Android View深入学习（一），View的测量（Measure）过程

Android应用上面的View显示出来都必须经过测量，布局，和绘制这三个过程。我们知道PhoneWindow中的DecorView是界面最顶层的View，那么，最先绘制的View肯定是DecorView。在ViewRootImpl中的performTraversals方法中中，依次对DecorView进行测量，布局，和绘制：

 private void performTraversals() {
    ...
    performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);
    ...
    performLayout(lp, desiredWindowWidth, desiredWindowHeight);
    ...
    performDraw();
    ... 
}

最先开始对DecorView进行测量，然后对其子View进行测量，一直到最上层的View，直到所有的View都测量完毕。在ViewRootImpl中对DecorView进行测量时，调用的是performMeasure方法：

private void performMeasure(int childWidthMeasureSpec, int childHeightMeasureSpec) {
        Trace.traceBegin(Trace.TRACE_TAG_VIEW, "measure");
        try {
            mView.measure(childWidthMeasureSpec, childHeightMeasureSpec);
        } finally {
            Trace.traceEnd(Trace.TRACE_TAG_VIEW);
        }
    }

在performMeasure方法里面，调用了View的measure方法:

public final void measure(int widthMeasureSpec, int heightMeasureSpec) {
        boolean optical = isLayoutModeOptical(this);
        if (optical != isLayoutModeOptical(mParent)) {
            Insets insets = getOpticalInsets();
            int oWidth  = insets.left + insets.right;
            int oHeight = insets.top  + insets.bottom;
            widthMeasureSpec  = MeasureSpec.adjust(widthMeasureSpec,  optical ? -oWidth  : oWidth);
            heightMeasureSpec = MeasureSpec.adjust(heightMeasureSpec, optical ? -oHeight : oHeight);
        }

        // Suppress sign extension for the low bytes
        long key = (long) widthMeasureSpec << 32 | (long) heightMeasureSpec & 0xffffffffL;
        if (mMeasureCache == null) mMeasureCache = new LongSparseLongArray(2);

        final boolean forceLayout = (mPrivateFlags & PFLAG_FORCE_LAYOUT) == PFLAG_FORCE_LAYOUT;
        final boolean isExactly = MeasureSpec.getMode(widthMeasureSpec) == MeasureSpec.EXACTLY &&
                MeasureSpec.getMode(heightMeasureSpec) == MeasureSpec.EXACTLY;
        final boolean matchingSize = isExactly &&
                getMeasuredWidth() == MeasureSpec.getSize(widthMeasureSpec) &&
                getMeasuredHeight() == MeasureSpec.getSize(heightMeasureSpec);
        if (forceLayout || !matchingSize &&
                (widthMeasureSpec != mOldWidthMeasureSpec ||
                        heightMeasureSpec != mOldHeightMeasureSpec)) {

            // first clears the measured dimension flag
            mPrivateFlags &= ~PFLAG_MEASURED_DIMENSION_SET;

            resolveRtlPropertiesIfNeeded();

            int cacheIndex = forceLayout ? -1 : mMeasureCache.indexOfKey(key);
            if (cacheIndex < 0 || sIgnoreMeasureCache) {
                // measure ourselves, this should set the measured dimension flag back
                onMeasure(widthMeasureSpec, heightMeasureSpec);
                mPrivateFlags3 &= ~PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
            } else {
                long value = mMeasureCache.valueAt(cacheIndex);
                // Casting a long to int drops the high 32 bits, no mask needed
                setMeasuredDimensionRaw((int) (value >> 32), (int) value);
                mPrivateFlags3 |= PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
            }

            // flag not set, setMeasuredDimension() was not invoked, we raise
            // an exception to warn the developer
            if ((mPrivateFlags & PFLAG_MEASURED_DIMENSION_SET) != PFLAG_MEASURED_DIMENSION_SET) {
                throw new IllegalStateException("onMeasure() did not set the"
                        + " measured dimension by calling"
                        + " setMeasuredDimension()");
            }

            mPrivateFlags |= PFLAG_LAYOUT_REQUIRED;
        }

        mOldWidthMeasureSpec = widthMeasureSpec;
        mOldHeightMeasureSpec = heightMeasureSpec;

        mMeasureCache.put(key, ((long) mMeasuredWidth) << 32 |
                (long) mMeasuredHeight & 0xffffffffL); // suppress sign extension
    }

这个方法是final修饰，子类不能重写。在它的33行，调用了onMeasure(widthMeasureSpec, heightMeasureSpec)，找到onMeasure方法：

protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
        setMeasuredDimension(getDefaultSize(getSuggestedMinimumWidth(), widthMeasureSpec),
                getDefaultSize(getSuggestedMinimumHeight(), heightMeasureSpec));
    }

这个方法子类是可以重写的，DecorView重写了方法，并在里面调用 super.onMeasure(widthMeasureSpec, heightMeasureSpec)方法，DecorView继承自FrameLayout，那么会调用FrameLayout的onMeasure方法：

 protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
        int count = getChildCount();

        final boolean measureMatchParentChildren =
                MeasureSpec.getMode(widthMeasureSpec) != MeasureSpec.EXACTLY ||
                MeasureSpec.getMode(heightMeasureSpec) != MeasureSpec.EXACTLY;
        mMatchParentChildren.clear();

        int maxHeight = 0;
        int maxWidth = 0;
        int childState = 0;

        for (int i = 0; i < count; i++) {
            final View child = getChildAt(i);
            if (mMeasureAllChildren || child.getVisibility() != GONE) {
                measureChildWithMargins(child, widthMeasureSpec, 0, heightMeasureSpec, 0);
                final LayoutParams lp = (LayoutParams) child.getLayoutParams();
                maxWidth = Math.max(maxWidth,
                        child.getMeasuredWidth() + lp.leftMargin + lp.rightMargin);
                maxHeight = Math.max(maxHeight,
                        child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin);
                childState = combineMeasuredStates(childState, child.getMeasuredState());
                if (measureMatchParentChildren) {
                    if (lp.width == LayoutParams.MATCH_PARENT ||
                            lp.height == LayoutParams.MATCH_PARENT) {
                        mMatchParentChildren.add(child);
                    }
                }
            }
        }

        // Account for padding too
        maxWidth += getPaddingLeftWithForeground() + getPaddingRightWithForeground();
        maxHeight += getPaddingTopWithForeground() + getPaddingBottomWithForeground();

        // Check against our minimum height and width
        maxHeight = Math.max(maxHeight, getSuggestedMinimumHeight());
        maxWidth = Math.max(maxWidth, getSuggestedMinimumWidth());

        // Check against our foreground's minimum height and width
        final Drawable drawable = getForeground();
        if (drawable != null) {
            maxHeight = Math.max(maxHeight, drawable.getMinimumHeight());
            maxWidth = Math.max(maxWidth, drawable.getMinimumWidth());
        }

        setMeasuredDimension(resolveSizeAndState(maxWidth, widthMeasureSpec, childState),
                resolveSizeAndState(maxHeight, heightMeasureSpec,
                        childState << MEASURED_HEIGHT_STATE_SHIFT));

        count = mMatchParentChildren.size();
        if (count > 1) {
            for (int i = 0; i < count; i++) {
                final View child = mMatchParentChildren.get(i);

                final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
                int childWidthMeasureSpec;
                int childHeightMeasureSpec;

                if (lp.width == LayoutParams.MATCH_PARENT) {
                    childWidthMeasureSpec = MeasureSpec.makeMeasureSpec(getMeasuredWidth() -
                            getPaddingLeftWithForeground() - getPaddingRightWithForeground() -
                            lp.leftMargin - lp.rightMargin,
                            MeasureSpec.EXACTLY);
                } else {
                    childWidthMeasureSpec = getChildMeasureSpec(widthMeasureSpec,
                            getPaddingLeftWithForeground() + getPaddingRightWithForeground() +
                            lp.leftMargin + lp.rightMargin,
                            lp.width);
                }

                if (lp.height == LayoutParams.MATCH_PARENT) {
                    childHeightMeasureSpec = MeasureSpec.makeMeasureSpec(getMeasuredHeight() -
                            getPaddingTopWithForeground() - getPaddingBottomWithForeground() -
                            lp.topMargin - lp.bottomMargin,
                            MeasureSpec.EXACTLY);
                } else {
                    childHeightMeasureSpec = getChildMeasureSpec(heightMeasureSpec,
                            getPaddingTopWithForeground() + getPaddingBottomWithForeground() +
                            lp.topMargin + lp.bottomMargin,
                            lp.height);
                }

                child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
            }
        }
    }

13行遍历所有的子View，在16行调用了measureChildWithMargins方法在这个方法里面，调用child.measure(childWidthMeasureSpec, childHeightMeasureSpec)，开始DecorView子View的测量过程。就这样，一直往下调用，直到所有的View都完成了测量过程。整个过程的流程图如下所示：

测量完成了，那么View经过测量之后，得到什么？在FrameLayout的onMeasure方法的47行，调用了View的setMeasuredDimension方法，setMeasuredDimension里面调用setMeasuredDimensionRaw方法：

 private void setMeasuredDimensionRaw(int measuredWidth, int measuredHeight) {
        mMeasuredWidth = measuredWidth;
        mMeasuredHeight = measuredHeight;

        mPrivateFlags |= PFLAG_MEASURED_DIMENSION_SET;
    }

得到了测量宽度mMeasuredWidth和测量高度mMeasuredHeight。
从上面的分析可以得到，调用View的onMeasure方法可以得到View的测量宽度mMeasuredWidth和测量高度mMeasuredHeight，那这个mMeasuredWidth和mMeasuredHeight是根据什么算来的？ViewGroup的measureChildWithMargins方法负责测量子View：

protected void measureChildWithMargins(View child,
            int parentWidthMeasureSpec, int widthUsed,
            int parentHeightMeasureSpec, int heightUsed) {
        final MarginLayoutParams lp = (MarginLayoutParams) child
                .getLayoutParams();

        final int childWidthMeasureSpec = getChildMeasureSpec(
                parentWidthMeasureSpec, mPaddingLeft + mPaddingRight
                        + lp.leftMargin + lp.rightMargin + widthUsed, lp.width);
        final int childHeightMeasureSpec = getChildMeasureSpec(
                parentHeightMeasureSpec, mPaddingTop + mPaddingBottom
                        + lp.topMargin + lp.bottomMargin + heightUsed,
                lp.height);

        child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
    }

从第7行我们可以得知，调用ViewGroup的getChildMeasureSpec，传入三个参数，第一个是父View的widthMeasureSpec或者是heightMeasureSpec,第二个参数是父布局的Padding和子View的Margin之和，第三个参数是子View布局的大小类别（MATCH_PARENT，WRAP_CONTENT，或者是准确的大小）：

 public static int getChildMeasureSpec(int spec, int padding,
            int childDimension) {
        int specMode = MeasureSpec.getMode(spec);
        int specSize = MeasureSpec.getSize(spec);

        int size = Math.max(0, specSize - padding);

        int resultSize = 0;
        int resultMode = 0;

        switch (specMode) {
        // Parent has imposed an exact size on us
        case MeasureSpec.EXACTLY:
            if (childDimension >= 0) {
                resultSize = childDimension;
                resultMode = MeasureSpec.EXACTLY;
            } else if (childDimension == LayoutParams.MATCH_PARENT) {
                // Child wants to be our size. So be it.
                resultSize = size;
                resultMode = MeasureSpec.EXACTLY;
            } else if (childDimension == LayoutParams.WRAP_CONTENT) {
                // Child wants to determine its own size. It can't be
                // bigger than us.
                resultSize = size;
                resultMode = MeasureSpec.AT_MOST;
            }
            break;

        // Parent has imposed a maximum size on us
        case MeasureSpec.AT_MOST:
            if (childDimension >= 0) {
                // Child wants a specific size... so be it
                resultSize = childDimension;
                resultMode = MeasureSpec.EXACTLY;
            } else if (childDimension == LayoutParams.MATCH_PARENT) {
                // Child wants to be our size, but our size is not fixed.
                // Constrain child to not be bigger than us.
                resultSize = size;
                resultMode = MeasureSpec.AT_MOST;
            } else if (childDimension == LayoutParams.WRAP_CONTENT) {
                // Child wants to determine its own size. It can't be
                // bigger than us.
                resultSize = size;
                resultMode = MeasureSpec.AT_MOST;
            }
            break;

        // Parent asked to see how big we want to be
        case MeasureSpec.UNSPECIFIED:
            if (childDimension >= 0) {
                // Child wants a specific size... let him have it
                resultSize = childDimension;
                resultMode = MeasureSpec.EXACTLY;
            } else if (childDimension == LayoutParams.MATCH_PARENT) {
                // Child wants to be our size... find out how big it should
                // be
                resultSize = 0;
                resultMode = MeasureSpec.UNSPECIFIED;
            } else if (childDimension == LayoutParams.WRAP_CONTENT) {
                // Child wants to determine its own size.... find out how
                // big it should be
                resultSize = 0;
                resultMode = MeasureSpec.UNSPECIFIED;
            }
            break;
        }
        return MeasureSpec.makeMeasureSpec(resultSize, resultMode);
    }

从上面分析可以得出：子View的widthMeasureSpec和heightMeasureSpec是由父View的widthMeasureSpec和heightMeasureSpec，LayoutParams和子ViewMarginLayoutParams决定的，那么最顶层的DecorView的测量宽度和测量高度是由什么决定的？
在调用performMeasure的前面：

                    int childWidthMeasureSpec = getRootMeasureSpec(mWidth, lp.width);
                    int childHeightMeasureSpec = getRootMeasureSpec(mHeight, lp.height);               
                     // Ask host how big it wants to be
                    performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);

从上面可以得知DecorView的测量宽度和测量高度是通过getRootMeasureSpec方法得到的：

 private static int getRootMeasureSpec(int windowSize, int rootDimension) {
        int measureSpec;
        switch (rootDimension) {

        case ViewGroup.LayoutParams.MATCH_PARENT:
            // Window can't resize. Force root view to be windowSize.
            measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.EXACTLY);
            break;
        case ViewGroup.LayoutParams.WRAP_CONTENT:
            // Window can resize. Set max size for root view.
            measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.AT_MOST);
            break;
        default:
            // Window wants to be an exact size. Force root view to be that size.
            measureSpec = MeasureSpec.makeMeasureSpec(rootDimension, MeasureSpec.EXACTLY);
            break;
        }
        return measureSpec;
    }

从上面得知，DecorView的测量宽度和测量高度是由windowSize（窗口的大小）和WindowManager.LayoutParams决定的。