LLDB命令 以及相对应的GDB的命令

搞ios开发不学点debuger命令，有点说不过去。以下的表格罗列了LLDB命令 以及相对应的GDB的命令，并且列举了双方内置的兼容的命令别名。

执行类命令集

LLDB	GDB
Launch a process no arguments.
(lldb) process launch (lldb) run (lldb) r	(gdb) run (gdb) r
Launch a process with arguments <args>.
(lldb) process launch — <args> (lldb) r <args>	(gdb) run <args> (gdb) r <args>
Launch a process for with arguments a.out 1 2 3 without having to supply the args every time.
% lldb — a.out 1 2 3 (lldb) run … (lldb) run …	% gdb –args a.out 1 2 3 (gdb) run … (gdb) run …
Launch a process with arguments in new terminal window (Mac OS X only).
(lldb) process launch –tty — <args> (lldb) pro la -t — <args>
Launch a process with arguments in existing terminal /dev/ttys006 (Mac OS X only).
(lldb) process launch –tty=/dev/ttys006 — <args> (lldb) pro la -t/dev/ttys006 — <args>
Attach to a process with process ID 123.
(lldb) process attach –pid 123 (lldb) attach -p 123	(gdb) attach 123
Attach to a process named “a.out”.
(lldb) process attach –name a.out (lldb) pro at -n a.out	(gdb) attach a.out
Wait for a process named “a.out” to launch and attach.
(lldb) process attach –name a.out –waitfor (lldb) pro at -n a.out -w	(gdb) attach -waitfor a.out
Do a source level single step in the currently selected thread.
(lldb) thread step-in (lldb) step (lldb) s	(gdb) step (gdb) s
Do a source level single step over in the currently selected thread.
(lldb) thread step-over (lldb) next (lldb) n	(gdb) next (gdb) n
Do an instruction level single step in the currently selected thread.
(lldb) thread step-inst (lldb) si	(gdb) stepi (gdb) si
Do an instruction level single step over in the currently selected thread.
(lldb) thread step-inst-over (lldb) ni	(gdb) nexti (gdb) ni
Step out of the currently selected frame.
(lldb) thread step-out (lldb) finish	(gdb) finish
Backtrace and disassemble every time you stop.
(lldb) target stop-hook add Enter your stop hook command(s). Type ‘DONE’ to end. > bt > disassemble –pc > DONE Stop hook #1 added.

 

断点类命令集

LLDB	GDB
Set a breakpoint at all functions named main.
(lldb) breakpoint set –name main (lldb) br s -n main (lldb) b main	(gdb) break main
Set a breakpoint in file test.c at line 12.
(lldb) breakpoint set –file test.c –line 12 (lldb) br s -f test.c -l 12 (lldb) b test.c:12	(gdb) break test.c:12
Set a breakpoint at all C++ methods whose basename is main.
(lldb) breakpoint set –method main (lldb) br s -M main	(gdb) break main (Hope that there are no C funtions named main).
Set a breakpoint at and object C function: -[NSString stringWithFormat:].
(lldb) breakpoint set –name “-[NSString stringWithFormat:]” (lldb) b -[NSString stringWithFormat:]	(gdb) break -[NSString stringWithFormat:]
Set a breakpoint at all Objective C methods whose selector is count.
(lldb) breakpoint set –selector count (lldb) br s -S count	(gdb) break count (Hope that there are no C or C++ funtions namedcount).
List all breakpoints.
(lldb) breakpoint list (lldb) br l	(gdb) info break
Delete a breakpoint.
(lldb) breakpoint delete 1 (lldb) br del 1	(gdb) delete 1

 

监视点（WATCHPOINT）命令集

LLDB	GDB
Set a watchpoint on a variable when it is written to.
(lldb) watchpoint set variable -w write global_var (lldb) watch set var -w write global_var	(gdb) watch global_var
Set a watchpoint on a memory location when it is written into. The size of the region to watch for defaults to the pointer size if no ‘-x byte_size’ is specified. This command takes raw input, evaluated as an expression returning an unsigned integer pointing to the start of the region, after the ‘–’ option terminator.
(lldb) watchpoint set expression -w write — my_ptr (lldb) watch set exp -w write — my_ptr	(gdb) watch -location g_char_ptr
Set a condition on a watchpoint.
(lldb) watch set var -w write global (lldb) watchpoint modify -c ‘(global==5)’ (lldb) c … (lldb) bt * thread #1: tid = 0x1c03, 0x0000000100000ef5 a.outmodify + 21 at main.cpp:16, stop reason = watchpoint 1 frame #0: 0x0000000100000ef5 a.outmodify + 21 at main.cpp:16 frame #1: 0x0000000100000eac a.outmain + 108 at main.cpp:25 frame #2: 0x00007fff8ac9c7e1 libdyld.dylibstart + 1 (lldb) frame var global (int32_t) global = 5
List all watchpoints.
(lldb) watchpoint list (lldb) watch l	(gdb) info break
Delete a watchpoint.
(lldb) watchpoint delete 1 (lldb) watch del 1	(gdb) delete 1

 

检查变量

LLDB	GDB
Show the arguments and local variables for the current frame.
(lldb) frame variable	(gdb) info args and (gdb) info locals
Show the local variables for the current frame.
(lldb) frame variable –no-args (lldb) fr v -a	(gdb) info locals
Show the contents of local variable “bar”.
(lldb) frame variable bar (lldb) fr v bar (lldb) p bar	(gdb) p bar
Show the contents of local variable “bar” formatted as hex.
(lldb) frame variable –format x bar (lldb) fr v -f x bar	(gdb) p/x bar
Show the contents of global variable “baz”.
(lldb) target variable baz (lldb) ta v baz	(gdb) p baz
Show the global/static variables defined in the current source file.
(lldb) target variable (lldb) ta v	n/a
Display a the variable “argc” and “argv” every time you stop.
(lldb) target stop-hook add –one-liner “frame variable argc argv” (lldb) ta st a -o “fr v argc argv” (lldb) display argc (lldb) display argv	(gdb) display argc (gdb) display argv
Display a the variable “argc” and “argv” only when you stop in the function named main.
(lldb) target stop-hook add –name main –one-liner “frame variable argc argv” (lldb) ta st a -n main -o “fr v argc argv”
Display the variable “*this” only when you stop in c class named MyClass.
(lldb) target stop-hook add –classname MyClass –one-liner “frame variable *this” (lldb) ta st a -c MyClass -o “fr v *this”

 

检查线程状态

LLDB	GDB
Show the stack backtrace for the current thread.
(lldb) thread backtrace (lldb) bt	(gdb) bt
Show the stack backtraces for all threads.
(lldb) thread backtrace all (lldb) bt all	(gdb) thread apply all bt
Select a different stack frame by index for the current thread.
(lldb) frame select 12	(gdb) frame 12
List information about the currently selected frame in the current thread.
(lldb) frame info
Select the stack frame that called the current stack frame.
(lldb) up (lldb) frame select –relative=1	(gdb) up
Select the stack frame that is called by the current stack frame.
(lldb) down (lldb) frame select –relative=-1 (lldb) fr s -r-1	(gdb) down
Select a different stack frame using a relative offset.
(lldb) frame select –relative 2 (lldb) fr s -r2  (lldb) frame select –relative -3 (lldb) fr s -r-3	(gdb) up 2 (gdb) down 3
Show the general purpose registers for the current thread.
(lldb) register read	(gdb) info registers
Show the general purpose registers for the current thread formatted as signed decimal. LLDB tries to use the same format characters as printf(3) when possible. Type “help format” to see the full list of format specifiers.
(lldb) register read –format i (lldb) re r -f i  LLDB now supports the GDB shorthand format syntax but there can’t be space after the command: (lldb) register read/d
Show all registers in all register sets for the current thread.
(lldb) register read –all (lldb) re r -a	(gdb) info all-registers
Show the values for the registers named “rax”, “rsp” and “rbp” in the current thread.
(lldb) register read rax rsp rbp	(gdb) info all-registers rax rsp rbp
Show the values for the register named “rax” in the current thread formatted as binary.
(lldb) register read –format binary rax (lldb) re r -f b rax  LLDB now supports the GDB shorthand format syntax but there can’t be space after the command: (lldb) register read/t rax (lldb) p/t $rax	(gdb) p/t $rax
Read memory from address 0xbffff3c0 and show 4 hex uint32_t values.
(lldb) memory read –size 4 –format x –count 4 0xbffff3c0 (lldb) me r -s4 -fx -c4 0xbffff3c0 (lldb) x -s4 -fx -c4 0xbffff3c0  LLDB now supports the GDB shorthand format syntax but there can’t be space after the command: (lldb) memory read/4xw 0xbffff3c0 (lldb) x/4xw 0xbffff3c0 (lldb) memory read –gdb-format 4xw 0xbffff3c0	(gdb) x/4xw 0xbffff3c0
Read memory starting at the expression “argv[0]“.
(lldb) memory read argv[0] NOTE: any command can inline a scalar expression result (as long as the target is stopped) using backticks around any expression: (lldb) memory read –size sizeof(int) argv[0]	(gdb) x argv[0]
Read 512 bytes of memory from address 0xbffff3c0 and save results to a local file as text.
(lldb) memory read –outfile /tmp/mem.txt –count 512 0xbffff3c0 (lldb) me r -o/tmp/mem.txt -c512 0xbffff3c0 (lldb) x/512bx -o/tmp/mem.txt 0xbffff3c0	(gdb) set logging on (gdb) set logging file /tmp/mem.txt (gdb) x/512bx 0xbffff3c0 (gdb) set logging off
Save binary memory data starting at 0×1000 and ending at 0×2000 to a file.
(lldb) memory read –outfile /tmp/mem.bin –binary 0×1000 0×1200 (lldb) me r -o /tmp/mem.bin -b 0×1000 0×1200
(gdb) dump memory /tmp/mem.bin 0×1000 0×2000
Disassemble the current function for the current frame.
(lldb) disassemble –frame (lldb) di -f	(gdb) disassemble
Disassemble any functions named main.
(lldb) disassemble –name main (lldb) di -n main	(gdb) disassemble main
Disassemble an address range.
(lldb) disassemble –start-address 0x1eb8 –end-address 0x1ec3 (lldb) di -s 0x1eb8 -e 0x1ec3	(gdb) disassemble 0x1eb8 0x1ec3
Disassemble 20 instructions from a given address.
(lldb) disassemble –start-address 0x1eb8 –count 20 (lldb) di -s 0x1eb8 -c 20	(gdb) x/20i 0x1eb8
Show mixed source and disassembly for the current function for the current frame.
(lldb) disassemble –frame –mixed (lldb) di -f -m	n/a
Disassemble the current function for the current frame and show the opcode bytes.
(lldb) disassemble –frame –bytes (lldb) di -f -b	n/a
Disassemble the current source line for the current frame.
(lldb) disassemble –line (lldb) di -l	n/a

 

可执行文件和共享库查询命令

LLDB	GDB
List the main executable and all dependent shared libraries.
(lldb) image list	(gdb) info shared
Lookup information for a raw address in the executable or any shared libraries.
(lldb) image lookup –address 0x1ec4 (lldb) im loo -a 0x1ec4	(gdb) info symbol 0x1ec4
Lookup information for an address in a.out only.
(lldb) image lookup –address 0x1ec4 a.out (lldb) im loo -a 0x1ec4 a.out
Lookup information for for a type Point by name.
(lldb) image lookup –type Point (lldb) im loo -t Point	(lldb) ptype Point
Dump all sections from the main executable and any shared libraries.
(lldb) image dump sections	(gdb) maintenance info sections
Dump all sections in the a.out module.
(lldb) image dump sections a.out
Dump all symbols from the main executable and any shared libraries.
(lldb) image dump symtab
Dump all symbols in a.out and liba.so.
(lldb) image dump symtab a.out liba.so

 

杂项

LLDB	GDB
Echo text to the screen.
(lldb) script print “Here is some text”	(gdb) echo Here is some text\n