y4m wiki

YUV4MPEG2

• Extension: .y4m
• Samples: http://samples.mplayerhq.hu/yuv4mpeg2/

YUV4MPEG2 is a simple file format designed to hold uncompressed frames of YCbCr video formatted as YCbCr 4:2:0, YCbCr 4:2:2 or YCbCr 4:4:4 data for the purpose of encoding, likely to MPEG-2. The part "YUV" in its name just derives from the fact that the color space YCbCr (used for color encoding in digital media) is often falsely mixed up with the color space YUV (used in analog PAL based applications, including analog TV and video tapes).

[ edit]

Data Format

A Y4M file begins with a plaintext, quasi-freeform header. The first 10 bytes are a file signature of 'YUV4MPEG2 ' (last character is a space, ASCII 0x20). Following the signature is any number of parameters preceeded by a space (ASCII 0x20). The parameters that should definitely be present are width, height, and frame rate:

• frame width: 'W' followed by a plaintext integer; example: 'W720'
• frame height: 'H' followed by a plaintext integer; example: 'H480'
• frame rate: 'F' followed by the number of frames per second, expressed as a fraction in the form numerator:denominator. Examples:
  • 'F30:1' = 30 FPS
  • 'F25:1' = 25 FPS (PAL/SECAM standard)
  • 'F24:1' = 24 FPS (Film)
  • 'F30000:1001' = 29.97 FPS (NTSC standard)
  • 'F24000:1001' = 23.976 FPS (Film transferred to NTSC)
• interlacing: 'I' followed by a single letter to indicate interlacing mode:
  • 'Ip' = Progressive
  • 'It' = Top field first
  • 'Ib' = Bottom field first
  • 'Im' = Mixed modes (detailed in FRAME headers)
• Parameter 'A': Pixel aspect ratio. Note that this is not the ratio of the picture as a whole, just the pixels. Examples:
  • 'A0:0' = unknown
  • 'A1:1' = square pixels
  • 'A4:3' = NTSC-SVCD (480x480 stretched to 4:3 screen)
  • 'A4:5' = NTSC-DVD narrow-screen (720x480 compressed to a 4:3 display)
  • 'A32:27' = NTSC-DVD wide-screen (720x480 stretched to a 16:9 display)
• Parameter 'C': Colour space
  • 'C420jpeg' = 4:2:0 with biaxially-displaced chroma planes
  • 'C420paldv' = 4:2:0 with vertically-displaced chroma planes
  • 'C420' = 4:2:0 with coincident chroma planes
  • 'C422' = 4:2:2
  • 'C444' = 4:4:4
• Parameter 'X': Comment. Ignored, but passed, by a YUV4MPEG2 processor.

Following the header is any number of frames coded in YCbCr format in Y-Cb-Cr plane order. Each frame begins with the 5 bytes 'FRAME' followed by zero or more parameters each preceded by 0x20, ending with 0x0A. This is then followed by the raw bytes from each plane.

The length of each frame (excluding its header) can be computed as:

• frame length = width * height * 3 / 2 (4:2:0)
• frame length = width * height * 2 (4:2:2)
• frame length = width * height * 3 (4:4:4)