http://support.microsoft.com/kb/918461
A virtual machine generally has difficulty synchronizing its time with the physical host computer. Although Microsoft Virtual Server 2005 Virtual Machine Additions are intended to help correct this problem, you might experience time synchronization problems because of the way in which the guest operating system keeps track of the system time. Every kind of operating system has its own way to keep track of the system time.The Linux 2.6 kernel uses three different kinds of algorithms to keep track of the system time. These algorithms are more efficient than the algorithms that are used by the Linux 2.4 kernel and by earlier Linux kernels.
Back to the top
Time synchronization in a virtual machine
An operating system generally tracks time by using the periodic time interrupts that are generated by a specific hardware device. Generally, an operating system obtains the time from a battery-backed Complimentary Metal Oxide Semi-conductor (CMOS) clock during the operating system's startup procedure. The operating system then configures a timer device to generate periodic interrupts. The operating system keeps track of time by counting these interrupts.
For a virtual machine, the actual physical hardware is shared by the host operating system and by the guest operating system. When a virtual machine generates a time interrupt, the guest operating system may be running or may not be running. Therefore, the guest operating system does not immediately account for some of these interrupts. To work around this issue, the virtual machine keeps a backlog of these interrupts. Additionally, the virtual machine increases the frequency of timer interrupts when it is running. The increased frequency of timer interrupts is intended to help the guest operating system maintain the correct time. However, the increased frequency of these interrupts could cause the guest operating system to miss some of the interrupts. These missed interrupts are known as "lost ticks." Lost ticks cause the guest operating system time to lag behind the actual time. Although you may experience this issue on a physical computer, you are more likely to experience this issue in a guest operating system that is running on a virtual machine.
The Linux 2.4 kernel and earlier Linux kernels rely on the timer interrupts that are delivered by the timer.The algorithms that are implemented for time synchronization in the Linux 2.4 kernel do not account for lost ticks. This behavior may cause the Linux guest operating system time to lag behind the actual clock. To help resolve this issue, some Linux distributions patch the Linux 2.4 kernel to deliver timer interrupts at a faster rate. However, the Linux guest operating system could still experience time synchronization issues because of lost ticks.
The Linux 2.6 kernel implements more efficient algorithms to resolve this time synchronization issue. Unlike the Linux 2.4 algorithms, the Linux 2.6 algorithms adjust for lost ticks. However, this adjustment may cause the Linux-based virtual machine to gain time. The Linux 2.6 kernel has three different clock parameters that can be passed to the kernel at boot time. Use these parameters to select the algorithms to use for time synchronization. For more information about these algorithms, see the "Timekeeping in Linux" section. Each of these timekeeping algorithms has advantages and disadvantages. However, you are more likely to notice disadvantages on a virtual machine than on a physical computer.
Computer timer hardware
Every operating system has its own method to handle timekeeping issues. There are various kinds of timer mechanisms that are used to keep time on a computer. These timer mechanisms include the following:
- Programmable Interval Timer (PIT)
- CMOS Real Time Clock (RTC)
- Local Advanced Programmable Interrupt Controller (APIC) Timers
- Advanced Configuration and Power Interface (ACPI) (This mechanism is also known as a Chipset Timer.)
- Time Stamp Counter (TSC)
- High Precision Event Timer (HPET)
Timekeeping in Linux
On an x86-based platform, the Linux 2.6 kernel interacts with the following kinds of clocks to keep track of time:
- Power Management Timer (PMTMR)
This clock has the following characteristics:
- This clock is set by using the clock=pmtmr kernel parameter.
- This clock uses the ACPI timer.
- This clock may cause smaller time gains.
- Time Stamp Counter (TSC)
This clock has the following characteristics:
- This clock is set by using the clock=tsc kernel parameter. (This is the default parameter.)
- This clock uses the PIT counter and the TSC for time interpolation.
- This clock may cause overcorrection in a virtual machine environment. Therefore, the guest operating system clock may run too fast.
- This clock may cause time gains of up to 10 percent.
- Programmable Interval Timer (PIT)
This clock has the following characteristics:
- This clock is set by using the clock=pit kernel parameter.
- This clock uses only the PIT counter for time interpolation.
- This clock uses the simplest of the available algorithms.
- This clock does not gain time because it does not use lost tick correction code.
For more information about Virtual Server 2005, visit the following Microsoft Web site:
http://www.microsoft.com/windowsserversystem/virtualserver/default.mspx
(http://www.microsoft.com/windowsserversystem/virtualserver/default.mspx)
The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.