DiskSim 4.0 with dixtrac 安装

1、Install bison and flex, if you have not installed already.
$ sudo apt-get install bison flex 

2、Download and unzip.Sources can be downloaded from http://www.pdl.cmu.edu/DiskSim/.I downloaded DiskSim 4.0 with dixtrac. 

$ tar xfz disksim-4.0-with-dixtrac.tar.gz 
$ cd disksim-4.0 
$ unzip ../ssd-add-on.zip 

3、Apply SSD add on patch.

$ patch -p1 < ssdmodel/ssd-patch

4、. Append SSD model library path to dixtrac.

add these lines to dixtrac/.paths
# path to ssdmodel
export SSDMODEL_PREFIX=../ssdmodel
export SSDMODEL_INCL=$(SSDMODEL_PREFIX)/include
export SSDMODEL_CFLAGS=-I$(SSDMODEL_INCL)
export SSDMODEL_LDPATH=$(SSDMODEL_PREFIX)/lib
export SSDMODEL_LDFLAGS=-L$(SSDMODEL_LDPATH) -lssdmodel

modify dixtrac/Makefile like this :

$(LIBDISKSIM_LDFLAGS) \
$(MEMSMODEL_LDFLAGS) \
$(DISKMODEL_LDFLAGS) \
$(SSDMODEL_LDFLAGS) \
$(LIBPARAM_LDFLAGS) \
$(LIBDDBG_LDFLAGS) \
$(ST_LDFLAGS)


CFLAGS = -Wall -g -MD -I. $(DEFINES) -I$(STHREADS) $(DMINCLUDES) \
$(LIBDISKSIM_CFLAGS) \
$(DISKMODEL_CFLAGS) $(LIBPARAM_CFLAGS) $(LIBDDBG_CFLAGS) \
$(SSDMODEL_CFLAGS)

5、Compile~~~!

$ make

6、Check if it works well.
$ cd valid; ./runvalid
$ chmod a+x ../ssdmodel/valid/runvalid
$ cd ../ssdmodel/valid; ./runvalid

Ok. It is all.