SetTextureStageState

ID3DXEffectStateManager::SetTextureStageState 这个函数有一大堆的参数：

HRESULT SetTextureStageState(      

    DWORD Stage,
    D3DTEXTURESTAGESTATETYPE Type,
    DWORD Value
);

Stage：这个参数是指第几层纹理，0.1.2.3...， 这个版本的dx9(Feb,2005)的SDK中说最多支持8层（Stage identifier of the texture for which the state value is set. Stage identifiers are zero-based. Devices can have up to eight set textures, so the maximum value allowed for Stage is 7. )
Type：定义对该纹理的哪个属进行设置，值很多。。。
Value: 指的是前面所选属性的值

 

Type：

typedef enum _D3DTEXTURESTAGESTATETYPE {

    D3DTSS_COLOROP = 1, //颜色的运算这里的op 是operations，指对前面设置的颜色进行运算既后面的2个type：D3DTSS_COLORARG1,D3DTSS_COLORARG2或D3DTSS_ALPHAARG1，D3DTSS_ALPHAARG2 = 6

    D3DTSS_COLORARG1 = 2,

    D3DTSS_COLORARG2 = 3,

    D3DTSS_ALPHAOP = 4, //alpha通道的运算

    D3DTSS_ALPHAARG1 = 5,

    D3DTSS_ALPHAARG2 = 6,

    D3DTSS_BUMPENVMAT00 = 7,

    D3DTSS_BUMPENVMAT01 = 8,

    D3DTSS_BUMPENVMAT10 = 9,

    D3DTSS_BUMPENVMAT11 = 10,

    D3DTSS_TEXCOORDINDEX = 11,

    D3DTSS_BUMPENVLSCALE = 22,

    D3DTSS_BUMPENVLOFFSET = 23,

    D3DTSS_TEXTURETRANSFORMFLAGS = 24,

    D3DTSS_COLORARG0 = 26,

    D3DTSS_ALPHAARG0 = 27,

    D3DTSS_RESULTARG = 28,

    D3DTSS_CONSTANT = 32, //给当前纹理一个固定的值；

    D3DTSS_FORCE_DWORD = 0x7fffffff

} D3DTEXTURESTAGESTATETYPE;

 

Value又包括二个：D3DTEXTUREOF和D3DTA.( Can be either an operation (D3DTEXTUREOP) or an argument value (D3DTA), depending on what is chosen for Type.)

D3DTEXTUREOF:

D3DTOP_DISABLE = 1,                           //该纹理无效，既不显示
    D3DTOP_SELECTARG1 = 2,                  //选择第1个颜色值（既D3DTSS_COLORARG1的值）作为纹理颜色输出
    D3DTOP_SELECTARG2 = 3,                  //选择第2个颜色值（既D3DTSS_COLORARG2的值）作为纹理颜色输出
    D3DTOP_MODULATE = 4,                    //将颜色1和颜色2相乘作为纹理颜色输出
    D3DTOP_MODULATE2X = 5,               //将颜色1和颜色2相乘后左移1bit（用于增亮）作为纹理颜色输出 ，
    D3DTOP_MODULATE4X = 6,               //将颜色1和颜色2相乘后左移2bit（用于增亮）作为纹理颜色输出
    D3DTOP_ADD = 7,                                 //将颜色1和颜色2相加作为纹理颜色输出
    D3DTOP_ADDSIGNED = 8,                  ///////////后面的参见SDK 都是对2个颜色进行运算
    D3DTOP_ADDSIGNED2X = 9,
    D3DTOP_SUBTRACT = 10,
    D3DTOP_ADDSMOOTH = 11,
    D3DTOP_BLENDDIFFUSEALPHA = 12,
    D3DTOP_BLENDTEXTUREALPHA = 13,
    D3DTOP_BLENDFACTORALPHA = 14,
    D3DTOP_BLENDTEXTUREALPHAPM = 15,
    D3DTOP_BLENDCURRENTALPHA = 16,
    D3DTOP_PREMODULATE = 17,
    D3DTOP_MODULATEALPHA_ADDCOLOR = 18,
    D3DTOP_MODULATECOLOR_ADDALPHA = 19,
    D3DTOP_MODULATEINVALPHA_ADDCOLOR = 20,
    D3DTOP_MODULATEINVCOLOR_ADDALPHA = 21,
    D3DTOP_BUMPENVMAP = 22,
    D3DTOP_BUMPENVMAPLUMINANCE = 23,
    D3DTOP_DOTPRODUCT3 = 24,
    D3DTOP_MULTIPLYADD = 25,
    D3DTOP_LERP = 26,
    D3DTOP_FORCE_DWORD = 0x7fffffff,

 

D3DTA:
     这里的TA指的是texture arguments ，
      D3DTA_CONSTANT             //给当前纹理一个固定的值；
      D3DTA_DIFFUSE；               //diffuse的值作为参数 diffuse 可能有多个来源比如材质，vertex
      D3DTA_SELECTMASK         //Mask value for all arguments; not used when setting texture arguments 这句话不理解啊，为什么要伪装呢   
      D3DTA_SPECULAR             //取spercular 的值作为参数  来源同diffuse
      D3DTA_TEMP                     //待定
      D3DTA_TEXTURE              //用纹理的颜色值作为参数
      D3DTA_TFACTOR              //待定

 

参数太多，头都大了，晕呼呼的…

学习纹理：
要逆向思维，先学习HLSL,再回头看SetTextureStageState？？

HRESULT SetTextureStageState(          DWORD Stage,
    D3DTEXTURESTAGESTATETYPE Type,
    DWORD value
);
这个函数 的第二个参数和第三个参数 组合太多了...搞糊涂了..
第二个参数枚举类型
typedef enum _D3DTEXTURESTAGESTATETYPE {
    D3DTSS_COLOROP = 1,
    D3DTSS_COLORARG1 = 2,
    D3DTSS_COLORARG2 = 3,
    D3DTSS_ALPHAOP = 4,
    D3DTSS_ALPHAARG1 = 5,
    D3DTSS_ALPHAARG2 = 6,
    D3DTSS_BUMPENVMAT00 = 7,
    D3DTSS_BUMPENVMAT01 = 8,
    D3DTSS_BUMPENVMAT10 = 9,
    D3DTSS_BUMPENVMAT11 = 10,
    D3DTSS_TEXCOORDINDEX = 11,
    D3DTSS_BUMPENVLSCALE = 22,
    D3DTSS_BUMPENVLOFFSET = 23,
    D3DTSS_TEXTURETRANSFORMFLAGS = 24,
    D3DTSS_COLORARG0 = 26,
    D3DTSS_ALPHAARG0 = 27,
    D3DTSS_RESULTARG = 28,
    D3DTSS_CONSTANT = 32,
    D3DTSS_FORCE_DWORD = 0x7fffffff
} D3DTEXTURESTAGESTATETYPE;

第三个参数涉及到的枚举类型之一
typedef enum _D3DTEXTUREOP {
    D3DTOP_DISABLE = 1,
    D3DTOP_SELECTARG1 = 2,
    D3DTOP_SELECTARG2 = 3,
    D3DTOP_MODULATE = 4,
    D3DTOP_MODULATE2X = 5,
    D3DTOP_MODULATE4X = 6,
    D3DTOP_ADD = 7,
    D3DTOP_ADDSIGNED = 8,
    D3DTOP_ADDSIGNED2X = 9,
    D3DTOP_SUBTRACT = 10,
    D3DTOP_ADDSMOOTH = 11,
    D3DTOP_BLENDDIFFUSEALPHA = 12,
    D3DTOP_BLENDTEXTUREALPHA = 13,
    D3DTOP_BLENDFACTORALPHA = 14,
    D3DTOP_BLENDTEXTUREALPHAPM = 15,
    D3DTOP_BLENDCURRENTALPHA = 16,
    D3DTOP_PREMODULATE = 17,
    D3DTOP_MODULATEALPHA_ADDCOLOR = 18,
    D3DTOP_MODULATECOLOR_ADDALPHA = 19,
    D3DTOP_MODULATEINVALPHA_ADDCOLOR = 20,
    D3DTOP_MODULATEINVCOLOR_ADDALPHA = 21,
    D3DTOP_BUMPENVMAP = 22,
    D3DTOP_BUMPENVMAPLUMINANCE = 23,
    D3DTOP_DOTPRODUCT3 = 24,
    D3DTOP_MULTIPLYADD = 25,
    D3DTOP_LERP = 26,
    D3DTOP_FORCE_DWORD = 0x7fffffff
} D3DTEXTUREOP;
和D3DTA参数..
谁能详细的介绍下这个函数的功能和作用..以及参数的组合

下面的代码实现怎样的效果啊..看不懂
g_pd3dDevice->SetTexture( 0, g_pTexNormal ); 
 g_pd3dDevice->SetTexture( 1, g_pTexDiffuse ); 
g_pd3dDevice->SetSamplerState( 0, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR ); 
g_pd3dDevice->SetSamplerState( 1, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR ); 
g_pd3dDevice->SetTextureStageState( 0, D3DTSS_TEXCOORDINDEX, 0 ); 
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_TEXCOORDINDEX, 0 );

DWORD dwFactor = VectortoRGBA( &g_vLight, 0.0f ); 
 g_pd3dDevice->SetRenderState( D3DRS_TEXTUREFACTOR, dwFactor ); 
g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG1, D3DTA_TEXTURE ); 
g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLOROP,   D3DTOP_DOTPRODUCT3 ); 
g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG2, D3DTA_TFACTOR );

g_pd3dDevice->SetTextureStageState( 1, D3DTSS_COLOROP,   D3DTOP_MULTIPLYADD ); 
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_COLORARG1, D3DTA_TEXTURE );
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_COLORARG2, D3DTA_CURRENT );
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_ALPHAOP,   D3DTOP_SELECTARG1 );
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_ALPHAARG1, D3DTA_TEXTURE );

///////////////////////////////////////////////////////

功能差不多就是用第一张做凸凹纹理，加上第2层纹理的颜色
//这个是法线贴图
g_pd3dDevice->SetTexture( 0, g_pTexNormal ); 
//这个是漫反射贴图
 g_pd3dDevice->SetTexture( 1, g_pTexDiffuse ); 
//纹理采样方式
g_pd3dDevice->SetSamplerState( 0, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR ); 
g_pd3dDevice->SetSamplerState( 1, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR ); 
//两个纹理都使用0号纹理坐标
g_pd3dDevice->SetTextureStageState( 0, D3DTSS_TEXCOORDINDEX, 0 ); 
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_TEXCOORDINDEX, 0 ); 
//把光向量转成AGBA格式
DWORD dwFactor = VectortoRGBA( &g_vLight, 0.0f ); 
//你就这样理解下一句吧，这里设置一张纹理，纹理所有像素颜色读是上一句转换的RGBA颜色
 g_pd3dDevice->SetRenderState( D3DRS_TEXTUREFACTOR, dwFactor ); 

//下面把纹理0设置为该阶段纹理混合第一个参数，操作方式为向量点乘，第2个参数为上面设置的factor"纹理“
g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG1, D3DTA_TEXTURE ); 
g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLOROP,   D3DTOP_DOTPRODUCT3 ); 
g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG2, D3DTA_TFACTOR );
//把第2层纹理和上面合成的纹理乘法叠加，然后再和上面合成的纹理相加
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_COLOROP,  D3DTOP_MULTIPLYADD ); 
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_COLORARG1, D3DTA_TEXTURE );
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_COLORARG2, D3DTA_CURRENT );
//透明处理，透明度以第2层纹理的alpha值为准
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_ALPHAOP,   D3DTOP_SELECTARG1 );
g_pd3dDevice->SetTextureStageState( 1, D3DTSS_ALPHAARG1, D3DTA_TEXTURE );
//-------没时间了，要去做饭了。。可能还没说清楚哈

法线贴图产生凸凹纹理

 

本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/zdl1016/archive/2007/05/24/1624276.aspx