linux下使用adb devices

linux下使用adb devices一些相关的搜集

ubuntu 9.04使用adb无法连接g1的解决办法

http://www.hiapk.com/bbs/thread-3342-1-1.html

adb , ubuntu , 办法 , 解决

在ubuntu 9.04下通过usb连接g1，使用adb时，会返回无法找到设备，解决办法如下： 1) 在终端运行 lsusb 会发现结果有会有如下类似记录: Bus 002 Device 015: ID 0bb4:0c02 High Tech Computer Corp. 2) sudo gedit /etc/udev/rules.d/50-android.rules 在打开的文件中增加以下文本： SUBSYSTEM==”usb”, SYSFS{ “High Tech Computer Corp. “ }==”0bb4″, MODE=”0666″ 3) sudo gedit /etc/udev/rules.d/90-android.rules 在打开的文件中增加以下文本： SUBSYSTEM==”usb”, ATTR{ “High Tech Computer Corp. “ }==”0bb4″, MODE=”0666″ 4) 运行以下命令： sudo chmod a+rx /etc/udev/rules.d/50-android.rules sudo chmod a+rx /etc/udev/rules.d/90-android.rules sudo /etc/init.d/udev restart 5) 在android sdk的tools 目录下运行 sudo ./adb kill-server sudo ./adb devices OK~搞定，接下来使用./adb shell等指令都正常了！ Here's what works for me on Ubuntu Karmic with my Htc Dream (Vendor ID 0bb4 as seen with 'lsusb') : - device in usb debug mode (settings/applications/developpment/) - in file /etc/udev/rules.d/51-android.rules : SUBSYSTEM=3D=3D=E2=80=9Dusb=E2=80=9D,ATTRS(idVendor)=3D=3D=E2=80=9D0bb4=E2= =80=9C,SYMLINK +=3D"android_adb",MODE=3D=E2=80=9D0666=E2=80=B3 - chmod a+x /etc/udev/rules.d/51-android.rules (don't think it's necessary, though) - killall adb - /etc/init.d/udev restart ; /etc/init.d/udev-finish restart - adb in $PATH Now 'adb devices' lists my device. http://www.johandekoning.nl/index.php/2009/02/07/android-dev-phone-ubuntu-and-vmware-server/ Udev configuration You can perform a check, to see that the Android Dev Phone is shared with Ubuntu, by opening a Terminal (inside Ubuntu. Open a VMWare Remote Console to make use of the Ubuntu) and type the following command lsusb A list of USB devices will be shown. For example: Bus 002 Device 001: ID ld6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bb4:0c02 High Tech Computer Corp. Bus 001 Device 001: ID ld6b:0002 Linux Foundation 2.0 root hub The Android Dev Phone is the device with the name High Tech Computer Corp (HTC). Make a note of the first part of the device ID (in this case 0bb4) because this is needed for the udev rule. Create a new file (as root) sudo gedit /etc/udev/rules.d/50-android.rules with the following content SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666" Make sure that the text after {idVendor} is the same as the device id found when using the lsusb command. Save and exit the editor To make execution of the rule possible, perform a chmod sudo chmod a+rx /etc/udev/rules.d/50-android.rules To make the rule active, restart udev sudo /etc/init.d/udev restart