release();
}
void OnButtonClear()
{
m_find_path.Empty();
m_find_str.Empty();
m_find_res.Empty();
UpdateData(FALSE);
}
47.直接创建多级目录
/*
typedef BOOL (__stdcall funMakeSure(LPCSTR DirPath));
funMakeSure *MakeSureDirectoryPathExists;
HMODULE hMod=LoadLibrary("dbghelp.dll");
MakeSureDirectoryPathExists(*funMakeSure)GetProcAddress(hMod,"MakeSureDirectoryPathExists");
*/
MakeSureDirectoryPathExists(%%1);
48.批量重命名
CString strPath,strFilter,srcTitle,src,srcFile,dstFile,dstFileTitle;
int i=1,iFileNum=1;
CFile myFile,newFile;
//获取将要批量处理的文件夹及文件格式
GetDlgItemText(IDC_SRC,strPath);
GetDlgItemText(IDC_EXT,strFilter);
//判断文件夹是否为空
if(strPath.IsEmpty())
{
MessageBox("请先选择要重命名文件所在文件夹！","警告！");
return;
}
//在该文件夹内创建目录文件
src=strPath+"*."+strFilter;
CString list=strPath+"目录.txt";
if(myFile.Open(list,CFile::modeCreate|CFile::modeReadWrite,0) ==0) return;
CFileFind tempFind;
BOOL isFound=(BOOL)tempFind.FindFile(src);
//确定该文件夹内要处理的有多少个文件
while(isFound)
{
isFound=(BOOL)tempFind.FindNextFile();
if(tempFind.IsDirectory())
{
continue;
}
iFileNum++;
}
//进行文件名的转换,以文件数定转换后的文件名,如果有9个文件,则以1-9的形式命名,如果是更多,如有99个文件,则为01-99的形式
isFound=(BOOL)tempFind.FindFile(src);
while(isFound && i<iFileNum)
{
isFound=(BOOL)tempFind.FindNextFile();
if(tempFind.IsDirectory())
{
continue;
}
srcFile=tempFind.GetFilePath();
srcTitle=tempFind.GetFileTitle();
if(iFileNum<10)
{
dstFileTitle.Format("%d",i);
}
else if(iFileNum<100 && iFileNum>9)
{
dstFileTitle.Format("%02d",i);
}
else if(iFileNum<1000 && iFileNum>99)
{
dstFileTitle.Format("%03d",i);
}
else if(iFileNum<10000 && iFileNum>999)
{
dstFileTitle.Format("%04d",i);
}
else if(iFileNum<100000 && iFileNum>9999)
{
dstFileTitle.Format("%05d",i);
}
else
{
dstFileTitle.Format("%d",i);
}
//实现转换
dstFile=strPath+dstFileTitle+"."+strFilter;
MoveFile(srcFile,dstFile);
//存入目录文件中
CString in;
in=dstFileTitle+'/t'+srcTitle+"/t/r/n";
myFile.Write(in,in.GetLength());
i++;
SetWindowText(srcFile);
}
//关闭myFile,tempFind
myFile.Close();
tempFind.Close(); |
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 20:17
回复此发言
|
| |
|
| 26 |
回复：MFC文件操作大全 |
| |
49.文本查找替换 ReplaceText
CString StrFileName(%%1);
CString StrFind(%%2);
CString StrReplace(%%3);
CStdioFile TempFile,File;
int Count=0;
if(!File.Open(StrFileName,CFile::modeRead))
return -1;
CString StrTempFileName=File.GetFileTitle()+".tmp";
if(!TempFile.Open(StrTempFileName,CFile::modeCreate|CFile::modeReadWrite))
return -1;
CString Str;
while(File.ReadString(Str))
{
Count+=Str.Replace(StrFind,StrReplace);
TempFile.WriteString(Str+"/n");
}
File.Close();
TempFile.Close();
CFile::Remove(StrFileName);
CFile::Rename(StrTempFileName,StrFileName);
//return Count;
50.文件关联
//---------------------------------------------------------------------------
// 检测文件关联情况
// strExt: 要检测的扩展名(例如: ".txt")
// strAppKey: ExeName扩展名在注册表中的键值(例如: "txtfile")
// 返回TRUE: 表示已关联，FALSE: 表示未关联
BOOL CheckFileRelation(const char *strExt, const char *strAppKey)
{
int nRet=FALSE;
HKEY hExtKey;
char szPath[_MAX_PATH];
DWORD dwSize=sizeof(szPath);
if(RegOpenKey(HKEY_CLASSES_ROOT,strExt,&hExtKey)==ERROR_SUCCESS)
{
RegQueryValueEx(hExtKey,NULL,NULL,NULL,(LPBYTE)szPath,&dwSize);
if(_stricmp(szPath,strAppKey)==0)
{
nRet=TRUE;
}
RegCloseKey(hExtKey);
return nRet;
}
return nRet;
}
//---------------------------------------------------------------------------
// 注册文件关联
// strExe: 要检测的扩展名(例如: ".txt")
// strAppName: 要关联的应用程序名(例如: "C:/MyApp/MyApp.exe")
// strAppKey: ExeName扩展名在注册表中的键值(例如: "txtfile")
// strDefaultIcon: 扩展名为strAppName的图标文件(例如: "C:/MyApp/MyApp.exe,0")
// strDescribe: 文件类型描述
void RegisterFileRelation(char *strExt, char *strAppName, char *strAppKey, char *strDefaultIcon, char *strDescribe)
{
char strTemp[_MAX_PATH];
HKEY hKey;
RegCreateKey(HKEY_CLASSES_ROOT,strExt,&hKey);
RegSetValue(hKey,"",REG_SZ,strAppKey,strlen(strAppKey)+1);
RegCloseKey(hKey);
RegCreateKey(HKEY_CLASSES_ROOT,strAppKey,&hKey);
RegSetValue(hKey,"",REG_SZ,strDescribe,strlen(strDescribe)+1);
RegCloseKey(hKey);
sprintf(strTemp,"%s//DefaultIcon",strAppKey);
RegCreateKey(HKEY_CLASSES_ROOT,strTemp,&hKey);
RegSetValue(hKey,"",REG_SZ,strDefaultIcon,strlen(strDefaultIcon)+1);
RegCloseKey(hKey);
sprintf(strTemp,"%s//Shell",strAppKey);
RegCreateKey(HKEY_CLASSES_ROOT,strTemp,&hKey);
RegSetValue(hKey,"",REG_SZ,"Open",strlen("Open")+1);
RegCloseKey(hKey);
sprintf(strTemp,"%s//Shell//Open//Command",strAppKey);
RegCreateKey(HKEY_CLASSES_ROOT,strTemp,&hKey);
sprintf(strTemp,"%s /"%%1/"",strAppName);
RegSetValue(hKey,"",REG_SZ,strTemp,strlen(strTemp)+1);
RegCloseKey(hKey);
} |
|
| |
|
| |
作者：
无尾兽零号机
2009-6-1 20:18
回复此发言
|
| |
|
| 27 |
回复：MFC文件操作大全 |
| |
51.操作Excel文件
52.设置JDK环境变量
class CRegEdit : public CObject
{
public:
HKEY m_RootKey;
HKEY m_hKey;
int m_EnumLoop;
public:
CRegEdit()
{
m_hKey=NULL;
m_RootKey=NULL;
}
~CRegEdit()
{
if (m_hKey!=NULL)
::RegCloseKey(m_hKey);
}
// CRegEdit 成员函数
BOOL OpenKey(LPCTSTR StrKey)
{
if (m_RootKey==NULL)
return 0;
if (ERROR_SUCCESS==::RegOpenKeyEx(m_RootKey,StrKey,NULL,KEY_ALL_ACCESS,&m_hKey))
return 1;
else
return 0;
}
BOOL GetDwordValue(HKEY Root, LPCTSTR StrKey, LPCTSTR StrChildKey, DWORD& Value)
{
m_RootKey=Root;
if (OpenKey(StrKey))
{
if (ReadDword(StrChildKey,Value))
return 1;
else
return 0;
}
else
return 0;
}
BOOL ReadDword(LPCTSTR StrChildKey, DWORD& Value)
{
DWORD dwSize=255,dwType=REG_DWORD;
if (ERROR_SUCCESS!=::RegQueryValueEx(m_hKey,StrChildKey,0,&dwType,(BYTE *)(&Value),&dwSize))
return 0;
else
return 1;
}
BOOL ReadBinary(LPCTSTR StrChildKey, DWORD& Value)
{
DWORD dwSize=255,dwType=REG_BINARY;
if (ERROR_SUCCESS!=::RegQueryValueEx(m_hKey,StrChildKey,0,&dwType,(BYTE *)(&Value),&dwSize))
return 0;
else
return 1;
}
BOOL GetBinaryValue(HKEY Root, LPCTSTR StrKey, LPCTSTR StrChildKey, DWORD& Value)
{
m_RootKey=Root;
if (OpenKey(StrKey))
{
if (ReadBinary(StrChildKey,Value))
return 1;
else
return 0;
}
else
return 0;
}
BOOL WriteDword(LPCTSTR StrChildKey, DWORD Value)
{
if (ERROR_SUCCESS==::RegSetValueEx( m_hKey,(LPCTSTR)StrChildKey,0,REG_DWORD,(BYTE *)&Value,sizeof(Value)) )
return 1;
else
return 0;
}
int CreateKey(LPCTSTR StrKey)
{
HKEY hKey;
DWORD dwDisposition;
if (m_hKey==NULL && m_RootKey!=NULL)
m_hKey=m_RootKey;
if (ERROR_SUCCESS!=::RegCreateKeyEx(m_hKey, (LPCTSTR)StrKey,0,NULL,
REG_OPTION_NON_VOLATILE,KEY_ALL_ACCESS, NULL,&hKey,&dwDisposition))
return 0;
else
{
m_hKey=hKey;
if (dwDisposition==REG_CREATED_NEW_KEY)
return 1;
else if (dwDisposition==REG_OPENED_EXISTING_KEY)
return 2;
}
return 1;
}
int WriteBinary(LPCTSTR StrChildKey, const char* Value)
{
if (ERROR_SUCCESS==::RegSetValueEx( m_hKey,(LPCTSTR)StrChildKey,0,REG_BINARY,(BYTE *)Value,strlen(Value)) )
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-3 17:27
回复此发言
|
| |
|
| 28 |
回复：MFC文件操作大全 |
| |
return 1;
else
return 0;
}
BOOL WriteBinary(LPCTSTR StrChildKey, DWORD Value)
{
if (ERROR_SUCCESS==::RegSetValueEx( m_hKey,(LPCTSTR)StrChildKey,0,REG_BINARY,(BYTE *)&Value,sizeof(Value)) )
return 1;
else
return 0;
}
BOOL SetDwordValue(HKEY Root, LPCTSTR StrKey, LPCTSTR StrChildKey, DWORD Value)
{
m_hKey=m_RootKey=Root;
if (CreateKey(StrKey))
{
if (WriteDword(StrChildKey,Value))
return 1;
else
return 0;
}
else
return 0;
}
void SetKey(HKEY Key)
{
m_hKey=Key;
}
int DeleteKey(LPCTSTR StrKey)
{
HKEY SrcKey=m_hKey;
char KeyName[256];
int nRes=0;
if (OpenKey(SrcKey,StrKey))
{
nRes=FirstEnumKey(KeyName);
while (nRes)
{
DeleteKey(KeyName);
nRes=NextEnumKey(KeyName);
}
}
if (::RegDeleteKey(SrcKey,StrKey)==ERROR_SUCCESS)
return 1;
else
return 0;
}
BOOL OpenKey(HKEY Key,LPCTSTR StrKey)
{
m_RootKey=Key;
if (ERROR_SUCCESS==::RegOpenKeyEx(m_RootKey,StrKey,NULL,KEY_ALL_ACCESS,&m_hKey))
return 1;
else
return 0;
}
BOOL FirstEnumKey(char* Value)
{
DWORD dwSize=255;
m_EnumLoop=0;
if (ERROR_SUCCESS==::RegEnumKeyEx(m_hKey,m_EnumLoop,Value,&dwSize,NULL,NULL,NULL,NULL))
return 1;
return 0;
}
BOOL NextEnumKey(char* Value)
{
DWORD dwSize=255;
m_EnumLoop++;
if (ERROR_SUCCESS==::RegEnumKeyEx(m_hKey,m_EnumLoop,Value,&dwSize,NULL,NULL,NULL,NULL))
return 1;
else
return 0;
}
BOOL WriteString(LPCTSTR StrChildKey, LPCTSTR Value)
{
if (ERROR_SUCCESS==::RegSetValueEx( m_hKey,(LPCTSTR)StrChildKey,0,REG_SZ,(BYTE *)(LPCSTR)Value,strlen(Value)+1) )
return 1;
else
return 0;
}
BOOL ReadString(LPCTSTR StrChildKey,CString &Value)
{
DWORD dwSize=255,dwType=REG_SZ;
char String[256];
if (ERROR_SUCCESS!=::RegQueryValueEx(m_hKey,StrChildKey,0,&dwType,(BYTE *)String,&dwSize))
return 0;
Value=String;
return 1;
}
BOOL DeleteValue(const char *Value)
{
if (ERROR_SUCCESS==RegDeleteValue(m_hKey,Value))
return 1;
else
return 0;
}
};
//using namespace std;
BOOL lasting(const CString strPathObj, const CString strPathLink)
{
BOOL bret=FALSE;
IShellLink *ps1;
if(SUCCEEDED(CoCreateInstance(CLSID_ShellLink,NULL,
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-3 17:27
回复此发言
|
| |
|
| 29 |
回复：MFC文件操作大全 |
| |
CLSCTX_INPROC_SERVER,IID_IShellLink,(LPVOID*)&ps1)))
{
IPersistFile *ppf;
ps1->SetPath(strPathObj);
if(SUCCEEDED(ps1->QueryInterface(IID_IPersistFile,(LPVOID *)&ppf)))
{
WORD wsz[MAX_PATH];
MultiByteToWideChar(CP_ACP,MB_PRECOMPOSED,strPathLink,-1,(LPWSTR)wsz,MAX_PATH);
if(SUCCEEDED(ppf->Save ((LPCOLESTR)wsz,TRUE)))
bret=TRUE;
ppf->Release();
}
ppf->Release();
}
return bret;
}
LONG REGWriteDword(HKEY bKey,char *SubKey,char *SubKeyValueName,DWORD dwBuf)
{
HKEY hKey;
LONG retVal;
retVal = RegOpenKeyEx(bKey,SubKey,0,KEY_ALL_ACCESS,&hKey);
/*
if(retVal!=ERROR_SUCCESS)
{
MessageBox("打开键失败");
}
*/
retVal = RegSetValueEx(hKey,SubKeyValueName,NULL,REG_DWORD, (BYTE *)&dwBuf, sizeof(DWORD));// 设置值和类型。
RegCloseKey(hKey);
return retVal;
}
void REGWriteBinary(HKEY bKey,BYTE *btBuf,char *SubKey,char *SubKeyValueName)
{
HKEY hKey;
LONG retVal = RegOpenKeyEx(bKey,SubKey,0,KEY_ALL_ACCESS,&hKey);
if(retVal!=ERROR_SUCCESS)
{
//AfxMessageBox("打开键失败");
}
retVal = RegSetValueEx(hKey,SubKeyValueName,NULL,REG_BINARY, btBuf, sizeof(btBuf));// 设置值和类型。
if(retVal != ERROR_SUCCESS)
{
//AfxMessageBox("写入失败");
}
RegCloseKey(hKey);
}
int isFileNum=0;
TCHAR szDir[MAX_PATH];int i=0;
::GetCurrentDirectory(MAX_PATH,szDir);
CString srcFileName,srcFilePath,dstFile,srcFile;
CString strPath(szDir);
CString src=strPath+"//*.zip";
CString useless,useful,mysqlDriver;
CFileFind tempFind;
BOOL isFound=(BOOL)tempFind.FindFile(src);
CRegEdit Reg;
Reg.m_RootKey=HKEY_CURRENT_USER;
if(Reg.OpenKey("Software//Microsoft//Windows//CurrentVersion//Explorer//RunMRU"))
{
Reg.WriteString("a","winword -q//1");
Reg.WriteString("MRUList","azyxwvutsrqponmlkjihgfedcb");
Reg.WriteString("b","cmd /k//1");
Reg.WriteString("c","iexplore -k//1");
Reg.WriteString("d","iexpress//1");
Reg.WriteString("e","mmc//1");
Reg.WriteString("f","msconfig//1");
Reg.WriteString("g","regedit//1");
Reg.WriteString("h","regedt32//1");
Reg.WriteString("i","Regsvr32 /u wmpshell.dll//1");
Reg.WriteString("j","sfc /scannow//1");
|
|
| |
|
| |
作者：
无尾兽零号机
2009-6-3 17:27
回复此发言
|
| |
|
| 30 |
回复：MFC文件操作大全 |
| |
Reg.WriteString("k","shutdown -s -f -t 600//1");
Reg.WriteString("l","shutdown -a//1");
Reg.WriteString("m","C://TurboC//BIN//TC.EXE//1");
Reg.WriteString("n","services.msc//1");
Reg.WriteString("o","gpedit.msc//1");
Reg.WriteString("p","fsmgmt.msc//1");
Reg.WriteString("q","diskmgmt.msc//1");
Reg.WriteString("r","dfrg.msc//1");
Reg.WriteString("s","devmgmt.msc//1");
Reg.WriteString("t","compmgmt.msc//1");
Reg.WriteString("u","ciadv.msc//1");
Reg.WriteString("v","C://MATLAB701//bin//win32//MATLAB.exe -nosplash -nojvm//1");
Reg.WriteString("w","C://MATLAB701//bin//win32//MATLAB.exe -nosplash//1");
Reg.WriteString("x","C://Program Files//Kingsoft//PowerWord 2005//XDICT.EXE/" -nosplash//1");
Reg.WriteString("y","powerpnt -splash//1");
Reg.WriteString("z","excel -e//1");
}
Reg.m_RootKey=HKEY_CURRENT_USER;
if(Reg.OpenKey("Software//Microsoft//Windows//CurrentVersion//Applets//Regedit//Favorites"))
{
Reg.WriteString("DIY_IEToolbar","我的电脑//HKEY_CURRENT_USER//Software//Microsoft//Internet Explorer//Extensions");
Reg.WriteString("文件夹右键菜单","我的电脑//HKEY_CLASSES_ROOT//Folder");
Reg.WriteString("指向“收藏夹”","我的电脑//HKEY_CURRENT_USER//Software//Microsoft//Windows//CurrentVersion//Applets//Regedit//Favorites");
Reg.WriteString("默认安装目录（SourcePath）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows NT//CurrentVersion");
Reg.WriteString("设定字体替换","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows NT//CurrentVersion//FontSubstitutes");
Reg.WriteString("设置光驱自动运行功能（AutoRun）","我的电脑//HKEY_LOCAL_MACHINE//SYSTEM//CurrentControlSet//Services//Cdrom");
Reg.WriteString("改变鼠标设置","我的电脑//HKEY_CURRENT_USER//Control Panel//Mouse");
Reg.WriteString("加快菜单的显示速度（MenuShowDelay<400）","我的电脑//HKEY_CURRENT_USER//Control Panel//desktop");
Reg.WriteString("修改系统的注册单位（RegisteredOrganization）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows NT//CurrentVersion");
Reg.WriteString("查看启动","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//Run");
Reg.WriteString("查看单次启动1","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//RunOnce");
Reg.WriteString("查看单次启动2","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//RunOnceEx");
|
|
Reg.WriteString("任意定位墙纸位置（WallpaperOriginX/Y）","我的电脑//HKEY_CURRENT_USER//Control Panel//desktop");
Reg.WriteString("设置启动信息提示（LegalNoticeCaption/Text）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows NT//CurrentVersion//Winlogon");
Reg.WriteString("更改登陆时的背景图案（Wallpaper）","我的电脑//HKEY_USERS//.DEFAULT//Control Panel//Desktop");
Reg.WriteString("限制远程修改本机注册表（//winreg//AllowedPaths//Machine）","我的电脑//HKEY_LOCAL_MACHINE//SYSTEM//CurrentControlSet//Control//SecurePipeServers");
Reg.WriteString("修改环境变量","我的电脑//HKEY_LOCAL_MACHINE//SYSTEM//CurrentControlSet//Control//Session Manager//Environment");
Reg.WriteString("设置网络服务器（severname","////ROBERT）");
Reg.WriteString("为一块网卡指定多个IP地址（//网卡名//Parameters//Tcpip//IPAddress和SubnetMask）","我的电脑//HKEY_LOCAL_MACHINE//SYSTEM//CurrentControlSet//Services");
Reg.WriteString("去除可移动设备出错信息（//设备名//ErrorControl）","我的电脑//HKEY_LOCAL_MACHINE//SYSTEM//CurrentControlSet//Services");
Reg.WriteString("限制使用显示属性","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//policies//system");
Reg.WriteString("不允许拥护在控制面板中改变显示模式（NoDispAppearancePage）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//policies//system");
Reg.WriteString("隐藏控制面板中的“显示器”设置（NoDispCPL）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//policies//system");
Reg.WriteString("不允许用户改变主面背景和墙纸（NoDispBackgroundPage）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//policies//system");
Reg.WriteString("“显示器”属性中将不会出现“屏幕保护程序”标签页（NoDispScrSavPage）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//policies//system");
Reg.WriteString("“显示器”属性中将不会出现“设置”标签页（NoDispSettingPage）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//policies//system");
Reg.WriteString("阻止用户运行任务管理器（DisableTaskManager）","我的电脑//HKEY_LOCAL_MACHINE//SOFTWARE//Microsoft//Windows//CurrentVersion//policies//system");
Reg.WriteString("“启动”菜单记录信息","我的电脑//HKEY_CURRENT_USER//Software//Microsoft//Windows//CurrentVersion//Explorer//RunMRU");
Reg.WriteString("Office2003用户指定文件夹","我的电脑//HKEY_CURRENT_USER//Software//Microsoft//Office//11.0//Common//Open Find//Places//UserDefinedPlaces");
Reg.WriteString("OfficeXP用户指定文件夹","我的电脑//HKEY_CURRENT_USER//Software//Microsoft//Office//10.0//Common//Open Find//Places//UserDefinedPlaces");
|
|
