arengine BasicGeoprocessor 矢量图层叠加求交分析

矢量图层叠加求交分析

AE开发中，矢量图层叠加分析需要用到的主要类为BasicGeoprocessor，其主要接口为IBasicGeoprocessor。IBasicGeoprocessor接口提供了基本的空间数据处理的方法和属性，其中包括叠加求交（Interset）和叠加求和（Union)。

下面提供两个叠加求交的开发实例：

一、  VB+AE9.1叠加求交示例代码：

 

 1 Private   Sub  M_OverLayer_Click()
 2 '  Get the input layer and feature class
 3    Dim  pLayer  As  ILayer
 4    Set  pLayer  =  MapControl1.Layer( 0 )
 5    Dim  pInputFeatLayer  As  IFeatureLayer
 6    Set  pInputFeatLayer  =  pLayer
 7    '  Use the Itable interface from the Layer (not from the FeatureClass)
 8   
 9    Dim  pInputTable  As  ITable
10    Set  pInputTable  =  pLayer
11    '  Get the input feature class.
12    '  The Input feature class properties, such as shape type,
13    '  will be needed for the output
14   
15    Dim  pInputFeatClass  As  IFeatureClass
16    Set  pInputFeatClass  =  pInputFeatLayer.FeatureClass
17    '  Get the overlay layer
18    '  Use the Itable interface from the Layer (not from the FeatureClass)
19    Set  pLayer  =  MapControl1.Layer( 1 )
20    Dim  pOverlayTable  As  ITable
21    Set  pOverlayTable  =  pLayer
22   
23    '  Error checking
24    If  pInputTable  Is   Nothing   Then
25      MsgBox   " Table QI failed "
26      Exit   Sub
27    End   If
28   
29    If  pOverlayTable  Is   Nothing   Then
30      MsgBox   " Table QI failed "
31      Exit   Sub
32    End   If
33   
34    '  Define the output feature class name and shape type (taken from the
35    '  properties of the input feature class)
36    Dim  pFeatClassName  As  IFeatureClassName
37    Set  pFeatClassName  =   New  FeatureClassName
38    With  pFeatClassName
39     .FeatureType  =  esriFTSimple
40     .ShapeFieldName  =   " Shape "
41     .ShapeType  =  pInputFeatClass.ShapeType
42    End   With
43   
44    '  Set output location and feature class name
45    Dim  pNewWSName  As  IWorkspaceName
46    Set  pNewWSName  =   New  WorkspaceName
47   pNewWSName.WorkspaceFactoryProgID  =   " esriCore.ShapeFileWorkspaceFactory.1 "
48   pNewWSName.PathName  =   " C:/temp "
49   
50    Dim  pDatasetName  As  IDatasetName
51    Set  pDatasetName  =  pFeatClassName
52   pDatasetName.Name  =   " Intersect_result "
53    Set  pDatasetName.WorkspaceName  =  pNewWSName
54    '  Set the tolerance. Passing 0.0 causes the default tolerance to be used.
55    '  The default tolerance is 1/10,000 of the extent of the data frame's spatial domain
56   
57    Dim  tol  As   Double
58   tol  =   0 #       '  Perform the intersect
59    Dim  pBGP  As  IBasicGeoprocessor
60    Set  pBGP  =   New  BasicGeoprocessor
61   
62    Dim  pOutputFeatClass  As  IFeatureClass
63    Set  pOutputFeatClass  =  pBGP.Intersect(pInputTable,  False , pOverlayTable,  False , _
64     tol, pFeatClassName)
65     
66    '  Add the output layer to the map
67    Dim  pOutputFeatLayer  As  IFeatureLayer
68    Set  pOutputFeatLayer  =   New  FeatureLayer
69    Set  pOutputFeatLayer.FeatureClass  =  pOutputFeatClass
70   pOutputFeatLayer.Name  =  pOutputFeatClass.AliasName
71   MapControl1.AddLayer pOutputFeatLayer
72 End Sub
73
74
75

二、C#+AE9.1叠加求交示例代码：

 1          private   void  M_OverLayer_Click( object  sender, System.EventArgs e)
 2          {
 3            try
 4            {
 5                //分析层
 6                ILayer pLayer=this.axMapControl1.get_Layer(0);
 7                IFeatureLayer pInputFeatLayer=pLayer as IFeatureLayer;    
 8                ITable pInputTable=pLayer as ITable;
 9                IFeatureClass pInputFeatClass=pInputFeatLayer.FeatureClass;
10
11                //叠加表
12                pLayer=this.axMapControl1.get_Layer(1);
13                ITable pOverlayTable=pLayer as ITable;
14
15                //叠加分析表
16                IFeatureClassName pFeatClassName=new FeatureClassNameClass();
17                pFeatClassName.FeatureType=esriFeatureType.esriFTSimple;
18                pFeatClassName.ShapeFieldName="shape";
19                pFeatClassName.ShapeType=pInputFeatClass.ShapeType;
20
21                //工作空间名称
22                IWorkspaceName pNewWSName=new WorkspaceNameClass();
23                pNewWSName.WorkspaceFactoryProgID = "esriDataSourcesFile.ShapefileWorkspaceFactory";
24                pNewWSName.PathName = @"C:/temp";
25
26                //数据集名称
27                IDatasetName pDatasetName=pFeatClassName as IDatasetName;
28                pDatasetName.Name="ss";
29                pDatasetName.WorkspaceName=pNewWSName; 
30
31                //几何处理
32                IBasicGeoprocessor pBGP=new BasicGeoprocessorClass();
33                IFeatureClass pOutputFeatClass=pBGP.Intersect(pInputTable,false,pOverlayTable,false,0.01,pFeatClassName);  
34   
35                //输出要素层设置
36                IFeatureLayer pOutputFeatLayer=new FeatureLayerClass();
37                pOutputFeatLayer.FeatureClass=pOutputFeatClass;
38                pOutputFeatLayer.Name=pOutputFeatClass.AliasName;
39
40                this.axMapControl1.AddLayer((ILayer)pOutputFeatClass,0);
41                axMapControl1.Update();
42            }
43            catch(Exception ex)
44            {
45                MessageBox.Show(ex.Message);
46            }
47        }

来自:http://www.cnblogs.com/raymond19840709/archive/2007/01/12/618998.html