CentOS 安装温度监控 lm_sensors
#yum install lm_sensors
#sensors-dectect
发现启动失败，主要是因为需要依赖内核模块 coretemp
#modprobe coretemp
#uname -a
Linux 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:08:30 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
找到内核版本号，原来只有 2.6.22 才内置了该模块。
Google找到一个可用模块
wget http://www.cs.vsu.ru/~raskhozhev/files/dkms-coretemp-1.00-1.noarch.rpm
下载后安装即可。
[root@server neil]# modinfo coretemp
bash: modinfo: command not found
[root@server neil]# /sbin/modinfo coretemp
filename: /lib/modules/2.6.18-194.3.1.el5/extra/coretemp.ko
license: GPL
description: Intel Core temperature monitor
author: Rudolf Marek <[email protected]>
srcversion: ACC9B44AC9ED676294B7A11
depends: hwmon
vermagic: 2.6.18-194.3.1.el5 SMP mod_unload gcc-4.1
[root@server neil]# /usr/sbin/sensors-detect
按照提示确定即可。
[root@server neil]# sensors
it8718-isa-0290
Adapter: ISA adapter
in0: +1.10 V (min = +0.00 V, max = +4.08 V)
in1: +1.97 V (min = +0.00 V, max = +4.08 V)
in2: +3.36 V (min = +0.00 V, max = +4.08 V)
in3: +2.99 V (min = +0.00 V, max = +4.08 V)
in4: +0.29 V (min = +0.00 V, max = +4.08 V)
in5: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
in6: +1.23 V (min = +0.00 V, max = +4.08 V)
in7: +3.04 V (min = +0.00 V, max = +4.08 V)
in8: +3.30 V
fan1: 1328 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +30¡ãC (low = +127¡ãC, high = +127¡ãC) sensor = thermistor
temp2: +19¡ãC (low = +127¡ãC, high = +127¡ãC) sensor = diode
temp3: -2¡ãC (low = +127¡ãC, high = +127¡ãC) sensor = thermistor
vid: +2.050 V
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +44¡ãC (high = +100¡ãC)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +41¡ãC (high = +100¡ãC)
coretemp-isa-0002
Adapter: ISA adapter
Core 2: +40¡ãC (high = +100¡ãC)
coretemp-isa-0003
Adapter: ISA adapter
Core 3: +43¡ãC (high = +100¡ãC)