设置ListCtrl列表控件其中某一行的字体和背景颜色

设置ListCtrl列表控件其中某一行的字体和背景颜色，可以最终达到如下效果：

操作步骤如下所示：

1.先添加一个自定义消息

 ON_NOTIFY ( NM_CUSTOMDRAW,IDC_V_H264_NALLIST, OnCustomdrawMyList )

注：在BEGIN_MESSAGE_MAP()和END_MESSAGE_MAP()之间。第二个参数是LIstCtrl的ID，第三个参数是消息响应函数。

2.下面是具体的函数。根据表格内容的不同，设置不同的背景颜色。

比如：“NAL负载类型”为SLICE的时候，背景为青色；为SPS的时候，背景为黄色；为PPS的时候，背景为咖啡色。

 //ListCtrl加颜色
 void CSpecialVH264Dlg::OnCustomdrawMyList ( NMHDR* pNMHDR, LRESULT* pResult )
 {
     //This code based on Michael Dunn's excellent article on
     //list control custom draw at http://www.codeproject.com/listctrl/lvcustomdraw.asp


     NMLVCUSTOMDRAW* pLVCD = reinterpret_cast<NMLVCUSTOMDRAW*>( pNMHDR );


     // Take the default processing unless we set this to something else below.
     *pResult = CDRF_DODEFAULT;


     // First thing - check the draw stage. If it's the control's prepaint
     // stage, then tell Windows we want messages for every item.
     if ( CDDS_PREPAINT == pLVCD->nmcd.dwDrawStage )
     {
         *pResult = CDRF_NOTIFYITEMDRAW;
     }
     else if ( CDDS_ITEMPREPAINT == pLVCD->nmcd.dwDrawStage )
     {
         // This is the notification message for an item.  We'll request
         // notifications before each subitem's prepaint stage.


         *pResult = CDRF_NOTIFYSUBITEMDRAW;
     }
     else if ( (CDDS_ITEMPREPAINT | CDDS_SUBITEM) == pLVCD->nmcd.dwDrawStage )
     {


         COLORREF clrNewTextColor, clrNewBkColor;


         int    nItem = static_cast<int>( pLVCD->nmcd.dwItemSpec );


         CString strTemp = m_vh264nallist.GetItemText(nItem,2);
         if(strcmp(strTemp,"SLICE")==0){
             clrNewTextColor = RGB(0,0,0);       //Set the text
             clrNewBkColor = RGB(0,255,255);     //青色
         }
         else if(strcmp(strTemp,"SPS")==0){
             clrNewTextColor = RGB(0,0,0);       //text
             clrNewBkColor = RGB(255,255,0);     //黄色
         }
         else if(strcmp(strTemp,"PPS")==0){
             clrNewTextColor = RGB(0,0,0);       //text
             clrNewBkColor = RGB(255,153,0);     //咖啡色
         }else if(strcmp(strTemp,"SEI")==0){
             clrNewTextColor = RGB(0,0,0);       //text
             clrNewBkColor = RGB(255,66,255);            //粉红色
         }else if(strcmp(strTemp,"IDR_SLICE")==0){
             clrNewTextColor = RGB(0,0,0);       //text
             clrNewBkColor = RGB(255,0,0);           //红色
         }else{
             clrNewTextColor = RGB(0,0,0);       //text
             clrNewBkColor = RGB(255,255,255);           //白色
         }


         pLVCD->clrText = clrNewTextColor;
         pLVCD->clrTextBk = clrNewBkColor;




         // Tell Windows to paint the control itself.
         *pResult = CDRF_DODEFAULT;




     }
 }