virtio pci设备基础

这段时间又再次revisit了一把virtio,把笔记整理一下贴出来,大部分内容都是网上找的,+上我个人的一些理解在里面


我们首先关注virtio设备的配置空间,virtio设备本身是基于PCI总线的,因此本质上就是一个PCI设备,和所有其他PCI设备一样,virtio也有自己的vendor ID 0x1AF4,device ID从0x1000 - 0x103F,subsystem device ID如下:

Subsystem Device ID Virtio Device
1 Network card
2 Block device
3 Console
4 Entropy source
5 Memory ballooning
6 IoMemory
7 Rpmsg
8 SCSI host
9 9P transport
10 Mac80211 wlan

virtio设备的第一块IO region(BAR0指向的空间?)用来存放virtio设备的配置空间,如下所示:

Bits 32 32 32 16 16 16 8 8
R/W R R+W R+W R R+W R+W R+W R
Purpose Device Features Guest
Features
Queue
Address
Queue
Size
Queue Select Queue Notify Device Status ISR Status

Bits 16 16
R/W R+W R+W
Purpose(MSI-X) Configuration Vector Queue Vector

如果配置空间包含了后面两个域,即CONFIG_VECTOR以及QUEUE_VECTOR,表明这个PCI设备开启了MSI-X中断,否则后面两个域不会在配置空间中。内核定义了一个VIRTIO_PCI_CONFIG宏,用于计算配置空间的大小,如果开启了MSI-X中断则是24字节,否则是20字节

/* The remaining space is defined by each driver as the per-driver
 * configuration space */
#define VIRTIO_PCI_CONFIG(dev)      ((dev)->msix_enabled ? 24 : 20)

可以从内核include/linux/virtio_pci.h中找到virtio配置空间的定义代码

/* A 32-bit r/o bitmask of the features supported by the host */
#define VIRTIO_PCI_HOST_FEATURES    0

/* A 32-bit r/w bitmask of features activated by the guest */
#define VIRTIO_PCI_GUEST_FEATURES   4

/* A 32-bit r/w PFN for the currently selected queue */
#define VIRTIO_PCI_QUEUE_PFN        8

/* A 16-bit r/o queue size for the currently selected queue */
#define VIRTIO_PCI_QUEUE_NUM        12

/* A 16-bit r/w queue selector */
#define VIRTIO_PCI_QUEUE_SEL        14

/* A 16-bit r/w queue notifier */
#define VIRTIO_PCI_QUEUE_NOTIFY     16

/* An 8-bit device status register.  */
#define VIRTIO_PCI_STATUS       18

/* An 8-bit r/o interrupt status register.  Reading the value will return the
 * current contents of the ISR and will also clear it.  This is effectively
 * a read-and-acknowledge. */
#define VIRTIO_PCI_ISR          19

/* The bit of the ISR which indicates a device configuration change. */
#define VIRTIO_PCI_ISR_CONFIG       0x2

/* MSI-X registers: only enabled if MSI-X is enabled. */
/* A 16-bit vector for configuration changes. */
#define VIRTIO_MSI_CONFIG_VECTOR        20
/* A 16-bit vector for selected queue notifications. */
#define VIRTIO_MSI_QUEUE_VECTOR         22
/* Vector value used to disable MSI for queue */
#define VIRTIO_MSI_NO_VECTOR            0xffff
在24/20字节之后,会存放设备自己的配置域,这里就不展开了


关于PCI的规范和细节,可以参考如下的文章

http://blog.chinaunix.net/uid-618506-id-204331.html

http://blog.sina.com.cn/s/blog_6472c4cc0100qnht.html

http://blog.csdn.net/yayong/article/details/4013299


按照我的理解,这里virtio设备的配置空间,和PCI设备的配置空间是完全不同的概念,virtio自己的配置实际上是占用的bar0指向的一块IO区域来完成的。对于传统的PCI设备,其配置空间是通过PCI规范严格定义好的,目前对于普通PCI设备是256个字节,对于PCIE设备是2k个字节,其中前64个字节称为PCI配置空间头,其定义如下

register (offset) bits 31-24 bits 23-16 bits 15-8 bits 7-0
00 Device ID Vendor ID
04 Status Command
08 Class code Subclass Prog IF Revision ID
0C BIST Header type Latency Timer Cache Line Size
10 Base address #0 (BAR0)
14 Base address #1 (BAR1)
18 Secondary Latency Timer Subordinate Bus Number Secondary Bus Number Primary Bus Number
1C Secondary Status I/O Limit I/O Base
20 Memory Limit Memory Base
24 Prefetchable Memory Limit Prefetchable Memory Base
28 Prefetchable Base Upper 32 Bits
2C Prefetchable Limit Upper 32 Bits
30 I/O Limit Upper 16 Bits I/O Base Upper 16 Bits
34 Reserved Capability Pointer
38 Expansion ROM base address
3C Bridge Control Interrupt PIN Interrupt Line


pci设备的配置空间可以通过pio或者mmio来访问,其中pio主要用于系统启动时的pci设备枚举,x86会有专门的寄存器来定义如何枚举,请参考相关资料。


host/guest的feature bits需要host和guest通过协商确定,相关的feature bit是根据具体的virtio设备不同而不同的,e.g. virtio_net, virtio_blk, virtio_balloon都有自己特定的feature bit,同时28-31位的feature bit被virtio_ring用来做同步

/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
 * transport being used (eg. virtio_ring), the rest are per-device feature
 * bits. */
#define VIRTIO_TRANSPORT_F_START    28
#define VIRTIO_TRANSPORT_F_END      32

目前用到的transport features,是VIRTIO_RING_F_INDIRECT_DESC, VIRTIO_RING_F_EVENT_IDX


device status目前有如下几类

/* Status byte for guest to report progress, and synchronize features. */
/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1
/* We have found a driver for the device. */
#define VIRTIO_CONFIG_S_DRIVER      2
/* Driver has used its parts of the config, and is happy */
#define VIRTIO_CONFIG_S_DRIVER_OK   4
/* We've given up on this device. */
#define VIRTIO_CONFIG_S_FAILED      0x80

对于设备的操作都在virtio_config_ops里面,其定义如下

static struct virtio_config_ops virtio_pci_config_ops = {
    .get        = vp_get,
    .set        = vp_set,
    .get_status = vp_get_status,
    .set_status = vp_set_status,
    .reset      = vp_reset,
    .find_vqs   = vp_find_vqs,
    .del_vqs    = vp_del_vqs,
    .get_features   = vp_get_features,
    .finalize_features = vp_finalize_features,
};

vp_get, vp_set最终都是通过ioread/iowrite操作来读取pci总线地址,这两个函数目前都是对于设备自己的配置做一些读写操作,因此都是在VIRTIO_PCI_CONFIG之后的空间进行

/* virtio config->get() implementation */
static void vp_get(struct virtio_device *vdev, unsigned offset,
           void *buf, unsigned len)
{
    struct virtio_pci_device *vp_dev = to_vp_device(vdev);
    void __iomem *ioaddr = vp_dev->ioaddr +
                VIRTIO_PCI_CONFIG(vp_dev) + offset;
    u8 *ptr = buf;
    int i;

    for (i = 0; i < len; i++)
        ptr[i] = ioread8(ioaddr + i);
}
/* the config->set() implementation.  it's symmetric to the config->get()
 * implementation */
static void vp_set(struct virtio_device *vdev, unsigned offset,
           const void *buf, unsigned len)
{
    struct virtio_pci_device *vp_dev = to_vp_device(vdev);
    void __iomem *ioaddr = vp_dev->ioaddr +
                VIRTIO_PCI_CONFIG(vp_dev) + offset;
    const u8 *ptr = buf;
    int i;

    for (i = 0; i < len; i++)
        iowrite8(ptr[i], ioaddr + i);
}

vp_get_status, vp_set_status用于读写设备状态,由于device status总共只有1个字节,因此只需要一次ioread8/iowrite8即可。而vp_reset相当于把VIRTIO_PCI_STATUS写入0

/* config->{get,set}_status() implementations */
static u8 vp_get_status(struct virtio_device *vdev)
{
    struct virtio_pci_device *vp_dev = to_vp_device(vdev);
    return ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
}

static void vp_set_status(struct virtio_device *vdev, u8 status)
{
    struct virtio_pci_device *vp_dev = to_vp_device(vdev);
    /* We should never be setting status to 0. */
    BUG_ON(status == 0);
    iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
}
static void vp_reset(struct virtio_device *vdev)
{
    struct virtio_pci_device *vp_dev = to_vp_device(vdev);
    /* 0 status means a reset. */
    iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
}

vp_get_features, vp_finalize_features也类似,由于features是32bit的,因此调用ioread32/iowrite32来实现,vp_get_features用于获取host feature,因此会读取VIRTIO_PCI_HOST_FEATURES,vp_finalize_features用于配置guest features


virtio pci设备同样需要按照系统通用的pci初始化方式注册,初始化时调用pci_register_driver,结束时调用pci_unregister_driver

static struct pci_driver virtio_pci_driver = {
    .name       = "virtio-pci",
    .id_table   = virtio_pci_id_table,
    .probe      = virtio_pci_probe,
    .remove     = virtio_pci_remove,
#ifdef CONFIG_PM
    .driver.pm  = &virtio_pci_pm_ops,
#endif
};

static int __init virtio_pci_init(void)
{
    return pci_register_driver(&virtio_pci_driver);
}

module_init(virtio_pci_init);

static void __exit virtio_pci_exit(void)
{
    pci_unregister_driver(&virtio_pci_driver);
}

module_exit(virtio_pci_exit);


下面来看看virtqueue,在virtio的机制中,前端和后端通过virtqueue来进行数据交换,virtqueue的初始化通过config->find_vqs来进行

static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
               struct virtqueue *vqs[],
               vq_callback_t *callbacks[],
               const char *names[])
{
    int err;

    /* Try MSI-X with one vector per queue. */
    err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names, true, true);
    if (!err)
        return 0;
    /* Fallback: MSI-X with one vector for config, one shared for queues. */
    err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
                 true, false);
    if (!err)
        return 0;
    /* Finally fall back to regular interrupts. */
    return vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
                  false, false);
}
可以看到vp_find_vqs是依次尝试不同的中断模式,具体实现都在函数vp_try_to_find_vqs里面,该函数由三个不同分支组成

1. 如果没有开启msix模式,则调用vp_request_intx申请一个中断,中断处理函数是vp_interrupt

    if (!use_msix) {
        /* Old style: one normal interrupt for change and all vqs. */
        err = vp_request_intx(vdev);
        if (err)
            goto error_request;
    } else {

vp_interrupt实际调用的是vp_vring_interrupt(配置变更的中断除外)

static irqreturn_t vp_interrupt(int irq, void *opaque)
{
    struct virtio_pci_device *vp_dev = opaque;
    u8 isr;

    /* reading the ISR has the effect of also clearing it so it's very
     * important to save off the value. */
    isr = ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);

    /* It's definitely not us if the ISR was not high */
    if (!isr)
        return IRQ_NONE;

    /* Configuration change?  Tell driver if it wants to know. */
    if (isr & VIRTIO_PCI_ISR_CONFIG)
        vp_config_changed(irq, opaque);

    return vp_vring_interrupt(irq, opaque);
}
vp_vring_interrupt会遍历virtio_pci_device的所有virtqueue(多个队列的设备),调用中断处理函数vring_interrupt,最终调用virtqueue注册的callback函数完成中断处理

irqreturn_t vring_interrupt(int irq, void *_vq)
{
    struct vring_virtqueue *vq = to_vvq(_vq);

    if (!more_used(vq)) {
        pr_debug("virtqueue interrupt with no work for %p\n", vq);
        return IRQ_NONE;
    }

    if (unlikely(vq->broken))
        return IRQ_HANDLED;

    pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
    if (vq->vq.callback)
        vq->vq.callback(&vq->vq);

    return IRQ_HANDLED;
}

2. 开启了msix模式,还要区分不同的模式,要么是所有virtqueue共享一个中断,要么是每个virtqueue独立一个中断,无论是哪种模式,都需要调用vp_request_msix_vectors去申请irq中断资源。还要对每个virtqueue,调用setup_vq来完成初始化

vp_request_msix_vectors用于申请nvectors个中断,其中至少有一个config changed中断,处理函数为vp_config_changed,其余如果是共享模式,则所有队列共享一个msix中断,中断处理函数是vp_vring_interrupt

    } else {
        if (per_vq_vectors) {
            /* Best option: one for change interrupt, one per vq. */
            nvectors = 1;
            for (i = 0; i < nvqs; ++i)
                if (callbacks[i])
                    ++nvectors;
        } else {
            /* Second best: one for change, shared for all vqs. */
            nvectors = 2;
        }

        err = vp_request_msix_vectors(vdev, nvectors, per_vq_vectors);
        if (err)
            goto error_request;
    }

对于每个virtqueue,都会调用setup_vq初始化对应的virtqueue,同时如果是per-vq中断的模式,还会调用request_irq分配中断资源,中断处理函数是vring_interrupt

    vp_dev->per_vq_vectors = per_vq_vectors;
    allocated_vectors = vp_dev->msix_used_vectors;
    for (i = 0; i < nvqs; ++i) {
        if (!callbacks[i] || !vp_dev->msix_enabled)
            msix_vec = VIRTIO_MSI_NO_VECTOR;
        else if (vp_dev->per_vq_vectors)
            msix_vec = allocated_vectors++;
        else
            msix_vec = VP_MSIX_VQ_VECTOR;
        vqs[i] = setup_vq(vdev, i, callbacks[i], names[i], msix_vec);
        if (IS_ERR(vqs[i])) {
            err = PTR_ERR(vqs[i]);
            goto error_find;
        }

        if (!vp_dev->per_vq_vectors || msix_vec == VIRTIO_MSI_NO_VECTOR)
            continue;

        /* allocate per-vq irq if available and necessary */
        snprintf(vp_dev->msix_names[msix_vec],
             sizeof *vp_dev->msix_names,
             "%s-%s",
             dev_name(&vp_dev->vdev.dev), names[i]);
        err = request_irq(vp_dev->msix_entries[msix_vec].vector,
                  vring_interrupt, 0,
                  vp_dev->msix_names[msix_vec],
                  vqs[i]);
        if (err) {
            vp_del_vq(vqs[i]);
            goto error_find;
        }
    }
    return 0;

其中setup_vq的函数如下:

static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index,
                  void (*callback)(struct virtqueue *vq),
                  const char *name,
                  u16 msix_vec)
{
    struct virtio_pci_device *vp_dev = to_vp_device(vdev);
    struct virtio_pci_vq_info *info;
    struct virtqueue *vq;
    unsigned long flags, size;
    u16 num;
    int err;

    /* Select the queue we're interested in */ /* 把要配置的queue的index写入配置空间地址 */
    iowrite16(index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);

    /* Check if queue is either not available or already active. */ /* num=0说明queue不可用,否则说明地址非空,已经被占用了 */
    num = ioread16(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NUM);
    if (!num || ioread32(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN))
        return ERR_PTR(-ENOENT);

    /* allocate and fill out our structure the represents an active
     * queue */
    info = kmalloc(sizeof(struct virtio_pci_vq_info), GFP_KERNEL);
    if (!info)
        return ERR_PTR(-ENOMEM);

    info->queue_index = index;  /* 队列index */
    info->num = num; /* vring size, vring_desc个数 */
    info->msix_vector = msix_vec;

    size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
    info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO); /* vring分配空间 */
    if (info->queue == NULL) {
        err = -ENOMEM;
        goto out_info;
    }

    /* activate the queue */ /* 把vring的地址写入pci配置空间,触发trap使得qemu可以通知到 */
    iowrite32(virt_to_phys(info->queue) >> VIRTIO_PCI_QUEUE_ADDR_SHIFT,
          vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);

    /* create the vring */ /* 创建vring_virqueue,把vring封装在virtqueue里面 */
    vq = vring_new_virtqueue(info->num, VIRTIO_PCI_VRING_ALIGN,
                 vdev, info->queue, vp_notify, callback, name);
    if (!vq) {
        err = -ENOMEM;
        goto out_activate_queue;
    }

    vq->priv = info; /* virtqueue->priv指向virtio_pci_vq_info */
    info->vq = vq; /* virtio_pci_vq_info->vq指向新创建的virtqueue */

    if (msix_vec != VIRTIO_MSI_NO_VECTOR) {
        iowrite16(msix_vec, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
        msix_vec = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
        if (msix_vec == VIRTIO_MSI_NO_VECTOR) {
            err = -EBUSY;
            goto out_assign;
        }
    }

    spin_lock_irqsave(&vp_dev->lock, flags);
    list_add(&info->node, &vp_dev->virtqueues);
    spin_unlock_irqrestore(&vp_dev->lock, flags);

    return vq;

out_assign:
    vring_del_virtqueue(vq);
out_activate_queue:
    iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
    free_pages_exact(info->queue, size);
out_info:
    kfree(info);
    return ERR_PTR(err);
}



你可能感兴趣的:(virtio pci设备基础)